Best Auctmarts in 2026

Most riders settle for faded, scratched-up factory plastics when their bike starts showing its age, but this Auctmarts injection fairing kit offers a complete aesthetic rebirth for the Suzuki GSX1300R Hayabusa. Instead of hunting down individual panels, you get a comprehensive ABS plastic bodywork set that arrives with pre-drilled holes to ensure a guaranteed fitment. What really sets this package apart is the sheer volume of extras included. You aren't just getting fairings, but also a windscreen, tank pad, heat shield, a bolt kit, and even extra Pro H coating. While you should plan for a three to four week shipping window and be prepared to handle customs fees upon arrival, the value of getting a full transformation kit in one go is hard to beat for any Hayabusa enthusiast.

Most riders settle for a vibrating, loose fairing and a rattling windshield, but this brass insert repair kit offers a definitive fix for that annoying play. Instead of dealing with stripped threads or loose hardware, you can restore the structural integrity of your 1996 to 2016 Batwing setup. The kit includes ten replacement brass inserts and a dedicated installation tool, making the process surprisingly straightforward. Because these inserts are self-tapping, you can skip the tedious pre-drilling and tapping steps entirely. There is no need to mess around with messy adhesives either. The inserts bite in so tightly that they won't spin or back out during your ride. It is a practical, high-impact solution for keeping your cockpit stable and secure.

After weeks of use on long-distance highway hauls, these XFMT matte black leg fairings have proven to be a practical upgrade for any vintage Harley touring setup. The ABS plastic construction feels sturdy enough to handle wind pressure, and the matte finish provides a sleek, modern look that integrates well with the bike's aesthetic. Installation is straightforward for most models, though you should note that 1998-2009 FLTR owners will need to trim about 2.5 inches off the upper cap cover to ensure proper clearance. It acts as a direct replacement for factory components, offering a functional glove box area to keep essentials handy. Just be sure you aren't running a Mustache Engine Guard, as that will cause fitment issues.

Why settle for wind-blasted legs when you can upgrade your touring ride with a sleek, functional aesthetic? These XFMT lower fairing caps bring a polished, vivid black gloss finish to your Harley, providing that essential vented protection for long hauls. They are designed to fit a wide range of touring models from 1983 to 2013, including the Road King and Street Glide, provided you are running a stock crash bar. While most installations are straightforward, owners of 1998-2009 FLTR models will need to trim about 2.5 inches off the upper cap to clear the fairing bracket. Just keep in mind that you'll need to source your own mounting hardware, as this kit focuses strictly on the left and right fairing components themselves.

Moto Onfire has delivered a high-performance upgrade for Harley Touring riders that fundamentally transforms both the aesthetics and utility of your ride. These lower vented fairings in Denim Black offer a seamless look for air-cooled models, providing much-needed airflow via integrated slider vents while adding practical storage through left and right glove boxes. The real game-changer is the versatility of the 6.5-inch speaker pods. They are designed for easy installation and detachment, allowing you to upgrade your audio setup without a massive headache. While you will need to provide your own speaker grills, the kit includes everything from mounting screws to clamps to ensure a smooth transition. It is a comprehensive overhaul that balances rugged style with functional ergonomics for the long haul.

Long-distance touring riders demanding better airflow and superior audio integration will find these Moto Onfire Rushmore leg warmers absolutely essential for their next trip. These fairings transform the lower profile of your Street Glide or Road Glide by adding much-needed ventilation via the slider vent controls. The Vivid Black finish is mixed to factory standards, ensuring a professional look that blends seamlessly with your bike's paint. I love the versatility here. You can swap between functional glove box storage and the included 6.5-inch speaker pods depending on your riding needs. While you'll need to provide your own speaker grills and avoid Boom audio due to size constraints, the ease of mounting with the included hardware makes this a high-impact upgrade for any air-cooled touring model.

Moto Onfire Lower Vented Fairings deliver a striking color-matched aesthetic that transforms the profile of your Harley Touring rig. The Velocity Red Sunglo finish is mixed using factory color standards, ensuring a seamless look that avoids the 'aftermarket' feel most riders dread. These fairings are incredibly versatile, offering slider vent controls for airflow management and integrated glove box storage for your essentials. The standout upgrade is the 6.5-inch speaker pod system. While you'll need to provide your own speaker grills, the pods are designed for easy installation and mounting. It is a comprehensive kit that includes everything from mounting screws to clamps, making it a complete solution for riders looking to upgrade their Road Glide or Street Glide with better audio capability and improved utility.

