Best Bbk Perf in 2026

Manufactured from brand new CNC machined 356 Aluminum Housing

Fitted with the highest quality components and brand NEW Factory OEM Electronic throttle controls

Installation a true bolt on with no modifications

[Size] ID of 6an fuel hose:0.34"(8.63mm),OD:0.54"(13.71mm).Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F (-40°C to 125°C);Min bending radius:63.5mm.

[Application] 6AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel,etc.

Light-weight and high flow racing performance design. Typical use like : inline air cooling, cool air intake and re-direction, enhancing filter flow rate, improving throttle response and engine performance, reducing engine stalling, improving poor Engine starting

Silicone-Impregnated Fiberglass structure for high temperature application

Steel Wire Reinforced structure enables hose flexibility and durability

Light-weight and high flow racing performance design. Typical use like : inline air cooling, cool air intake and re-direction, enhancing filter flow rate, improving throttle response and engine performance, reducing engine stalling, improving poor Engine starting

Silicone-Impregnated Fiberglass structure for high temperature application

Steel Wire Reinforced structure enables hose flexibility and durability

Light-weight and high flow racing performance design. Typical use like : inline air cooling, cool air intake and re-direction, enhancing filter flow rate, improving throttle response and engine performance, reducing engine stalling, improving poor Engine starting

Silicone-Impregnated Fiberglass structure for high temperature application

Steel Wire Reinforced structure enables hose flexibility and durability

[PREMIUM PERFORMANCE] - All Bosch Fuel Pressure Sensors provide very reliable and accurate measurements and feature extremely fast response times to ensure your vehicle runs as intended

[LONGER LIFE] - Sensors feature built-in circuit protection to ensure your electronics and computer systems stay unharmed

[PROVEN RELIABILITY] - High reliability of pressure sensing proven in both gasoline and diesel direct injection systems

[PREMIUM PERFORMANCE] - Bosch Original Equipment Crankshaft Position Sensors provide accurate detection of engine speed - engine speed is the main control variable for ignition timing

[ACTUAL OE] - Bosch Original Equipment Crankshaft Position Sensors aren't just a quality replacement component, they're the same sensor your vehicle was equipped with when manufactured - minus the expense of brand name packaging

[SUPERIOR ENGINEERING] - Robust design features precise digital measurement of rotational speeds, high resistance against external interference, and a wide temperature range that withstands extreme hot and cold operating conditions

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

Direct replacement - this diesel injection control pressure harness is designed to match the fit and function of the original harness on specified applications

Ideal solution - this harness is a reliable replacement for an original harness that is missing, failed or damaged due to corrosion

Durable construction - this part is made from quality materials to ensure reliable performance and a long service life

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

[PREMIUM PERFORMANCE] - Bosch Original Equipment Camshaft Position Sensors accurately determine engine position based on the location of the camshaft - engine position is used for determining fuel injection and ignition sequence

[ACTUAL OE] - Bosch Original Equipment Camshaft Position Sensors aren't just a quality replacement component, they're the same sensor your vehicle was equipped with when manufactured - minus the expense of brand name packaging

[SUPERIOR ENGINEERING] - Robust design features twist insensitive mounting (TIM) for ease of installation, reliable digital measurement, and a wide temperature range that withstands extreme hot and cold operating conditions

[INNOVATIVE TECHNOLOGY] - Every Bosch Oxygen Sensor benefits from the technological and manufacturing experience gained from decades of production since first inventing the Oxygen Sensor in the late 1960's, ensuring long-lasting, superior performance

[FACTORY TESTED] - Seared appearance of protection tube is a result of a 100 percent fully functional quality test to ensure every Bosch manufactured sensor meets Bosch's rigorous standards for quality and performance

[STAINLESS STEEL BODY] - Exclusive double laser-welded stainless steel body is totally submersible and sealed tight to protect against damage from exhaust emissions — ensuring longer sensor service life

Single Quantity

No Core Charge Req.

Weight: 0.28lbs

[INDUSTRY LEADER] - As an original equipment global leader in mass air flow technology, all Bosch Mass Air Flow (MAF) sensors ensure low levels of harmful emissions with greater fuel efficiency and improved engine performance

[OPTIMAL PERFORMANCE] - OE technology provides the correct function and calibration to ensure trouble-free operation and emission compliance while providing up to 20 percent better fuel consumption

[READY TO INSTALL] - 100% new, not remanufactured, sensor and housing are calibrated and sold together, ensuring precise sensor reading and optimal engine performance

Country Of Origin : China

The Package Height Of The Product Is 3.37 Inches

The Package Length Of The Product Is 2.0 Inches

Country Of Origin : United States

The Package Height Of The Product Is 4.25 Inches

The Package Length Of The Product Is 1.38 Inches

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

[INDUSTRY LEADER] - As an original equipment global leader in mass air flow technology, all Bosch Mass Air Flow (MAF) sensors ensure low levels of harmful emissions with greater fuel efficiency and improved engine performance

[OPTIMAL PERFORMANCE] - OE technology provides the correct function and calibration to ensure trouble-free operation and emission compliance while providing up to 20 percent better fuel consumption

[READY TO INSTALL] - 100% new, not remanufactured, sensor and housing are calibrated and sold together, ensuring precise sensor reading and optimal engine performance

NOTES - ONLY fits models with 4.0L / 2.5L engines. ONLY fits 4-bolt throttle bodies.

