Best Bike Hand in 2025

RACING TEAM SUPPORT LEVEL: The repair stand is made of full aluminum alloy with heavy duty plastic clamp compatible with all front fork axles. It is light weighted, and compact when folded. It is very convenient, durable and well-designed. This most stable repair stand is suitable for racing team support or home maintenance.

FULLY ADJUSTABLE: Height, axle clamp position,bike holder position and 360 degree rotation are adjustable by quick releases or turning knobs. So that is very helpful to get the bike in the optimal working position.

TOOL PLATE: Foldable magnetic tool plate included. Simply attach or remove the tool plate by hand for quick and easy set up and storage.

SIMPLE PUSH IN DESIGN - FIT all bikes up with maximum tire wide 5-Inch. Quick & Easy effortless push in system. Unlike other bike stands, which you need to lift the bike and put into. Our stand's front holder will tilt when you push the bike into the rack. This patented great design will be PERFECT for heavy bikes such as downhill, mountain and beach bikes.

MOST STABLE BIKE STAND – There are three points holding on the tires, much better than other stands which have only one or two points holding on the frame, rim, disc rotor and derailleur. The bike's front or rear wheel sitting in the holder is much deeper than others, so it stays firmly in the holdder. Plus a stylish dynamic stand base makes the bike impossible to be tilted if you do not push extremely hard onto the bike.

FOLDABLE & PORTABLE - A simple one-pull-knob will allow to fold the stand into a flat shape within a second, saving storage when not in use or to carry it into the car when going riding. Your bikes will never be lying on the ground or leaning against buildings or trees anymore.

FLOOR MOUNTED & COMPATIBILITY: Takes up to 5" Tire Width - Floor-mounted type, much more stable! Mounting bolts are included for your convenience. The stand is only compatible with 29“and 27.5” bikes. NOT FOR 20” and 24” kid’s bikes " and 26" wheels MTBs. beach cruisers and 700C road bikes

Patented SIMPLE PUSH IN DESIGN - Quick & Easy effortless push in system. Unlike other bike stands, which you need to lift the bike and put into. Our stand's front holder will tilt when you push the bike into the rack. This patented great design will be PERFECT for parking a bike into it

MOST STABLE BIKE STAND – There are three points holding on the tires, much better than other stands which have only one or two points holding on the frame, rim, disc rotor and derailleur. The bike's front or rear wheel sitting in the holder is much deeper than others, so it stays firmly in the holder. Plus a stylish dynamic stand base makes the bike impossible to be tilted if you do not push extremely hard onto the bike.

This free-standing floor stand is great when you still need the flexibility to move your bike around, whether it’s in your garage, bike store or at a race. Patent design awarded.

2 pulleys design with adjustable position. Fits any bikes with wheel size ranging from 24" to 29". Just a simple ‘slide in’ and that's it! ( Max tyre width: 2.4 inch ≈ 60 mm )

Either front or rear wheel slides in. Sitting in firmly to make the bike standing 100% stable. This rack only touches on the tyre, thus it’s great for any high end bikes. It brings no scratches on the bike’s frames, disc rotors, cassettes, etc.

This free-standing floor stand is great when you still need the flexibility to move your bike around, whether it’s in your garage, bike store or at a race. Patent design awarded.

2 pulleys design with adjustable position. Fits any bikes with wheel size ranging from 24" to 29". Just a simple ‘slide in’ and that's it! ( Max tyre width: 2.4 inch ≈ 60 mm )

Either front or rear wheel slides in. Sitting in firmly to make the bike standing 100% stable. This rack only touches on the tyre, thus it’s great for any high end bikes. It brings no scratches on the bike’s frames, disc rotors, cassettes, etc.

Application: Tool For install and remove the crank arm dust cap

Compatibility: Only compatible with Shimano 8 teeth internal splines dust cap

Top Quality: Sturdy plastic material makes sure you do the maintenance with confidence

SOLID & STABLE: Solid one piece steel construction bike hub mount type. With its 5 lbs weight and the 11 inch wide base, this solid stand can hold the bike at ease.

EASY TO USE:Just place the rear hub axle into the holder. Fast and simple bike parking solution.

COMPATIBILITY: FIT 26”, 27.5” and 700c bikes: It is best to be used with non-disc brake bikes as long as there is a gap between hub and frame. For 29" bikes, please look at the other model with higher or adjustable holding arm. (YC-109H or YC-109AF)

LIMITATIONS: Please check the size before buy. This is great for 29" and 700c Bikes. Too TALL for 27.5" & 26" bikes.

SOLID & STABLE: Solid one piece steel construction bike hub mount type. With its 5 lbs weight and the 11 inch wide base, this solid stand can hold the bike at ease. Just place the rear hub axle into the holder. Fast and simple bike parking solution.

