Best Bexpaudpot in 2026

HIGH-QUALITY MATERIALS: The fuel tank is made of high quality stainless steel which is durable and not easy to rust. Simple and strong structure, anti-vibration, anti-explosion, it can maintain its performance in various environments.

VARIOUS SIZES: Length range of fuel sensor: 6inch-20inch.Output signal: 240-33ohm(240 ohms at empty,33 ohms at full). We have eight sizes of water level sensor of 150mm, 200mm, 250mm, 300mm 350mm, 400mm, 450mm and 500mm for your choosing, there is always one that can suit for you.

EASY TO INSTALL: Our fuel sending unit is easy to install and connect, just fix the sensor, then connect the wire, and it will start working.The standard SAE 5-hole pattern, brown wire for positive and blue for negative.

HIGH-QUALITY MATERIALS: The fuel tank is made of high quality stainless steel which is durable and not easy to rust. Simple and strong structure, anti-vibration, anti-explosion, it can maintain its performance in various environments.

VARIOUS SIZES: Length range of fuel sensor: 6inch-20inch.Output signal: 0-190ohms(0 ohms at empty,190 ohms at full). We have eight sizes of water level sensor of 150mm, 200mm, 250mm, 300mm 350mm, 400mm, 450mm and 500mm for your choosing, there is always one that can suit for you.

EASY TO INSTALL: Our fuel sending unit is easy to install and connect, just fix the sensor, then connect the wire, and it will start working.The standard SAE 5-hole pattern, brown wire for positive and blue for negative.

Spectra Premium fuel sending units meet or exceed the performance of the original equipment fuel sending units they replace

OE matched electrical connections

100 percentage tested fuel level senders

Help seal out contaminants

Help retain fuel tank sending unit

GM-recommended replacement part for your GM vehicleâ€s original factory component

Product Type:Electronic Switch

Item Package Weight:0.045 Kilograms

Item Package Dimension:0.762 cm L X12.192 cm W X14.732 cm H

<b>100TECH Stainless Steel Fule Tank Sending Unit is Made With OKI Reed Switch(Imported from Japan). It is the Direct Replacement for Arm Type sender. The Advantage of This Fuel Level Sender Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability. </b> <br> Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.<br>

The Fule/Water Level Sensor with American standard output 240-33 ohms (240 ohms at empty, 33 ohms at full). If you Need Lengths Other than 4"-24", Please Contact us Directly for More Information.<br>

[Easy to Install] The Fuel Level Sending Unit Comes with Gasket,Mounting Screws,Well-Written and Illustrated instructions; The Wiring Instructions are Straight Forward and Easy to follow. <br>

<b>[100TECH Fuel Sending Unit Features and Benefits] Made With OKI Reed Switch(Imported from Japan). SS Construction,SAE 5 hole Mounting Pattern, It's The Direct Replacement for OEM's Arm-Type Fuel Sender. </b> <br> The Advantage of This Sending Unit Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability.<br>

<b>[It Includes Everything You Need in the Package, Easy and Simple to Install] </b>The Fuel Level Sensor Comes with 1pc of Cork Gasket,5pcs of Mounting Screws,Well-Written and Illustrated instructions. Take about 15 Minutes to Intstall Total, No More Gas Fumes! <br>

Wide Application: For Use in <b>Diesel, Fuel, Gasoline, Water, OEM Replacement. </b> It Could Support Fuel Level Gauge and Water Level Gauge for Boat/Auto.<br>

[High Precision and Long Life]: The exterior is made of stainless steel, and the interior is controlled by high-quality reed switches. The sensor is corrosion-resistant, does not rust, has a long life, stable output signal, and accurate measurement. Suitable for gasoline, diesel, water, methanol, etc.

[Easy to Read]: The fuel level gauge has 8 adjustable backlight colors, IP67 waterproof, stainless steel frame, anti-fog curved glass, easy to read (Empty-1/2-Full).

[Easy Installation]: SAE 5 hole mounting pattern, NBR material gasket, good sealing performance, high oil resistance, with M5 5 screws, 10 quick wiring terminals, easy and quick installation by referring to the wiring diagram.

[High Precision and Long Life]: The exterior is made of stainless steel, and the interior is controlled by high-quality reed switches. The sensor is corrosion-resistant, does not rust, has a long life, stable output signal, and accurate measurement. Suitable for gasoline, diesel, water, methanol, etc.

[Easy to Read]: The fuel level gauge has 8 adjustable backlight colors, IP67 waterproof, stainless steel frame, anti-fog curved glass, easy to read (Empty-1/2-Full).

[Easy Installation]: SAE 5 hole mounting pattern, NBR material gasket, good sealing performance, high oil resistance, with M5 5 screws, 10 quick wiring terminals, easy and quick installation by referring to the wiring diagram.

