Best Bczamd in 2026

This toothbrush is made of copper wire and is specially designed for cleaning the hot bed of 3D printer nozzles.

To clean the nozzle, heat the nozzle to 190°C.

Note: The copper wire toothbrush may be deformed during transport, but this will not affect its use. This is a handy tool.

Y axis Belt tensioner: Upgrade parts for Ender 3 pro, not fit for ender 3, ender 3 v2, ender 3 s1.

Material: aluminum alloy; Surface Treatment: anodizing

Comes spare kits, need to install it by yourself, it is easy.

These are fixed bed brackets for the CR-10, Ender 3. They should replace the springs under the heating bed. Two firmware are required.

The new Ender 3 contains the spacers so you don't have to print the required parts. You only need to adjust the height of the limit switch module. If your printer is a CR-10 or Ender 3 old part, you need to print the required parts, reference files in thingiverse, keywords: CR-10 Solid Bed Mount.

The model is 3 high (18 mm) and 1 short (16 mm), black. (Print firmware not included). Please note: Before installation, you need to print two firmware (search for "3742788" in Thingiverse). An automatic level sensor is required. Please refer to the picture.

2019 New Upgrade for 3D Printer Print Bed, Compatible with Prus MK2.5S, MK3/3S

Size: about 10 x 9.4 inch

Double-sided PEI powder-coated plate made of hardened flexible steel, does not deform

This thermal plaster has high thermal conductivity, low leakage and high temperature stability.

It is suitable for 3D printer heat sinks, CUPs, LEDs, ICs, GPU chipsets, PC heat sinks and all electronic components that require direct bonding.

Thermal adhesives have thermal properties, adhere to most metals and non-metals, are odorless, non-toxic, moisture resistant, non-swelling and non-corrosive to the substrate.

This thermistor head is designed for the Prus i3 MK2S/MK3 3D printer.

Wire length:1m/39.37 inches, the connector is 2pin XH2.54.

Temperature sensor 100KΩ Accuracy ± 1%，NTC 3950 100K thermistor is able to measure the temperature.

Compatible with: gt2 timing belt fit for ender 3d printer.

Material: The timing belt is made of premium rubber with glass fiber core, durable and more flexible.

Dimensions: Length 616mm/ 24.2inch, width 0.23"/6mm, thickness 1.5mm, spacing 2mm, suitable for many occasions.

GLOW MULTICOLOR CHANGE - Every 10 Meters color change with Green,Blue,Purple and Pink. Exposure to the strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect, then glow blue filament, glow deep blue purple filament, shiny glow green filament, glow red filament, glow pink filament

UPGRADE GLOW FILAMENT - AMOLEN Specializes in researching Glow in the Dark Filament, using the most advanced Glow materials, PLA raw materials come from USA. All the glow filaments on the market are a bit brittle, please print with patience and keep the angle smooth when feeding

HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm

3D printer filament (1.75mm diameter, red; 1 kg spool); designed to fit most common 3D printers (check spool size for compatibility)

Made of PLA, a commonly used thermoplastic material known for its lower melting temperature and ease of use (no heated bed required), plus it’s low-warp, odorless, and offers a glossy-type finish

Engineered to reduce jamming

Newest Upgraded and More Convenient: Newest Wash and Cure machine added lens to UV lamp beads, the light source intensity distribution is more uniform, and the surface of the model is smoother. With the 360° automatic rotating curing table and added bottom reflector, the bottom curing has no dead ends, so that the entire model is cured more thoroughly

2-In-1 Wash and Cure Station: Dual functions of cleaning and curing can not only remove most of the chemicals, settle scrubbing and mess issues, but also seriously streamline the whole post-processing. It's a professional solution to the messy clean up job of your fabulous prints and also helps reduce the clutter on your desk. 1-60min time adjustable, customize knob cleaning and curing time. Each layer of the 3D printer model can be better cleaned and cured according to your DIY needs

Widely Compatibility: The ANYCUBIC wash and cure machine is a great addition to most type of regular resin printer, Compatible with most LCD/DLP/SLA 3D printers such as QIDI Shadow, NOVA, Mars series and other regular resin printers with similar build volume size as it does for photon series, this Wash & Cure machine has opened up a whole new world of 3d printing for you and greatly enhance your workflow

Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.

Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.

Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.

Compatible with ELEGOO Mars 3 and Mars 3 Pro Resin 3D printer.

Film dimensions: 146*195mm, Film thickness: 0.127mm. Note:Please remove the double-sided protective film before use.

Compared with FEP release film, PFA release liner film has higher temperature resistance and printing success rate, and less release tension for easier to remove models.

GREAT VALUE: sharp quality tweezers and 10pcs of 0.40mm nozzle cleaning needles packed in one safe container!

Anti-Static, Non-Magnetic CURVED PRECISION TWEEZERS; 3D printing tweezers great for nozzle maintenance and cleaning excess support material

10 pcs of 0.40mm diameter FLEXIBLE stainless steel needles; Ideal for gentle maintenance of your nozzles and hard to reach places like the feed gears

Durable, rigid construction; Solid rivets keep the blades in place, no more repurposed artist palette spatulas with spinning, twisting and turning cramp rings!

Long knife with a beveled front edge; Slides very gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying

Stiff, hardened stainless steel blades; Flexible but not too thin or flimsy, safer rounded edges, work well with different size objects without damaging them

Premium Quality--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.

Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.

Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

Constant Temperature: Keep a constant temperature printing environment, reducing the bad impact to printed models when low-temperature weather, improving printing stability.

