Best Besiy in 2026

PACK - Skate T-Type Tools x 1 & Skate Y-Type Tools x 1

TOOLS - Includes 3/8", 1/2", 9/16" sockets & A Slide-out Phillips Head Wrench Screwdriver

HIGHEST QUALITY - 45# steel,extremely strong and durable.

Suitable for longboard skateboard.

Made of steel and durable.

Package : 16 Pcs nuts and bolts.

Size: 31inch x 8inch

Concave Shape: Max load Capacity 360 lbs

High Quality 7-Ply Maple Blank Skateboard Deck, Good for replacement

Skateboard Parts Kit: skateboard wheels 52mm with installed bearings; Skateboard Trucks 129mm(5 inches); All-in-One Skate Tools; Skateboard screws 1";

The 608 abec-7 bearing is 22*8*7, which have been installed on wheels. The premium wheels with high quality bearings help you do street tricks very well. It’s also favored by most freestyle skaters because of their light weight.

129mm Trucks: skateboard trucks 129mm(5 inches) are suitable for 7.5-8 inches decks. We are offered a selection of 129mm trucks and four-hole skateboard riser pads and baseplates. They get higher quality and professional than six-hole skateboard riser pads and baseplates.

Rubber Riser Pad Shock Pads Set for Skateboards & Longboards.

2 Sizes: 3mm 1/8”, 6mm 1/4” Dual Bolt holes for sizing options

Package Includes: 2 x Skateboard Riser Shock Pads

Size: 9inch x 33inch (23cm x 84cm).

Material: The skateboard grip tape was made of high quality timeproof exclusive OS780 diamond silicon grit binding process for grip that will not wear out, super sticky adhesive that won't peel in extreme heat or cold.

Bubble Free: Grip tape is specially perforated to prevent bubbles ,hundreds of barely-visible perforations that allow air to escape when applied to your board.

Package includes: you will receive 30 pieces rolling bearings, black double rubber sealed deep groove, enough quantity to meet your daily requirements for usage and replacement

High Speed Precision Bearings - Made of high quality lube and material for ultra smooth and long lasting performance, which is harder and tougher than carbon steel. These bearings meet interational ABEC 11 standard, high speed, high precision and low friction.

Size production: the inner diameter of the skateboard bearings is about 0.32 inch/ 8 mm, the outer diameter is about 0.87 inch/ 22 mm, and the width is about 0.28inch/ 7 mm, proper size is suitable for most mechanical products

SKATEBOARD PARTS SET: It inclouds skateboard trucks 5.0, skateboard wheels 52mm, skateboard bearings ABEC-11, skateboard screws 1", skateboard spacer.

7.5-inch Skateboard truck, Magnesium aluminum alloy casting, die-casting process, medium carbon steel hardening, metal baking finish, can withstand more weight and pressure.

100a hardness 60% rebound is suitable for beginners, hardness is too high, easy to slip, PU infusion integrated molding, do not worry about wheel cracking.

[Multi-functional Tool]: A multi functional skateboard T tool that allows you to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck; which is perfect for completing skateboard assembly

[All-in-One Design]: The all in one skate tool has everything you need to tighten up or repair your skateboard. This skate tool works with all types of the skateboards,penny board and long boards, it can help change wheels, clean your bearing

[Anti-Loss Structure]: The skateboard T tool includes 3 different sizes of sockets(3/8", 1/2", 9/16") and a slide-out Phillips head wrench screwdriver that fits into the top of the handle when not in use

[Multi-functional Tool]: A multi functional skateboard T tool that allows you to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck; which is perfect for completing skateboard assembly

[All-in-One Design]: The all in one skate tool has everything you need to tighten up or repair your skateboard. This skate tool works with all types of the skateboards, penny board and long boards, it can help change wheels, clean your bearing

[Anti-Loss Structure]: The skateboard T tool includes 3 different sizes of sockets (3/8", 1/2", 9/16") and a slide-out Phillips head wrench screwdriver that fits into the top of the handle when not in use

[Multi-functional Tool]: A multi functional skateboard T tool that allows you to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck; which is perfect for completing skateboard assembly