COMPATIBILITY: FIT 29" and 700c bikes: It is best to be used with non-disc brake bikes as long as there is a gap between hub and frame. For 26" or 27.5" bikes, please look at the other model with lower or adjustable holding arm. (YC-109L or YC-109AF)

LIMITATIONS: Please check the size before buy. This is great for 29" and 700c Bikes. Too TALL for 27.5" & 26" bikes.

SOLID & STABLE: Solid one piece steel bike hub mount type. With 5 lbs weight and 11 inch wide base, this solid stand can hold the bike at ease.

COMPATIBILITY: FIT 29" and 700c bikes: It is best to be used with non-disc brake bikes as long as there is a gap between hub and frame. For 26" or 27.5" bikes, please look at the other model with lower or adjustable holding arm. (YC-109L or YC-109AF)

PLEASE CHECK THE COMPATIBILITY OF THIS TOOL BEFORE PURCHASE. DO NOT PURCHASE IF YOUR BOTTOM BRACKET ISN’T A 16-NOTCH TYPE OR ISN’T IN 44MM OR 39MM DIAMETER.

THIS TOOL DOES NOT FIT Shimano Ultegra BBR60 6800 series and XT BB-MT800 DEORE XT M8000 series.

COMPATIBILITY I: Shimano Hollowtech II. BB type: 16-notch, 44mm diameter external bearing bottom bracket cups. Compatible with some of the FSA, SRAM, and Truvativ bottom brackets too if the specs are the same. Also fits disc brake rotor lockrings with 16 external notches. NOTE: It will fit Shimano TL-FC24 and TL-FC25 adapters.

MULTI-FUNCTION: This tool features a 15mm pedal wrench and 14mm&15mm sockets, which are made for mounting and disassembling pedals from cranks without scratching the crank arms, as well as turning a nut or bolt without repositioning the tool on the fastener to improve work efficiency.

PREMIUM QUALITY: This tool is made of durable heat-treated steel that will prevent it from bending and wearing off through years of use. The dual-density moulded extra-long handle provides better leverage and reliable grip during operation.

SPECS: Length is 23cm/9.05inches.

PERFECT SETTING: The star nut need to be tapped into the fork steerer at the right position. Too low, the headset bolt cannot reach. Too high, the star nut cannot bite the steerer wall tightly.

COMPATIBILITY: The Threadless Nut Setter is used to install the star-fangled nut found on 1-1/8” threadless headset systems.

EASY TO USE: Install the star nut onto the tool and tap it into the fork steerer using a hammer.

Chain rivet extractor (YC-336) for 7-11 speed Shimano chain compatible, extra pin.Dust cap wrench (YC-27).Chainring nut wrench (YC-271).Flat 5mm/Phillips screwdriver (YC-611).8mm hex key wrench 1/2' adaptor (YC-812LE)

Flat screwdriver 3mm (YC-612).Tire lever set (YC-305D).YC-T20, YC-T25, YC-T30.Hex key wrench 2/2.5/3/4/5/6mm (YC-613-BK).3 Size bottom bracket wrench for Shimano hollowtech II BB, BBR60 and BB9000 (YC-307BB)

Freewheel and pedal wrench (YC-515) 15mm x 2, 11-speed cassette compatible.Freewheel tool (YC-126-1A).Cartridge bottom bracket tool (YC-26BB-1A).Master link tool 2-way function (YC-335CO).Chain hook (YC-207)

TOOL KIT PART I: Chain Rivet Extractor; Flat Screwdriver 3mm; Hex Key Wrench; Chain Ring Nut Wrench; Dust Cap Wrench; 8mm Hex Key Wrench & 1/2” Drive Adaptor; Flat/Phillips Screwdriver T25; Pedal Wrench, 15mm Spanner & 14/15 Socket Wrench for Rear/Front Hub Nut.

TOOL KIT PART II: Lock Ring Remover; Freewheel Turner; Hub Cone Spanner; Bottom Bracket Wrench; Spoke Wrench; Cartridge Bottom Bracket Tool; Crank Puller; Patch Kit; Essential Torque Wrench Kit.

MADE TO LAST: All the tools are well built and constructed with pro-quality material, forethought, and genuinely exceptional with their attention to detail, which will prevent the tools wear through the years of use. Whether you are heavy bike enthusiasts or professionals, if you are trying to get your bikes fixed, then this tool kit is undoubtedly the best choice for you to have as it will satisfy most of your bike maintenance needs.

