Best Auber in 2026

30 programable steps for ramp, soak and other logic actions

PID control with fuzzy logic enhancement for the best stability control

Display in either Fahrenheit or Celsius temperature unit

🥇🥇【Easy to use】 Supports °C/°F display.

🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.

🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.

Supports Centigrade or Fahrenheit unit display.

The sensor can easily be replaced.

Maximum output load: 1100W (120V).

Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.

Be able to connect with refrigeration and heating equipment at the same time.

Easily calibrated.

WE'VE IMPROVED THE TEMP CONTROLLER: This is NOT a humidity controller! Simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now. NO WIFI connection!

HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the settings and device you plug into the controller. NO wifi connection!

MAX LOAD: Rated for 10A,1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).

👍👍【Android & IOS WIFI App】WIFI APP - WIFI smart controller supports both IOS & Android. WIFI connection supports 2.4GHz Wi-Fi band with free “INKBIRD” APP to control the temperature remotely.

👍👍【Dual Relay Output】Dual relay - able to power refrigeration and heating equipment as conditions change.

👍👍【High/Low Temperature Alarm】 Set High/Low temperature alarm when the temperature is over or under preset temperature or the sensor experiences a malfunction.

✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.

✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.

✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.

Simplified Design---Plug and play, easy to set. Support °C/°F display.

Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)

Dual Display Window---Be able to display real-time temperature and set temperature at the same time.

Back draft damper for insertion into 4 inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct

A tight sealing and fastening of the duct is achieved by the rubber strip attached to the outside of the draft blocker damper. The rubber seal prevents loud rattling when the flap blades open and close. The housing of the flap is made of galvanized steel, the flap blades are made of aluminum, the axle and spring are made of stainless steel

Designed for use in AC, dryers, exhaust, extractor or range hoods, heating systems, vents and other residential, commercial and industrial HVAC applications

Simplified Design---Plug and play, easy to set. Support °C/°F display

Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1100W(110V)

Dual Display Window---Be able to display real-time temperature and set temperature at the same time.

Support reading with Centigrade or Fahrenheit unit.It is more suitable for setups with water cycle. If the device does not have water cycle, the ITC-100 series is recommended.

Dual display window, be able to display measured temperature and set temperature at the same time

Simplify operational processes and you don't need to operate more steps if you want to set the definite value

It does indeed read in deg F.

Can control both heating and cooling output

Has an alarm to indicate sensor failure or high temperature

💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.

💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.

💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.

🏆🏆【Excellent Value for Money】Dual Probes, Dual Outlets, Dual Zones Control, it's a Dual Controllers in ONE Unit. More than DOUBLE the functionality of other thermostats!

🍺🍺【Incredibly Easy Setup】Just need to set outlet 1 turn ON at A temp point, turn OFF at B temp point, and set outlet 2 turn ON at C temp point, turn OFF at D temp point, then outlet 1 will control temp in the range of A~B, and outlet 2 will control temp in the range of C~D.

🔥💦【Flexible Heating/Cooling】Heating+Coloing, Heating+Heating, Cooling+Heating, Cooling+Cooling, any combination as you want.

★★★★★ 「Think different, think simple」 You are able to set every outlet(attached to heater/fan) to turn on at a certain temp, and turn off at another temp.

★★★★★ 「2 controllers in one unit」Two outlets are individually separate, each supports heating & cooling. With two waterproof sensors, you can set different temps to control different areas, such as with 2 heat lamps/mats for 2 zones or even for 2 tanks.

★★★★★ 「Safe and Reliable」High and low temperature alarm, and temperature difference alarm, keep your target secure.

Brand name:Titan Controls

Assembly not required

Made in China

Great for turning a chest freezer into a keg refrigerator

Easy to set up and use

Plug unit into wall and then run the sensor into your freezer

【Relay output, easy to use】 Plug-and-play design, just plug the device into this thermostat plug outlet and set parameters, it will work as programmed. Power supply: 120V±15% AC; Output:Max 15A/120V.

