Best Autolizer in 2026

120mm x 120mm x 25mm | Speed Up to 1500RPM (maximum RPM) | Noise (dBA)31 dBA | Airflow (CFM) 66.2 CFM

Seven fan blades and a sleeved bearing system for less vibration, noise and turbulence

High static pressure for efficient radiator or heatsink cooling

120mm x 120mm x 25mm | Up to 66.2 CFM (maximum RPM) | Noise (dBA)31 dBA | Airflow (CFM) 66.2 CFM

Seven fan blades and a sleeved bearing system for less vibration, noise and turbulence

High static pressure for efficient radiator or heatsink cooling

LED FESTOON BULB CHIPSET - Each LED bulb has 27 3014 super bright White SMD chip. It will allow you to light up entire dome map light with Autolizer 6418 bulb

Voltage: DC 12V, Flux:500 Lumens, Bright White 6000-6500K

For led dome map light , Map light, License plate light, trunk light, side marker, backup light, Side Door Courtesy, cargo light, Dome light etc.

LED FESTOON BULB CHIPSET - Each LED bulb has 18 3014 super bright White SMD chip. It will allow you to light up entire dome map light with Autolizer de3175 bulb

Voltage: DC 12V, Flux:400 Lumens, Bright White 6000-6500K

For led dome map light , Map light, License plate light, trunk light, side marker, backup light, Side Door Courtesy, cargo light, Dome light etc.

**BATTERY Powered** 100 LED with many color choices Christmas Wedding lights per strand | These LED lights are NOT connectable. | **Battery not included**, Require 3 AA batteries to operate.

Energy Saving: Low Power Consumption, Safe Design, Auto Shut-off after 6 hours | IP64 Waterproof Resistant (Waterproof Battery Box)

Length: 10 Meter / 32.8 feet | Length from plug to Controller: approx. 0.6M / 2ft

BEST IN CLASS - Premium Heavy Duty Dual Relay Xenon Conversion HID Harness with 50W 6OHM Resistors

ALL FITMENTS - Compatible with both 35W and 55W HID conversion kits | Compatible with all HID SINGLE BEAM bulbs H1, H3, H7, H8, H9, H10, H11, 9005, 9006, 5202, 880, 884

WATER & DUST PROOF - This is the ultimate in HID harness functionality. Built with 2 heavy duty waterproof relays and a waterproof fuse holder this harness can take the abuse of anything you threw at it. All wiring is protected by a durable mesh covering to protect against wear.

2 pcs HID Xenon bulbs H7 8000K Low Beam (Iceberg Blue)(1 pair) replacement light bulbs

High Quality High Volumn wholesaler

35W HID Xenon bulb

High performance cooling fan, 120x120x25 mm, 12V, 4-pin PWM, max. 1700 RPM, max. 25.1 dB(A), >150,000 h MTTF

Pressure-optimised blade design with outstanding quietness of operation: high static pressure and strong CFM for air-based CPU coolers, water cooling radiators or low-noise chassis ventilation

1700rpm 4-pin PWM version with excellent balance of performance and quietness, supports automatic motherboard speed control (powerful airflow when required, virtually silent at idle)

120 mm fan tuned for high-airflow and large volume cooling

Translucent, frosted fan blades and red LEDs for a dramatic effect

Nine ultra-thin fan blades, a sleeved bearing system for ultra low noise

Fan Size 120mm x 25mm

Noise (dBA) 25.2 dBA

Airflow (CFM) 52.19 CFM

16 independent RGB LEDs in every fan, split between two separate light loops. Airflow - 43.25 CFM. Noise level - 24.8 decibels

Software control and customize RGB lighting effects with the included Corsair lighting Node Pro or expand your RGB lighting with more Corsair RGB fans or RGB LED lighting strips (sold separately)

PWM fan control allows for dynamic speed adjustment between 600 rpm to 1, 500 rpm, minimizing noise or maximizing airflow

Triple fan kit with 4 lighting zones and 34 individually addressable RGB LEDs per fan radiate spellbinding colors and effects on either side for spectacular lighting regardless of whether they’re used for intake or exhaust

Brilliant white fan housing reflects light for brighter lighting and matches the clean refined look of other white CORSAIR products in your setup

Use the included compact iCUE Lighting Node CORE to easily control RGB lighting via CORSAIR iCUE software cutting down cable clutter with simple USB 2.0 and SATA connections

Magnetic Levitation Bearing: Dramatically reduces bearing friction by magnetically levitating the fan blade, producing lower noise and higher performance. Air flow - 55.4 CFM. Noise level - 20.4 decibels

Dynamic RGB Lighting: Four independent ultra-bright center-mounted RGB LEDs output a vivid blast of light and color

Control, Customize and Sync: The included CORSAIR Lighting Node PRO enables stunning dynamic lighting effects with other CORSAIR LINK supported devices

Magnetic Levitation Bearing: Dramatically reduces bearing friction by magnetically levitating the fan blade, producing lower noise and higher performance

Dynamic RGB Lighting: Four independent ultra-bright center-mounted RGB LEDs output a vivid blast of light and color

Expansion Kit: Product is intended as an expansion of the ML140 PRO RGB LED 2 fan kit with Lighting Node PRO. The RGB functionality of this product requires a RGB Lighting hub and Lighting Node PRO

Premium quiet fan, 120x120x25mm, 12V, 4-pin PWM, max. 2000 RPM, max. 22.6 dB(A), >150,000 h MTTF

Next-gen A-series design combines high airflow and high static pressure performance, ideal both as a case fan and for CPU coolers, watercooling radiators and AIO liquid cooling systems

State-of-the-art engineering (AAO frame, Flow Acceleration Channels, record tight 0.5mm tip clearance) and construction (Sterrox LCP material, metal-reinforced hub, metal bearing shell, etc.)