Harley Touring riders looking to overhaul their cockpit ergonomics and audio setup should stop searching for these Moto Onfire lower fairings. The Big Blue Pearl finish is mixed using factory color standards, ensuring a seamless look that doesn't feel like an afterthought. What really sets this kit apart is the versatility. You can swap between functional glove box storage and 6.5-inch speaker pods depending on your riding needs. The inclusion of slider vent controls and a complete mounting hardware kit makes the installation process much smoother than typical aftermarket parts. Just keep in mind that while most 6.5-inch speakers fit perfectly, you'll need to provide your own grills, and Boom audio units are too large for these specific pods.

Long-distance Touring riders facing engine heat and lackluster audio need this specific upgrade to transform their ride quality. This XFMT kit replaces standard lower fairings with a functional, vented ABS plastic design that lets you manually control airflow to your legs and the engine. It is a dual-purpose solution because it integrates 6.5-inch speaker pods directly into the fairings, which helps project your music forward toward both the rider and passenger rather than letting it dissipate. The vivid black finish looks sharp right out of the box, and while the installation is straightforward, you must double-check your specific model compatibility—especially if you run mustache engine guards or specific knockout wheel kits. It is a practical, budget-friendly way to boost both comfort and sound.

XFMT delivers a high-value upgrade for air-cooled touring riders looking to tame the wind and heat. These aftermarket lowers are crafted from durable ABS plastic with a sleek Vivid Black finish that integrates seamlessly into your bike's aesthetic. What really sets this kit apart is the functional venting system, which lets you dial in the airflow to your legs for much better riding comfort on long hauls. I also found the integrated glove box to be a massive convenience, providing a dedicated spot for sunglasses or maps right within arm's reach. While the installation is straightforward with the included hardware, keep a close eye on your specific engine guard and model compatibility to ensure a perfect fit.

XFMT Lower Vented Leg Fairings transform your touring bike's profile while adding a massive audio upgrade via integrated 6.5-inch speaker pods. These aftermarket pieces are crafted from high-quality ABS plastic and arrive in a sleek, vivid black painted finish that looks ready for the road right out of the box. They are designed to fit a wide range of Harley touring models from 1983 to 2013, including the Road King and Street Glide, provided you have a stock crash bar. If you are running a 1998-2009 Road Glide, you can still make these work by trimming 2.5 inches off the upper cap cover. It is a smart, cost-effective way to improve both wind deflection and your sound system performance without a massive custom shop bill.

Most riders ignore the deteriorating rubber around their dashboard until wind noise and debris start invading the cockpit, but this ZXMOTO trim seal offers a proactive fix for aging fairings. I found that replacing cracked, weathered seals with this premium rubber strip immediately restores that tight, factory-fresh feel to the inner fairing. It is specifically engineered for a wide range of Harley Davidson touring models, spanning from 1996 through 2013, including the Street Glide and Electra Glide. The 39-inch length provides ample coverage, and because the material is highly flexible, it contours easily to the speedometer housing without fighting you during installation. It is a straightforward, direct replacement that keeps your instrumentation protected and your ride much quieter.

Most riders assume that adding lighting to a motorcycle is strictly about visibility, but the Kuryakyn Front Fairing Vent Accent Kit proves that illumination is actually a high-end styling tool. By tucking a soft glow directly into the Rushmore batwing fairing vents, you add a sense of visual depth that standard chrome alone can't achieve. The chrome finish integrates seamlessly with your existing hardware, making the upgrade look like a factory-installed feature rather than an afterthought. Installation is remarkably straightforward thanks to the plug-and-play wiring, which means you won't be stuck in the garage with a complex wiring harness all afternoon. It is a simple, effective way to make your Electra Glide or Street Glide stand out during night cruises without cluttering the bike's silhouette.

The deep, gloss black finish on these XFMT leg fairings catches the light instantly, making them a striking addition to any classic touring bike. Swapping out your stock setup for this kit provides a massive upgrade to both airflow and your audio experience. The high-quality ABS plastic feels substantial, and the included 6.5-inch speakers with matching pods and grills turn your lower fairings into a legitimate sound stage. While the package doesn't include a step-by-step manual, the mounting kit is included to help you get everything secured. It is a comprehensive overhaul for anyone riding an 83-13 Touring model or Trike looking to refresh their aesthetic and crank up the volume on long highway stretches.

The XMT-MOTO Vivid Black Lower Vented Leg Fairings transform your touring bike's profile while integrating high-performance audio capability. These aftermarket fairings are crafted from high-quality ABS plastic, providing a durable and sleek finish that complements classic Harley-Davidson styling. What makes this kit particularly impressive is the inclusion of 6.5-inch speaker box pods, allowing you to upgrade your sound system without sacrificing aesthetics. They are designed to fit a wide range of touring models from 1983 to 2013, including Road King and Street Glide variants, provided you have a stock crash bar. While most models install seamlessly, those with a 1998-2009 FLTR might require a minor trim to the upper cap cover for a perfect fit. It is a practical, stylish upgrade for any rider looking to enhance both comfort and audio presence.

