Best Audiozerone in 2026

Power - 2000 Watts MAX x 1 @1-Ohm, 1000 Watts RMS x 1 @1-Ohm, 650 Watts RMS x 1 @2-Ohms,400 Watts RMS x 1 @4-Ohms

Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry

1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to

Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms

Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal

Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry

Class D MOSFET Monoblock Power Amplifier

Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts

Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz

The Punch P500X1bd is a full chassis (2.38” x 7.76” x 11.03”) mono amplifier optimized for subwoofers only, capable of 500 Watts into a 1-Ohm load

Class-BD technology produces bass more efficiently over traditional amps (RMS Power Output: 150 Watts x 1 @ 4-Ohm OR 300 Watts x 1 @ 2-Ohm OR 500 Watts x 1 @ 1-Ohm)

RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter

Our ultra-compact (1.53” x 4.25” x 6.75”) Punch PBR300X2 2-channel amplifier packs a Punch with 300 Watts of power without sucking a lot of juice from your electrical system

Designed to be compact and efficient while providing big power (RMS Power Output: 100 Watts x 2 @ 4-Ohm OR 150 Watts x 2 @ 2-Ohm OR 300 Watts x 1 @ 4-Ohm Bridged)

Featuring our Class BR, Rockford Fosgate’s patented Boosted Rail technology that sips current while retaining a storage reserve for extended bursts of power. Perfect for smaller stealth installations, motorcycles and recreational vehicles

Our ultra-compact (1.53” x 4.25” x 6.75”) Punch PBR300X1 mono amplifier packs a Punch with 300 Watts of power without sucking a lot of juice from your electrical system

Designed for compact subwoofer systems that requires little space (RMS Power Output: 75 Watts x 1 @ 4-Ohm OR 150 Watts x 1 @ 2-Ohm OR 300 Watts x 1 @ 1-Ohm)

Featuring our Class BR, Rockford Fosgate’s patented Boosted Rail technology that sips current while retaining a storage reserve for extended bursts of power. Perfect in motorcycles, ATVs and hybrid-electric vehicles

500-Watt MOSFET 4-Channel Class A/B Power Car Amplifier

RMS Power at 2 Ohms: 125 Watts x 4 Channels

RMS Power at 4 Ohms: 75 Watts x 4 Channel

Kicker CX Series CXA1800.1

Class-D 2-Ohm Stable Monoblock Amplifier

RMS Power Rating: 4 ohms: 900 watts x 1 chan. 2 ohms: 1800 watts x 1 chan.

The R2-500X1 full-range class-D mono amplifier (1.9" x 6.8" x 8.5") is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power

Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 300 Watts x 1 @ 4Ω OR 500 Watts x 1 @ 2Ω)

Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass

The R2-300X4 full-range class-D 4-channel amplifier (1.9" x 6.8" x 10.1") is packed with features and performance to deliver power and bass on demand with 300 Watts of RMS power

Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 50 Watts x 4 @ 4Ω OR 75 Watts x 4 @ 2Ω OR 150 Watts x 2 @ 4Ω Bridged/Mono)

Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass

Car audio amplifier with 700 watts RMS power at 1-ohm load (14.4v); 380 watts RMS at 2-ohm load (14.4v); 200 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)

Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 700 watt amplifier absolutely pounds

Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system

Max Power 1000W

Variable Low Pass Filter

Bass Boost

Get clear, powerful sounds in your vehicle with the Kicker 1200 W Mono Amplifier

RMS Power:

600 Watt x 1 channel @ 4 Ohm

The Punch P1000X1bd is a full chassis (2.38” x 7.76” x 13.28”) mono amplifier optimized for subwoofers only, that pumps out a whopping 1,000 Watts into a 1-Ohm load

Class-BD technology produces bass more efficiently over traditional amps (RMS Power Output: 300 Watts x 1 @ 4-Ohm OR 500 Watts x 1 @ 2-Ohm OR 1000 Watts x 1 @ 1-Ohm)

RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter

The R2-750X5 full-range class-D 5-channel amplifier (1.9" x 6.8" x 11.2") is packed with features and performance to deliver power and bass on demand with 750 Watts of RMS power

Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 50 Watts x 4 + 200 Watts x 1 @ 4Ω OR 100 Watts x 4 + 350 Watts x 1 @ 2Ω OR 200 Watts x 2 + N/A @ 4Ω Bridged/Mono)

Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass

CX-Series Amplifiers are the perfect combination of big power, bigger flexibility and true reliability!

A variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want - to craft the sound you love.

Mono KICKER CX Amplifiers are now stable down to one Ohm, giving you the freedom to put even more subs in your system!

330 watts RMS x 14 ohms

preamp and speaker-level inputs

variable bass boost

The R2-250X1 full-range class-D mono amplifier (1.9" x 6.8" x 8.1") is packed with features and performance to deliver power and bass on demand with 250 Watts of RMS power

Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 150 Watts x 1 @ 4Ω OR 250 Watts x 1 @ 2Ω)

Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass

Ultra-fine mosfets circuit maximizing power efficiency while improving sound quality

LED power (Green) and protect (Red) indicators

Manufactured in China

Ultra-fine mosfets circuit maximizing power efficiency while improving sound quality

LED power (Green) and protect (Red) indicators

Manufactured in China

Competition Grade SPL Class D Monoblock MOSFET Car Power Amplifier

Peak Power at 1 Ohm: 2,900 Watts | RMS Power at 1 Ohm: 2,500 Watts

Stable at 1 Ohm, Frequency Response: 15Hz - 270Hz

The R2-1200X1 full-range class-D mono amplifier (1.9" x 6.8" x 11.3") is packed with features and performance to deliver power and bass on demand with 1200 Watts of RMS power

Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 400 Watts x 1 @ 4Ω OR 800 Watts x 1 @ 2Ω OR 1200 Watts x 1 @ 1Ω)

Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass

The BXX1200.1D is a 1200 watt mono amplifier featuring Super Class D technology with an NGSD digital chip to provide you with an extremely efficient, low temperature, high amplification system that others only dream about.

The rock solid Ultra-Fi MOSFET outputs are selected for both balance and output power. This keeps power smooth even during demanding peak in the music.

The amplifiers protection condition is also shown by blue illumination for normal operation and red for a short being present and requires the attention of an installer.

Marine Class D MOSFET Monoblock Power Amplifier

Peak Power at 1 Ohm: 1,200 Watts | RMS Power at 1 Ohm: 800 Watts

Fully Marinized with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case

Competition Grade Class A/B 4-Channel MOSFET Car Power Amplifier

Peak Power at 2 Ohms: 210 Watts x 4 Channels (14.4v)

RMS Power at 2 Ohms: 150 Watts x 4 Channels (14.4v)

In Line Fuse Included

Now With 16V Input Capability

1 Ohm Load Stable

Competition Grade SPL Class D Monoblock MOSFET Car Power Amplifier

Peak Power at 1 Ohm: 4, 700 Watts | RMS Power at 1 Ohm: 3, 500 Watts

Stable at 1 Ohm, Frequency Response: 15Hz - 270Hz

CX-Series Amplifiers are the perfect combination of big power, bigger flexibility and true reliability!

A variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want - to craft the sound you love.

Mono KICKER CX Amplifiers are now stable down to one Ohm, giving you the freedom to put even more subs in your system!

Class D Topology

Variable LPF

Selectable Bass Boost

CX-Series Amplifiers are the perfect combination of big power, bigger flexibility and true reliability!

A variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want - to craft the sound you love.

Mono KICKER CX Amplifiers are now stable down to one Ohm, giving you the freedom to put even more subs in your system!