COMPATIBILITY I: Shimano 16-Notch X 44mm: Fits 16-notch, 44mm diameter external bearing bottom bracket cups includes Shimano Hollowtech II, Campagnolo Ultra-Torque and Power Torque, FSA, GXP, Truvativ, and Phil Wood outboard bearing. Also fits disc brake rotor lockrings with 16 external notches. NOTE: Will fit Shimano TL-FC24 and TL-FC25 adapters.

COMPATIBILITY II: Bottom Bracket Wrench, Shimano 16-Notch X 41mm: New for 2015. Fits Shimano BBR60 (Ultegra 11-speed 6800 Series) and BB-MT800 (DEORE XT M8000 Series ) bottom brackets.

COMPATIBILITY III: Bottom Bracket Wrench, Shimano 16-Notch X 39mm: New for 2015. Fits Shimano XTR BB93 and Dura-Ace BB9000 bottom brackets.

QUALITY: This Bikehand YC-307BB is a triple-ended bottom bracket wrench. 30cm whole length to provide great leverage and is made of high-quality heat treated steel for improved functionality and longer life.

COMPATIBILITY I: Shimano 16-Notch X 44mm: Fits 16-notch, 44mm diameter external bearing bottom bracket cups includes Shimano Hollowtech II, Campagnolo Ultra-Torque and Power Torque, FSA,GXP, Truvativ, and Phil Wood outboard bearing. NOTE: Will fit Shimano TL-FC24 and TL-FC25 adapters.

COMPATIBILITY II : Bottom Bracket Wrench, Shimano 16-Notch X 41mm: New for 2015. Fits Shimano BBR60 (Ultegra 11-speed 6800 Series) and BB-MT800 (DEORE XT M8000 Series ) bottom brackets.

COMPATIBILITY I: compatible with Shimano 16-Notch X 44mm: Fits 16-notch, 44mm diameter external bearing bottom bracket cups including for Shimano Hollowtech II, Campagnolo Ultra-Torque and Power Torque, Race Face X-type, FSA MegaExo, SRAM/Truvativ GXP, Chris King, and Phil Wood outboard bearing. compatible with Shimano BB80, BB5700, XT BB70, BB51, and previous external bearing threaded cups. Also fits disc brake rotor lockrings with 16 external notches.

COMPATIBILITY II: Fits 16-notch, 49mm diameter external bearing bottom bracket cups including FSA Mega Evo, Wheels Manufacturing PF30, Wheels Manufacturing T47, GUB BB386, and others. NOTE: It will be compatible with Shimano TL-FC24 and TL-FC25 adapters.

EXTRA LONG HANDLE: It provides better leverage to remove really tough bottom brackets, and the non-slip rubber grip offers stronger friction for ease of use.

2 screws mounted either on the wood table or wall stud if necessary. Do not screw into unsupported or hollow wall.

Ball-type Hex Wrench and the T-handles are ergonomically perfect for comfortable use

The hex wrench set includes 2mm, 2.5mm, 3mm,4mm, 5mm, 6mm, 8mm, 10mm sizes

SMART DESIGN: This tool is specially designed for removing the crank arm off the BB without taking off the pedals. Please watch the video in the listings for more details.

FIT SQUARE TAPER BB ONLY: Special design for threads and square tapered crank arm. Does NOT fit ISIS or Octalink crankset.

HEAT TREATED: Heat-treated high-quality steel constructed for long-time use.

COMPLETE: This Bikehand Tool Kit comes with a range of most common bike tools. It is very easy to use for regular bike service, such as cleaning chain, changing tire, changing bottom bracket, adjust shifter and brake cables.

HOME MECHANICS LEVEL: Good value tool kit for home use. The new torque 2-10nm wrench is also included in the deal. The torque wrench is an important tool to tight carbon parts such as handlebar, stem and seatpost.

HEAT TREATED: Heat treated high quality steel constructed for long time using. Tough and perfectly match the BB notches, screws, spoke lock nuts, pedal spindle and crank arm thread etc.

FREE UP SPACE: Looking for a solution to organize your garage to save floor space? This is the one you've been looking for. This wall mount rack is great for use in a garage or apartment with limited space. Get organized by hanging the bike on the wall to free up some valuable space so there can be more room to store other items.

HIGH-QUALITY HEAVY DUTY RACK: Made of premium powder-coated steel with anti-rust design. Anti-scratch coating and rubber padded on the pedal hook better protect your wall from dirt or damage. This set of wall hangers is designed to fit most bikes, including Mountain Bikes, Road Bikes, Kids Bikes, Hybrid Bikes, Cyclocross, and Lady Beach Cruiser Bicycles. Each hook can hold up to 20kg/45lbs (each bike).

NO TUNING HANDLEBAR: The wheels are sitting again the wall. So no more turning handlebar or wheels which could be accidentally knocked. The easy-to-take design also makes it simple to take out or hang up your bikes and lets you hang or detach your bikes in a second. No more mess!