[All-in-One Design]: The all in one skate tool has everything you need to tighten up or repair your skateboard. This skate tool works with all types of the skateboards, penny board and long boards, it can help change wheels, clean your bearing

[Anti-Loss Structure]: The skateboard T tool includes 3 different sizes of sockets (3/8", 1/2", 9/16") and a slide-out Phillips head wrench screwdriver that fits into the top of the handle when not in use

The most advanced and precision fret end dressing file available - designed from the ground up specifically for fret ends - this is your most effective weapon in the battle against sharp fret ends, " fret sprout ", and a must-have for a smoother, faster playing guitar that inspires you to play more often.

Precision flat ground, diamond honed and polished bottom - so the file glides across your fingerboard without scuffing the wood, finish or binding. We've teamed up with one of Europe's oldest and most respected file makers to help us create this finely crafted file, then we put the finishing touches and final diamond hone and polish here in our shop. Definitely NOT made in China.

Top of file has a smooth, safe ground edge, and the upper corners and tip are completely rounded and beveled to prevent damage to your fretboard and guitar. Also comes with a top quality, made in USA hardwood handle that feels comfortable in your hand, and takes the pain out of working on your frets.

100% SATISFACTION GUARANTEED - We promise you will be stoked on this or your money back.

INCREDIBLE SPEED - Bones Reds are some of the best bearings in the world for a reason, they're awesome!

BEARING SIZE - Bones Bearings are bearing size 608, which measures 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter/axle).

Precise string action gauge in .010" (ten thousandths of an inch) number increments, and .005" line increments = super accurate guitar setup! The markings are NOT printed - they are actually laser etched through the black surface, deeply into the stainless metal. No printing to rub off! Also check out the new, precision 64ths string action gauge. The accuracy of the FretGuru 2 will bring your guitar out of the realm of woodworking and into another world of playability.

Unique, first of it's kind fret height/fret wear gauge in .005" increments. No more fumbling with calipers, straightedges or feeler gauges.

Fret rocker! The 3 unequal length sides are CNC machined, precision diamond honed and polished. Now you can find that pesky high fret without scratching your frets.

Faster Cut, Smoother Finish - The Dagger’s exclusive D.I.A. (Dual Integrated Arc) design gives you greater cutting control, perfect fret centerlines and a finer fret finish. It’s sharp enough to quickly bring the sides of the fret up to a clearly defined center, without worrying about accidentally taking too much off the top. Some of our customers have even called it foolproof.

Prevent Damage to Your Frets and Fretboard - with the Dagger’s exclusive smooth beveled, contoured edges. The angled cutting surfaces and ergonomic handle are balanced and comfortable, helping to reduce hand fatigue, and also preventing damage to your guitar body by allowing maximum file and finger clearance over the guitar body, switches and pots as you move up your guitar neck. In most cases there’s no need to mask off your fingerboard.

Avoid School Bus Roof Shaped Frets and Their Tone Destroying Effects - Precisely leveled and crowned frets are the very foundation of a great sounding guitar. Worn, grooved, flattened frets will rob you of tone, volume, while doing a number on intonation. Our professional grade crowning file was created with file masters in the heart of Europe to fix these issues. Made from high carbon European tool steel with razor-sharp teeth to deliver a clean, ready-to-be-polished cut every time.

Perfect for adjusting round screws

100% stainless steel combined with precision cut teeth

Soft suede microfiber backing keeps the metal off your gear

✔ Practical Needle Felting Kit: Including 30pcs 3.58" felting needles, 30pcs 3.39" felting needles, 30pcs 3.07" felting needles, 3pcs black clear bottles, 2 pcs wooden felting tool for meeting all of your needs for wool felting. Our felting needles and accessories are suitable for beginners and professionals, and three different models are suitable for different stages of making wool felt.

✔ Good Assistance for Your DIY Work: These Wool Felting Supplies including three kinds of needle size for satisfy your needs in making different small animals, dolls, toys and other craft job. And three black bottles hold the felted wool needle separately according to the needle size,convenient and avoid losing. And the model number is affixed to the bottle, so you can recognize the one you want to use at a glance.