Compatible with Most Jeep Wrangler TJ YJ 1987-2006, Cherokee XJ 1984-2001

KIT CONTENTS - Throttle Body Spacer; Gaskets; Linkage Spacers; Hardware

{Compatible Models} Replacement for GMC C4500 C5500 Topkick, Savana 2500 3500 4500 Base, Sierra 2500 HD 3500 HD; Replacement for GMC Sierra 2500 3500 Classic; Replacement for Chevy C4500 C5500 Kodiak, Express 2500 3500 4500 Base, Silverado 2500 HD 3500 HD 2500 3500 Classic

{Part Number} 763527-0512, 904-235, 98011739, 98061570, 12643471, 12635324

{Premium Quality} Independent product design, core chip independent design and production, optimize engine performance,determine the ignition time and fuel injection time, ensure the safety and stability of the car

Helps prevent excess air form entering the intake

Helps seal the intake and throttle from the elements

Some GM Genuine Parts may have formerly appeared as Adecco GM Original Equipment (OE)

New Original Orignial Equipment Part

Restores original drivability characteristics

Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering

Perfect Replacement: Our OEM Fuel Injector is designed as a direct replacement for the Ford 5.4 L V8 engines found in various models, including the 2005-2006 Expedition, 2005-2007 F-250 Super Duty, 2005-2007 F-350 Super Duty, 2005-2007 F-150, 2005-2007 Lincoln Navigator, and 2006-2007 Lincoln Mark LT.

Optimal Engine Performance: This replacement fuel injector promotes smooth engine operation, ensuring optimal gas efficiency and reducing harmful emissions caused by worn injectors. Enjoy enhanced power and fuel economy with our high-quality fuel injector.

Corrosion-Resistant Design: The stainless steel slide and spring assembly of our fuel injector prevent corrosion and build-up, resulting in a longer service life for your fuel injection system. Experience reliable performance and durability with our corrosion-resistant design.

[Application] Fuel regulator fit for most vehicle's EFI system.

[Medium] efi fuel pressure regulator compatible with gasoline,E85 and alcohol.

[Adjustable Range] 20 -120PSI. (The adjustment range of the original included spring is 20-75psi. By replacing the top internal spring, the pressure range of 75-120psi can be reached.)

Fit for engine: LS Style 4 bolt intake manifold (eg LS2, LS3, LS7, LSX) with cable drive only.

92mm Intake Throttle Body, LS 4 bolt throttle body for GM Gen III Ls1 Ls2 Ls3 Ls6 Ls7 Sx Ls 4 CNC.

Replacement for GM-recommended replacement part for your GM vehicle’s original factory component.

Replacement Injection Control Pressure Sensor - The ICP sensor or Injection control pressure sensor is found on 's Powerstroke 7.3 L diesel engines. The ICP sensor is responsible for monitoring oil pressure being passed on to the PCM to pressurized fuel injectors using the IPR (Injection Pressure Regulator) for proper vehicle operation.

Compatible Replacement for Ford Vehicles With 7.3L Powerstroke Engines - 2003 E-350 Club Wagon | 1995 - 1998 E-350 Econoline | 1995 - 2002 E-350 Econoline Club Wagon | 2000 - 2003 Excursion | 1994 - 1996 F-250 | 1999 - 2003 F-250 Super Duty | 1994 - 1997 F-350 | 1999 - 2003 F-350 Super Duty |. The ICP sensor can easily be located inside the engine bay behind the alternator.

Replaces Part# 1807329C92, ICP102, F4TZ-9F838-A, F6TZ-9F838-A, CM5227. This ICP sensor found on 's 7.3L Powerstroke engines are popular for having oil leaks. If you are experiencing oil coming out of the ICP Sensor's electrical connector, weird noises on idle during first starts, hesitation or misfires then you may have a problem with your ICP sensor.

Genuine AC Delco Pressure Sensor

Part number: 12247409

Fit type: Vehicle Specific

➤ Hooke Road 3.8L V6 Engine Throttle Body Spacer fits for 2007 2008 2009 2010 2011 Wrangler JK 3.8L Models

➤ Large bore design; Cooler and denser air flow optimizes power and performance

➤ Throttle Body Spacer:1/2"" inch thick; Moves throttle body 1/2” away from the intake manifold

Replacement Part Number: S20008, 2172422, 217-2422, 12580760, 12572658, ETB0024, 12679524

Compatible with Buiick and Cadillac vehicle models: 2006 - 2007 Rainier 5.3L / 2007 - 2008 Escalade, ESV, EXT

Compatible with Chevrolet vehicle models: 2007 - 2008 Avalanche / 2008 Express 1500 5.3L / 2008 Express 2500, 3500 4.8L, 6.0L / 2007 - 2008 Silverado 1500, 4.8L, 5.3L, 6.0L / 2007 - 2008 Silverado 2500 HD, 3500 HD 6.0L

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function. Helps provide air flow for proper fuel/air mixture