【Easy to program】 Just set start temperature and stop temperature, this plug in thermostat will work in heating or cooling mode. Temperature control range:-40℉~248℉(-40℃~120℃), temperature control accuracy: ±1%. Celsius and Fahrenheit can be converted. This digital temeprature controller also supports temperature calibration if needed.

【Timing function】 F01 Cycle Timer mode; F02 Countdown ON mode, F03 Countdown OFF mode, F04 Countdown ON and Countdown OFF mode. You can choose F01 mode to control the device to work in cycles, or choose F02~F04 modes to countdown to turn on or turn off the device. Set range: 0~99 hours 59 minutes. Please note that temperature control function and timing function cannot be used at the same time.

Simplified Design---Easy to set. Support °F display

One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)

Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration

100% complete machine patch, wave soldering, stable performance, good consistency.

Embedded CPU chip (MCU), more intelligent, lower power consumption.

Automatic power set memory (MCU built-in EEPROM memory unit).

【Output】2 Relays, control the temperature by setting the temperature set value and the difference value.

【Mode】Automatic switch between cooling and heating modes, Fahrenheit and Celsius display can be choose.

【Calibration】Temperature calibrating, refrigerating control output delay protection.

🐊【Ideal Temperature Control】The temperature controller can regulate and maintain your preferred temperature within a control range from -40~248ºF. The temperature controlled outlet comes with a sensor probe to reliably track the temperature.

🍻【Plug-and-Play】The thermostat outlet is easy to use 3 buttons to set up temperature between Fahrenheit/Celsius according to your using habit.

🌱【Convenient Design】With illuminated LED display, the greenhouse thermostat is easy to read and program even in darkness. And you can hang the temperature controller on the wall or hooks to keep cords untangled and neat.

♦ Dual Display: This PID temperature controller has dual display for Fahrenheit (F) and Celsius(C). The AGPtEK temperature controller supports reading with Centigrade or Fahrenheit unit.

♦ PID Control: Individually programmable PID control parameters, P, I, d, controlling period, digital filter coefficient, and more… (for control theory experts only)

♦ Dual Output: 7 different Dual Output combinations with 1 relayed output and 1 SSR control voltage output.

Auto converts cooling and heating modes to keep your equipments in an ideal temperature range.

DIY design use wiring diagram, the more economical and practical choice

The temperature sensor from Shibaura Japan,temperature control range from -50℃ to 99℃, accuracy:±1℃

Equipped with dual LED display, it is more suitable for the device with water circulation. If the unit does not have water circulation, please purchase itc-100 series

Offers display options of Centigrade and Fahrenheit

Enabling more humanized temperature control

🎉🎉Support reading with Centigrade or Fahrenheit unit.It is more suitable for setups with water cycle. If the device does not have water cycle, the ITC-100 series is recommended.

🎉🎉Dual display window, be able to display measured temperature and set temperature at the same time

🎉🎉Simplify operational processes and you don't need to operate more steps if you want to set the definite value

🙌🙌【Plug-n-Play Easy Operation】The electric home brewing controller is an all-in-one machine and no more installation is needed. Just plug in and set up the system according to your needs.

🙌🙌【Precise Control】PID digital controller provides accurate temperature control at the range of -50~125℃/ -58~257℉, and the accuracy of the temperature is ±0.1℃ or ±0.2℉.

🙌🙌【Independent Pump Function】The Pump Function is special designed for home brewing customers and it can be operated separately, just access your pump and press the “Pump” button when you need it.

Multi-use temperature data logger,high accuracy sensor,up to 32,000 recording points

A wide measuring range:-22℉~158℉;accuracy:±0.9℉

Built-in USB connector, no cable required to download and manage data

Single-stage controls

Single-pole

Double-throw

DROK electronic thermostat controller power supply is DC 6-30V or 5V micro USB; control load current is 10A (Max); test temperature is -50~110℃; sensor length is 0.5 meter.

High current: Our digital temperature control board adopts high density PC board installation technology, the switch capacity can be up to 10A in spite of the small size.

LCD display: Designed with bright LCD display, people can check the temperature clearly from any angle.