Best Bansbach Easylift in 2026

PREMIUM GRADE GAS SPRINGS: Made of medical grade 316L stainless steel, our extended length gas springs are built to last and are corrosion and water resistant, and can be installed and stored in any position

SHOCK ABSORBANT: Protection against vibration and light side forces; Minimal friction for the production of lowest extension forces and low breakaway forces

ADJUSTABLE PRESSURE: Each gas spring features a valve inside the cylinder, and pressure can be adjusted by using the depressurizing screw

AN ALL IN ONE KIT: Our Bansbach Easylift Gas Spring Kit includes ball sockets and brackets for tonneau covers, hatches, lid support, and other projects

HEAVY DUTY AND ULTRA SHOCK ABSORBANT: Our gas springs offer protection against unwanted vibration and light side forces with minimal friction for smooth movement

BUILT TO LAST: Precision crafted from durable materials, our powder coated cylinders and CeramPro piston rods make our professional grade gas springs resistant to corrosion caused by rust, water, heat, and moisture

AN ALL IN ONE KIT: Our Bansbach Easylift Gas Spring Kit includes hinge eye connectors for tonneau covers, hatches, lid support, and other projects

HEAVY DUTY AND ULTRA SHOCK ABSORBANT: Our gas springs offer protection against unwanted vibration and light side forces with minimal friction for smooth movement

BUILT TO LAST: Precision crafted from durable materials, our powder coated cylinders and CeramPro piston rods make our professional grade gas springs resistant to corrosion caused by rust, water, heat, and moisture

✅ 13" 30lbs Gas Lift Supports Struts -- 2 shocks each set; most SUITABLE support weight: 22-33 Pounds for 2 SHOCKS, not 1; Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!

✅ 13" 30 Pound Gas Spring Shocks -- Interchange Part Number: 711498,C1604464,C16-04464,C1604464A,C16-04464A,C1621703,C16-21703,CS1300-30,SE130P30

✅ 13 inch 30 lbs Gas Props -- C16-04464 gas struts could be used on canopy door, pickup topper camper shell window, leer shell glass, leer topper, truck toolbox, etc.;

✅ Interchange Number: C16-06389, C1606389;

✅ 14 inch 24Lb Gas Struts -- Extended Length (Center-to-Center): 14" (356 mm; Compressed Length (Center-to-Center): 8.8" (224 mm); Force: 24 Lbs (107 N) Per Strut, 2 Struts per set, not 1;

✅ C16-06389 14 inch Gas Spring -- ARANA C1606389 struts could be used as the replacement parts for pickup canopy, truck cap, leer topper, camper shell rear window, toolbox lid, etc.

1 Pcs 2007-2021 Tundra fuel door spring (2022/01/15 Updated with corrosion protection coating)

Your tundra gas cap housing has been loosened because of a failed gas door spring. There is no need to replace the whole housing. Just replace the broken spring

Fits: 2007-2021 Tundra gas door spring (The spring was soaked and oiled WD40 to prevent rust)

【PRODUCT FEATURE】Help small and light projects to open the lid or door slowly and softly, and keep it up. The package arrives with 2 shocks, 4 mount brackets, and 10 screws.

【PRODUCT PARAMETER】Extended Length: 7.50 Inches. Compressed Length: 5.34 Inches. Each Shock Force: 111N = 25 Lbs.

【PLACEMENT】Usually used for projects with small and light LIDS or doors. Such as wall cabinets, camper cabinets, storage boxes, toolbox, toy boxes, etc.

✅ ARANA 27" GAS SHOCKS are compatible with the following OEM Numbers: 190725,IH1214GS,ML2645,ML26-45,ML-26-45,RSIH1212GS,SL2645,SL26-45,SL-2645,SL-26-45,SL26451,SL26-45-1,SL-26451,SL-26-45-1,SL26455,SL26-45-5,SL-26455,SL-26-45-5,st270ed1-45,ST270EDi45,ST270EDi-45,ST270EDI45,ST270EDI-45,ST270P45EZ10,ST270PU45,ST270PU-45;

✅ ARANA 27 inch 45 Pound GAS STRUTS could be used as the replacement parts of the tonneau cover undercover bedcover for Pickup Truck, easy to install without any special tools required;Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!

✅ ARANA 27" 45lb GAS LIFT SUPPORTS extended Length from Center Mount to Center Mount is 27 inch, 10mm Nylon End, please measure your old struts at first before purchasing;NOTE: If the lid weight is less than 35lbs or more than 50 pounds, please choose other pressure struts!!!

[GAS SPRING PARAMETER]: Force: 100Lbs/445N 20” per Strut, a pair of 2 shocks. Extended Length: 19.7”(500mm), Compressed Length: 11.8”(300mm). Ball Joint Diameter: 10mm. ⚡⚡Very Strong! Can not compress directly by your hands.

[C1608054 GAS STRUTS]: Package include Struts* 2 with Ball Studs*4, Installation Guide* 1. Ball Joint Diameter:10mm Nylon Ball Sockets(No Bracket included). Most suitable lid is in 75-110Lbs. A variety of colors are available for you to choose.🌴🌴

[100LBs GAS STRUTS]: Suitable for RV Queen Bed, Tonneau cover, Camper Shell Rear Window, Floor Hatch, Outdoor Large Bench, Tool Box and so on. Your DIY can create more possibilities for Gas Shocks, looking forward to your DIY creations! 🌴🌴

✅26" 87 pound gas struts - Compatible with the following OEM Numbers: C1613334

✅26 inch struts for heavy lids - ARANA 26 inch spring shocks will be suitable for heavy lids, with lid weight between 70-96 lbs, side length ≥ 39 inch; Note: do measure the lid weight or check the oem number to buy correct items;

✅26 inch gas struts - ARANA 26" gas struts are widely used on your pickup truck bed cover, tonneau cover, leer truck hard cover topper those need long-size replacement struts, as long as the lid weight is between 70-96 pounds;

Study & Heavy Duty: Certified by SGS test (USA) & Higher Standard LGA test (GER), use of high quality materials and thickened outer steel, this gas lift cylinder is of really high quality and durability, weight capacity: 450 lbs.