Long-distance Harley touring riders demanding better airflow and a sleeker profile should stop looking elsewhere. This XMT-MOTO kit provides a practical, matte black upgrade for a wide range of models from 1983 to 2013, including the Road King and Street Glide. Constructed from durable ABS plastic, these vented fairings are designed to integrate seamlessly with your stock crash bars. While most models will bolt right on, keep in mind that 1998-2009 Road Glide owners will need to trim about two and a half inches off the upper cap cover to ensure proper clearance for the fairing bracket. It is a straightforward, budget-friendly way to refresh the look of your Electra Glide or Ultra Limited without breaking the bank.

The dull, weathered plastic of an aging dashboard disappears the moment you install this TCMT speedometer cover. If your inner fairing has seen better days or is covered in unsightly scratches, this cowl provides an immediate custom upgrade that refreshes the entire cockpit. It is a practical solution for riders looking to replace worn-out components with a cleaner, more intentional aesthetic. While it fits 2008-2013 FLHX, FLHTC, and FLHTCU models perfectly, those working with 1996-2007 models should keep some instrument gauge plugs handy to ensure a seamless finish. At just over a hundred dollars, it is a straightforward way to protect your gauges while instantly elevating the look of your touring bike.

The aggressive matte black finish immediately transforms the silhouette of your touring bike, giving it a much more modern, custom edge. These TCMT leg fairings are built from durable ABS plastic and serve a dual purpose by adding much-needed ventilation for your legs while providing a practical glove box for small essentials. Installation is straightforward for most riders, especially those running stock crash bars on models from 1983 to 2013. If you are running a 1998-2009 FLTR, just be prepared to trim about 2.5 inches off the upper cap cover to clear the bracket. They offer a solid, functional upgrade that feels substantial once bolted into place, making them a smart choice for long-distance riders looking to improve both comfort and style.

Most riders assume upgrading their touring bike's aesthetics requires a massive overhaul, but a simple change to the lower fairings can completely transform the silhouette of an older Electra Glide. These Green-L ABS plastic fairings offer a sleek, vivid black finish that blends seamlessly with classic Harley touring models from 1983 through 2013. While they are designed to work with stock crash bars, there is a bit of a workaround for the 1998-2009 FLTR owners. You'll need to trim about 2.5 inches off the upper cap cover to clear the bracket. Just keep in mind that these are specialized pieces that do not include speaker pods and won't play nice with Mustache Engine Guards, so check your existing setup before diving in.

Why settle for cracked, faded plastics when a full aesthetic refresh is this accessible? This seven-piece fairing kit from Kids ATV Parts is a lifesaver for anyone running a Honda XR50, CRF50, or a compatible Chinese pit bike like an SSR or SDG. Instead of hunting down individual components, you get a complete overhaul including front and rear fenders, tank side covers, side panels, and even a number plate. The black finish provides a sleek, unified look that hides trail grime effectively, though the availability of eight different colors means you can truly customize your ride's personality. It is a straightforward, comprehensive solution for riders looking to restore their bike's bodywork without breaking the bank.

Standard Sportster setups often lack the aggressive, aerodynamic profile needed to deflect wind without sacrificing that classic cruiser aesthetic. This XFMT quarter fairing solves that by offering a sleek, racy design that instantly transforms your bike's silhouette. Built from sturdy ABS plastic with a clear Plexiglas windshield, it features a clever two-position adjustment so you can fine-tune your airflow on the fly. The detachable nature is a massive win for riders who want a sporty look for highway stints but prefer a stripped-down appearance for city cruising. Just keep in mind that you will need to source a specific docking hardware kit separately, as this kit focuses on the fairing and windshield components themselves rather than the mounting hardware.

After weeks of use on long highway stretches, the difference in ride quality from this Krator kit is unmistakable. The smoke-finished ABS plastic doesn't just look aggressive against a blacked-out build. It actually does the heavy lifting when it comes to cutting through wind turbulence. I noticed a significant reduction in fatigue across my chest and arms, allowing for much more confident high-speed stability. While the direct fitment for the T-Sport FXDXT is seamless, owners of older Dyna or FXR models should be prepared to do a little bit of custom work to get it mounted perfectly. It is a comprehensive package that includes the headlight bracket and all necessary hardware, making it a solid upgrade for anyone looking to transition to that classic club style aesthetic.