<b>［Great replacement fuel sender］</b>The advantage of This doughnut float design type level sender over thick-film swim arm type level Sender is <b>the reed switch's durability and reliability. </b><br> Additionally, no moving parts to break. No adjustment needed for tank. It could support fuel level gauge and water Tank Gauge for Boat/RV/Truck.<br>

<b>［AODITECK Fuel Gauge］: </b> You can purchase <b> an AODITECK fuel level gauge in conjunction with an AODITECK sending unit </b> If your boat/camper didn’t have a fuel gauge, Both Will Work Great Together. <br> <b> There are several series gauge models at option.</b> <br>

<b>［More Reliable and Quality Construction］</b>All the AODITECK Fuel Sending Units are made With series of <b>Highquality reed switches and fixed resistors.</b> SAE 5 hole mounting pattern, heavy duty SUS 316 stainless steel and rugged construction. Signal Output: 240 ohms-33 ohms.<br>

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise

Precision tested fuel level sensors ensures vehicles fuel gage will provide an accurate reading at any fuel level

Includes strainers for smoother installation process and ensures a clean fuel system upon replacement

<b>［Great replacement fuel sender］</b>The advantage of This doughnut float design type level sender over thick-film swim arm type level Sender is <b>the reed switch's durability and reliability. </b><br> Additionally, no moving parts to break. No adjustment needed for tank. It could support fuel level gauge and water Tank Gauge for Boat/RV/Truck.<br>

<b>［AODITECK Fuel Gauge］: </b> You can purchase <b> an AODITECK fuel level gauge in conjunction with an AODITECK sending unit </b> If your boat/camper didn’t have a fuel gauge, Both Will Work Great Together. <br> <b> There are several series gauge models at option.</b> <br>

<b>［Finer resolution］</b>As the Short Tanks requires higher sensitivity than the taller tanks Do. <br> <b> AODITECK: Resolution of 7" Fuel Sending Unit is10mm.</b><br> Others : Resolution of 7" Fuel Sending Unit of some companies they offered is 21mm.

Fule Tank Sending Unit is Made SUS316 Stainless Steel , It is the Direct Replacement for Arm Type sender. The Advantage of This Fuel Level Sender is Durability and Reliability. Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.

The Fuel Level Sending Unit Comes with Gasket,Mounting Screws,Easy to Install.

The Fule/Water Level Sensor with American standard output 240-33 ohms (240 ohms at empty, 33 ohms at full).

Spectra Premium fuel sending units meet or exceed the performance of the original equipment fuel sending units they replace

Developed and tested to guarantee a perfect fit

OE matched electrical connections

🚗Wonfly 52mm Fuel Level Gauge Standard dial for a The diameter is 52mm 2'', indication range: E-1/2-F, working voltage: 9-32VDC (suitable for 12V-24V vehicle or engine), with wiring instructions.

🚗The fuel level gauge will accurately display fuel level remaining in your gas tank. It's ideal for anyone who is building a custom dash or looking to replace their stock fuel level gauge.

🚗Install diameter: Five signals adjustable: Signal Input: 0-190ohm, 0-180ohm, 10-180ohm, 240-33ohm, 240-30ohm, compatible with all sensors. No need to worry about the matching of Fuel level gauge and sensor.

Direct replacement - this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications

Restores functionality - reliable replacement for an original part that has failed due to internal sensor failure

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

Adjustable for 5" - 24" deep tank

Resistance specifications: Empty - 240 Ohms, Full - 33 Ohms. Be used for mobile and boat.

Features adjustable for 5" ~ 27" depth tank, mounting method: 5 hole mounting pattern, durable steel, and plastic construction easy to install.

It included in the packaged mounting gasket kit, installation manual.

2" (52mm) Diameter with Black Dial, Illuminated Red Needle & black face gauge, Turbo Boost/Vacuum Gauge Reads Vehicle's Boost Levels from -30 to 35 PSI & Vacuum Compression Levels.

Easily display at night:Our gauge is highly visible with a WHITE Light,easy viewing at all angles during any lighting conditions,DC 12V Turbo Boost Gauge Features a black bezel with black mounting panel.

Includes Mechanical Hose & T-Fitting - Black Dial -Clear Lens & Installation Instructions, no need other sensor,Come with the sensor can fit it well.

Fuel level sender

For use with Bosch fuel level gauges and 5" - 26" deep tanks

Includes gasket and mounting hardware

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise

Precision tested fuel level sensors ensures vehicles fuel gage will provide an accurate reading at any fuel level

Includes strainers for smoother installation process and ensures a clean fuel system upon replacement

✅Material✅The fuel sending unit is made with heavy duty 316 stainless steel. This water level sensor is a reed switch, durable and reliable, and the output signal is stable. No easy to rust.

✅Wide Application✅The fuel level sensor is suitable for ships, trucks, buses and marine. Fit for oil level gauges, water level gauges and various impurity-free liquids.

✅Easy to install&connect✅The Fuel/water sending unit is equipped with gaskets and mounting screws. The installation takes about 15 minutes in total for the fuel gauge to work again. Used different bolts but no problem.

Measures fuel level changes displayed on fuel gauge

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)

GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors

Spectra Premium fuel sending units meet or exceed the performance of the original equipment fuel sending units they replace

OE matched electrical connections

100 percent tested fuel level senders

Direct replacement - this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications

Restores functionality - reliable replacement for an original part that has failed due to internal sensor failure

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

Fit Type: Vehicle Specific

Direct replacement - this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications

Restores functionality - reliable replacement for an original part that has failed due to internal sensor failure

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

Help prevent contaminants from entering fuel tank sending unit

Help prevent fuel leaks

GM-recommended replacement part for your GM vehicleâ€s original factory component

Help prevent contaminants from entering fuel tank sending unit

Help prevent fuel leaks

GM-recommended replacement part for your GM vehicleâ€s original factory component

Package Dimensions: 19.304 H x 40.894 L x 22.86 W (centimeters)

Part number: PS126

Fit type: Vehicle Specific