Fit for Ender 3/Ender 3 Pro/Ender 3S / Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo /Ender 3 Max/CR-6 SE/CR 20/CR 20 Pro.

Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well.

Wire Length: 45.27-46.85inch /1.15-1.19m. Package includes 5 thermistors.

Note: Not fit for Ender 3 V2/Ender 3 MAX/Ender-3 Max Neo/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3d printer's thermistor and confirm whether this thermistor is compatible with yours before buying.

Used for heated bed or hot end.

Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.4 mm, out thread M6, Thread length 4mm; a set of 25pcs printer nozzles and 5 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle.

Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

Precision Process: Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs. Due to all of above, not only reduce the resistance, avoid filament getting stuck on nozzle, but also effectively guarantee the service life of the nozzle, make out of filament more smoother.

The UV LED lamp uses 6 high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured efficiently, using less time than usual. NOTE: It can't be used to cure liquid resin directly and can't cure filament prints.

The 360° rotating solar turntable use power from UV lighting /nature solar Power/fluorescent lighting, can't use batteries for power.Maximum display /rotate weighing less than 500g/1.1Pound which is also suggested size that the light can cure. TIPS: Close to light will help to speed up and rotate heavier.

The resin can be cured in 10-15 seconds from a distance of 5 cm from the light. NOTICE: thicker parts require more time to cure. What's more the dimension of the UV light is 3.35*4.53*3.74" and the turntable diameter is 3.5".

Parameter: 25pcs MK8 Brass nozzles, Input diameter 2.00mm, output diameter 0.4mm, screw thread: M6, hexagon diameter: 6 mm.

Applicability and Compatibility: MK8 extruder nozzles fit for 3D Printer Creality ender 3 ender 3 pro ender 5 cr-10 and so on, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

Professional: We always put the quality of our products first! High quality brass and rigorous workmanship give you a smooth and high resolution 3D printing experience.

Parameter--Input diameter: 1.75mm, Output Diameter: 0.8mm, Out thread: M6.

Premium Quality--The 3D printer nozzles are made of high quality brass material, sturdy and durable, brass can be used to print PLA, ABS and most any other non-abrasive materials.

Premium Characteristics--MK8 Nozzle through long-term testing to solve the problem of plugging and missing materials to the greatest extent, low thermal conductivity, resistant to corrosion, high abrasion resistance.

100% Creality Original--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.

Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.

Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

Very easy to take off the models, NO tools to remove models

Use clips to fix the glass plate on the hot bed.

Higher temperature higher sticky. The models will stick on bed firmly when temperature is high

Easy to Remove Model within 1 Minute: The coating of the microporous composite material has a microporous structure. The filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily.

High Viscosity and Strong Adhesion: Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.

0.15MM of Flatness Recovery Model: This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness.

【300°High-temp Nozzle】Upgraded brass nozzle can stand up to 300°printing temperature and it is compatible with multiple filaments such as PLA, ABS, PVA, Wood, TPU, PRTG and PA which providing more possibilities for creation.

【Sprite Dual-Gear Direct Drive Extruder】Compatible with more filaments, Ender 3 S1 Pro 3d printer can print PLA, TPU, PETG, ABS.etc. It is more lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU.

【4.3 inch Touch Screen】The 4.3-inch touch screen supporting 9 languages, offers efficient UI interaction and is easy to use. It will dim out automatically for energy-saving if there is no action for 3 minutes.

THERMAL DYNAMIC COATING - Based on science, works like magic; Parts stick at hot and release when cooled; Dries fast and non tacky so it won't clog your nozzle with goo

LONG LASTING - Print several times on a single coating; recharge with a wet sponge to get more prints out of a single application; Cost pennies per print

LOW ODOR & WATER SOLUBLE - No harsh smells; No headaches; Easy to touch up or remove with water

Sufficient content: this package contains 15 pieces extruder wheels in a pack, sufficient quantity to satisfy your various demands and replacements

Check the dimension: each 36 teeth gear measures approx. 11 x 11 mm/ 0.43 x 0.43 inch (L x W), its inner diameter is approx. 5 mm/ 0.2 inch, 36 teeth, fit for most standard 3D printers; Please check whether the size is suitable for your needs before purchasing

Practical function: our 3D printer parts can replace your broken one and make your printer work more efficiently, improve the performance and reliability for your 3D printers

42-40 motor for the e-axis of the printer of the Creality Ender series and the CR series, like Ender3 / 3pro / 5 / 5pro / 5plus; CR10 / 10MINI / 10SProV2 / 10S4 / 10S5 / 10MAX / 10V2 / 10V3; The motor 42-40 also fits the Y-axis of Ender5 / 5pro / CR-10V2 / CR-10SProV2.

1.8 degree step angle, 0.4 N.M holding torque, with 0.8 A rated current per phase.

Shaft diameter: 5mm （D-shape）

American Made. We strive to offer the highest quality product for the lowest possible price. Your satisfaction is our #1 priority! Keep your resin 3D printer free of dust, UV rays and moisture, with more pliable material! Flaps on all four sides allow easy access to printer controls and ports. Our elite resin 3D printer blackout cover protects from damage and helps contain stray resin fumes. Also acts as a thermal insulator. Click on our store link above for bundle deals!

USER-FRIENDLY & VERSATILE - Slipping our cover on is fast and effortless on your resin 3D printer or wash and cure machine. Flaps on all four sides allow easy access to printer controls and ports.

CLEAN UP ON YOUR OWN TIME - Now you're no longer forced to tidy up your printer right after a project. Use our elite 3D printer blackout cover to keep the device secure until you have time for cleaning.