Magnetic Bearing: harnesses magnetic levitation technology to provide lower noise, higher performance, and a longer lifespan. Air flow - 97 CFM. Noise level - 35.0 decibels

Custom Rotor Design: delivers the perfect balance between high static pressure and high airflow, operating flawlessly in the most challenging environments

Extensive Control Range: A 1,600 RPM control range gives you total control between silence and absolute performance

Fan Size 140mm x 25mm

Noise (dBA) 25.5 dBA

Airflow (CFM) 66.4 CFM

Magnetic Bearing: harnesses magnetic levitation technology to provide lower noise, higher performance, and a longer lifespan. Air flow - 75 CFM. Noise level - 35.0 decibels

Custom Rotor Design: delivers the perfect balance between high static pressure and high airflow, operating flawlessly in the most challenging environments

Extensive Control Range: A 2,000 RPM control range gives you total control between silence and absolute performance

Premium quiet fan, 80x80x25 mm, 12V, 4-pin PWM, max. 2200 RPM, max. 17.7 dB(A), >150,000 h MTTF

Award-winning 80x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance

8cm format is ideal for compact PC cases (HTPC, ITX, Small Form Factor) and other chassis (intake & exhaust), replacement fan for NAS and other devices, etc.

Triple fan kit with four lighting Zones and 34 individually addressable RGB LEDs per fan radiate spellbinding colors and effects on either side

Use the included compact iCUE lighting Node Core to easily control RGB lighting via Corsair iCUE software cutting down the cable clutter with simple USB 2.0 and SATA connections

Create mesmerizing animated lighting effects with powerful Corsair iCUE software bringing your system to life with dynamic RGB lighting synchronized across all your icue-compatible products and immersive integrated lighting with compatible games

Nine airflow-optimized fan blades that reduce noise-generating turbulence. Air flow - 51.4 CFM. Noise level - 20.2 decibels

Long life Rifle Bearing gives an operating lifetime of 80, 000 hours

Even at maximum speed, operates at only 20.2Db(a)

Nine airflow-optimized fan blades that reduce noise-generating turbulence

Long life rifle bearing gives an operating lifetime of 80,000 hours

A fan speed of 2,000 rpm for extremely high air pressure

Nine airflow-optimized fan blades that reduce noise-generating turbulence

Long life rifle bearing gives an operating lifetime of 80, 000 hours

A fan speed of 1, 600 rpm for extremely high air pressure

Product type :ELECTRONIC COMPONENT FAN

Package dimensions :2.8 cm L x12.2 cm W x15.5 cm H

country of origin :China

Premium quiet fan, 80x80x25 mm, 12V, 3-pin Molex, 2000/1650/1200 RPM, max. 16.1 dB(A), >150,000 h MTTF

Award-winning 80x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance

8cm format is ideal for compact PC cases (HTPC, ITX, Small Form Factor) and other chassis (intake & exhaust), replacement fan for NAS and other devices, etc.

Premium quiet fan, 120x120x25 mm, 12V, 4-pin PWM, max. 1200 RPM, max. 17.8 dB(A), >150,000 h MTTF

Award-winning NF-S12A design has received more than 100 recommendations from international hardware websites and magazines

Outstanding airflow efficiency and superb acoustics: ideal for case cooling and other low impedance applications

A quiet fan system designed for cooling receivers, amplifiers, DVRs, and other AV components.

Protects components from overheating, performance issues, and shortened lifespans.

LCD thermostat programming with six speed controls, alarm alerts, failure triggers, and memory.

CORSAIR AirGuide Technology: Utilizes anti-vortex vanes to direct airflow and concentrate cooling, improving cooling whether used as intake, exhaust, or mounted to a liquid cooling radiator

Eight Individually Addressable RGB LEDs: Create mesmerizing RGB lighting with eight LEDs along each fan hub

ICUE Lighting Node CORE Included: Control RGB lighting for up to six CORSAIR RGB fans via CORSAIR iCUE software with this compact RGB Lighting Controller, cutting down cable clutter

High performance cooling fan, 140x140x25 mm, 12V, 4-pin PWM, max. 1500 RPM, max. 25.8 dB(A), >150,000 h MTTF

Highly optimised low-noise design provides outstanding quietness of operation, excellent static pressure and strong airflow (CFM), square frame for water cooling radiators and chassis ventilation

1500rpm 4-pin PWM version with excellent balance of performance and quietness, supports automatic motherboard speed control (powerful airflow when required, virtually silent at idle)

Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors.

Dynamic temperature and humidity programming, with timers, grow cycles, scheduling, minimum speed.

Connect with our app via Bluetooth to access advance programs, alarms, notifications, and view climate data.