Universal size: 10 stroke cylinder piston tube,the lowest height is 17.7", the highest height is 27.7", which means this hydraulic lift has a height range of 10 inches.

Longer service life:These high standard office chair cylinder are more reliable and you get a free replacement for any non-human quality problem within 5 years.

Heavy-duty: This gas lift cylinder is made of thicker alloy steel, engraved with the mark of SGS inspection, the quality is reliable. (Weight capacity: 400 lbs)

Adjustable height: The height of the gas lift cylinder fully compressed is: 14 ", and the height fully expanded is: 22". This means that it has an 8-inch adjustable height that allows you to rise higher and use your office chair in more scenarios.

Universal size: This 8" Long Stroke Gas Lift suitable for most executive office chairs, task chair, office chair, rolling stool, drafting stool.( Please measure dimensions before you purchase it )

PACKAGE CONTENT: 2 Pieces Gas Spring with Brackets and Installation Screws.

MAXIMUM LOAD CAPACITY: 100N/22Lbs, MAXIMUM OPENING ANGLE: 90 - 100 Degree.

MATERIAL: Made for the shaft, durable and practical. COLOR: Metallic Gray.

Nitrate gas spring

Length: 7.5" (compressed) to 5.5" (extended)

Rod Diameter: 6mm

PREMIUM GRADE GAS SPRINGS: Made of medical grade 316L stainless steel, our extended length gas springs are built to last and are corrosion and water resistant, and can be installed and stored in any position

SHOCK ABSORBANT: Protection against vibration and light side forces; Minimal friction for the production of lowest extension forces and low breakaway forces

ADJUSTABLE PRESSURE: Each gas spring features a valve inside the cylinder, and pressure can be adjusted by using the depressurizing screw

Stainless steel gas spring

Length: 9.5" (compressed) to 15" (extended)

Rod Diameter: 6mm

Stainless steel construction

Length: 9.5" to 15"

P1 Force: 60 lbs.

Stainless steel gas spring

Length: 10.25" (compressed) to 17" (extended)

Rod Diameter: 6mm

PREMIUM GRADE GAS SPRINGS: Made from heavy duty materials, our gas springs are built to last and can be installed and stored in any position

SHOCK ABSORBENT: Our gas springs offer protection against vibration and light side forces with minimal friction for smooth movement

BUILT TO LAST: Our powder coated cylinders and CeramPro piston rods make our professional grade gas springs resistant to corrosion

Stainless steel construction

Length: 10.25" to 17"

P1 Force: 40 lbs.

Stainless steel construction

Length: 12" to 20"

P1 Force: 60 lbs.

PROFESSIONAL GRADE LOCKING GAS SPRINGS: Made from heavy duty steel, our gas springs feature controlled pushing, lifting, and adjusting with the ability to rigidly lock in both directions to ensure zero movement

HIGHLY SHOCK ABSORBANT: Our locking gas springs offer protection against vibration and light side forces with minimal friction for smooth movement and feature an integrated grease chamber

ULTRA STRONG STEEL CONSTRUCTION: Precision crafted from heavy duty steel, our premium grade locking springs feature powder coated cylinders and CeramPro treated piston rod surfaces and are resistant to corrosion

Stainless steel gas spring

Length: 5.5" (compressed) to 7.5" (extended)

Rod Diameter: 6mm

AN ALL IN ONE KIT: Our Bansbach Easylift Gas Spring Kit includes ball sockets and brackets for tonneau covers, hatches, lid support, and other projects

HEAVY DUTY AND ULTRA SHOCK ABSORBANT: Our gas springs offer protection against unwanted vibration and light side forces with minimal friction for smooth movement

BUILT TO LAST: Precision crafted from durable materials, our powder coated cylinders and CeramPro piston rods make our professional grade gas springs resistant to corrosion caused by rust, water, heat, and moisture

PREMIUM GRADE GAS SPRINGS: Made from heavy duty materials, our gas springs are built to last and can be installed and stored in any position

SHOCK ABSORBENT: Our gas springs offer protection against vibration and light side forces with minimal friction for smooth movement

BUILT TO LAST: Our powder coated cylinders and CeramPro piston rods make our professional grade gas springs resistant to corrosion

AN ALL IN ONE KIT: Our Bansbach Easylift Gas Spring Kit includes hinge eye connectors for tonneau covers, hatches, lid support, and other projects

HEAVY DUTY AND ULTRA SHOCK ABSORBANT: Our gas springs offer protection against unwanted vibration and light side forces with minimal friction for smooth movement

BUILT TO LAST: Precision crafted from durable materials, our powder coated cylinders and CeramPro piston rods make our professional grade gas springs resistant to corrosion caused by rust, water, heat, and moisture

Damper Gas Spring

Stroke: 50mm

Damping: Compression Only

PROFESSIONAL GRADE LOCKING GAS SPRINGS: Made from heavy duty steel, our gas springs feature controlled pushing, lifting, and adjusting with the ability to rigidly lock in both directions to ensure zero movement

HIGHLY SHOCK ABSORBANT: Our locking gas springs offer protection against vibration and light side forces with minimal friction for smooth movement and feature an integrated grease chamber

ULTRA STRONG STEEL CONSTRUCTION: Precision crafted from heavy duty steel, our premium grade locking springs feature powder coated cylinders and CeramPro treated piston rod surfaces and are resistant to corrosion