✔ Superior Material Ensure Long Time Use: Our needle felting tools kit are made of superior metal and wood ,durable and ensure long time use.The wooden wool felting tool is free to replace all sizes of needles,very easy to use! The thick needle is suitable for the primary fast stab felting stage, the middle needle is suitable for the fixed shape stage, and the fine needle is suitable for the fine processing stage.

1. [Multi-functional Tool]: The multi functional skateboard T tool that allows you to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck to loosen or tighten your trucks for better control; which is perfect for completing skateboard assembly.

2. [All-in-One Design]: The all in one skate tools has everything you need to tighten up or repair your skateboard. This KVENI skate T tool is universal that can be used for repairing, tightening, or reassembling with all types of the skateboards, penny board, long boards, standard skateboard, bike, scooter, cruiser and more.

3. [Innovative Structure]: The T skateboard tool includes 3 different of size sockets: 1/2” for wheels, 3/8” for hardware, 9/16” for trucks, a slide-out Phillips head wrench screwdriver fits into the top of the tool, when not in use.

Package includes 1 x T-tool and 1 x Y-tool

All-in-one tool: has everything you need,suitable for most skateboard assembly, you can use it to adjust axle nuts, mounting hardware and so on

Compact:lightweight and portable,easy transport and storage,you can use it everywhere when you need

Package Dimensions: 16.8 cms (L) x 6.4 cms (W) x 16.8 cms (H)

Product Type: Instrument Parts And Accessories

Package Quantity: 1

1. [Multi-functional Tool]: The multi functional skateboard T tool that allows you to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck to loosen or tighten your trucks for better control; which is perfect for completing skateboard assembly.

2. [All-in-One Design]: The all in one skate tools has everything you need to tighten up or repair your skateboard. This KVENI skate T tool is universal that can be used for repairing, tightening, or reassembling with all types of the skateboards, penny board, long boards, standard skateboard, bike, scooter, cruiser and more.

3. [Innovative Structure]: The T skateboard tool includes 3 different of size sockets: 1/2” for wheels, 3/8” for hardware, 9/16” for trucks, a slide-out Phillips head wrench screwdriver fits into the top of the tool, when not in use.

Perform and record clean lines without unwanted string noise.

Easy to use, no tools or special installation required.

Works for guitars, basses, and other stringed instruments.

11 essential guitar setup tools. It is so compact that you can carry the MTZ11 in your pocket

The convenient center holes in the MTZ11's Body make it easy to access any tool you need

The wrench sizes are written clearly on the body for instant access and use

Perform and record clean lines without unwanted string noise.

Easy to use, no tools or special installation required.

Works for guitars, basses, and other stringed instruments.

Perform and record clean lines without unwanted string noise

Easy to use, no tools or special installation required

Works for guitars, basses, and other stringed instruments

Quilling Tools:Our quilling tools are made of plastic and stainless steel, which is sturdy and rust-proof , also it features durable that would not easy to be deformed.

Beautiful Colors: Quilling pens are in different color and light weight to use ,which is easy to carry and not take up too much space in the bag.

Practical Tool:The quilling pens make it easier to twirl paper and are much more comfortable to hold, can help to apply adhesive glue evenly,for thick paper and several glued strips, stretched out a variety of shapes.

SKATEBOARD HOME DECOR: A unique skate board accessory that turns your stake board stuff into an art mount, enhancing room aesthetics while keeping your gear safe and secure.

ESSENTIAL ORGANIZATION: Elevate your skateboard hanging game. This skateboard holder becomes an integral part of your skateboarding accessories, decluttering spaces and showcasing your passion.

GIFT WORTHY: Makes for perfect gifts for skateboarders, adding a unique touch to their skateboard shelves, while being practical and thoughtful, all in one.

9/16 Inch Socket - easily tighten or loosen your trucks

Adjustable hoof stand and cradle

Hoof stand, cradle and post

Make sure your next stained glass panel is straight and square!

Configure to fit panels up to 16" x 26"

Includes ten 6" blocks plus 40 push pins