Newest Complete Bicycle Tool Kit with Torque Wrench

The Bikehand Complete Bike Repair Tool Kit contains everything the home mechanic would need to maintain their bike. This tool kit is made with a very high quality standard which contains 23 items in it.

From tyre levers to bottom bracket installation tools, it will definitely help you to keep your bike well maintained. The torque wrench in the set allows parts to be fit to manufacturer recommended settings, without over or under-tightening which might damage the component. Using this kit to maintain your bike by yourself is absolutely going to save your cost!

FREE UP SPACE: Looking for a solution to organize your garage to save floor space? This is the one you've been looking for. This wall mount rack is great for use in a garage or apartment with limited space. Get organized by hanging the bike on the wall to free up some valuable space so there can be more room to store other items.

HIGH-QUALITY HEAVY DUTY RACK: Made of premium powder-coated steel with anti-rust design. Anti-scratch coating and rubber padded on the pedal hook better protect your wall from dirt or damage. This set of wall hangers is designed to fit most bikes, including Mountain Bikes, Road Bikes, Kids Bikes, Hybrid Bikes, Cyclocross, and Lady Beach Cruiser Bicycles. Each hook can hold up to 20kg/45lbs (each bike).

NO TUNING HANDLEBAR: The wheels are sitting again the wall. So no more turning handlebar or wheels which could be accidentally knocked. The easy-to-take design also makes it simple to take out or hang up your bikes and lets you hang or detach your bikes in a second. No more mess!

Free Up Garage Space : It's great for garage,home,apartment with limited space.Hanging the bike on wall means free up valuable space. No more mess! You have more space to storage other items! solution to organize your garage free up space?This is the one you're looking for.

Heavy Duty Bike Hangers : The hanger is fixed to the wall with 4 screws. Every hanger holds up to 25kg or 55lbs ,it securely hold a normal bike on wall.(We highly recommend mount on stud.) The easy-to-take design makes it easy to take out and hang up the bike. You don't need to worry the hook will scratch the rim,as the hook cover with rubber.

Suitable for Most Bikes: Bikehand bike hanger is designed to fit most of bikes.Like Mountain Bike,Road Bike, Lady Beach Cruiser Bicycle etc. Fit all wheels size 14" to 29" in the range of the followings: (Max: Tire width: 2.4". Max rim depth for 700c: 50mm with max tire width: 25c.)

STYLISH ALLOY: The hanger is made of aluminium alloy with STAINLESS STEEL bolts and coated by shinning painting, which lasts for a long time and looks gorgeous when a bike hanged on it. Outdoor available.

LARGE TIRE& WHEEL COMPATIBLE: The inside gap between wall and hanger is so big. Max rim depth: 50mm. Mounting flange has 2 holes, allowing use of bolts or lag bolts to mount. You can switch the hanger if you want the bike to hang on the left or right of it.

EASY HANGING: The hanger bar shape is a straight bar with a groove in the middle, compared with traditional hook. Very easy to hang your bike on it. Also the EVA coated hanger is so thick, it protects the rim better, such as carbon rims. Disadvantage: There is no holder or plate , so the front tire may leave marks on the wall.

STYLISH ALLOY: The hanger is made of aluminium alloy with STAINLESS STEEL bolts and coated by shinning painting, which lasts for a long time and looks gorgeous when a bike hanged on it. Outdoor available.

LARGE TIRE& WHEEL COMPATIBLE: The inside gap between wall and hanger is so big. Max rim depth: 50mm. Mounting flange has 2 holes, allowing use of bolts or lag bolts to mount. You can switch the hanger if you want the bike to hang on the left or right of it.

EASY HANGING: The hanger bar shape is a straight bar with a groove in the middle, compared with traditional hook. Very easy to hang your bike on it. Also the EVA coated hanger is so thick, it protects the rim better, such as carbon rims. Disadvantage: There is no holder or plate , so the front tire may leave marks on the wall.

COMPATIBILITY: Tools to install and remove Shimano and Sram Cassette off the hub body. Compatible with 7-12 speeds chain. Fits all Shimano cassettes, including road bikes and mountain bikes.

LONG & HEAT TREATED: Long handle for easily removing the rusted cassette from the wheel hub body. Heat-treated high-quality steel constructed for long-time use. Please watch the video in the listing for details.

RUBBER COATED: Better grip with a rubber-coated handle which is long enough for more leverage.

Updated and best collection , Chain ring nut wrench (YC-271), Chain scrubber (YC-790), Master link tool (YC-335CO)

cable cutter (YC-767), Tire lever set (YC-305D), Spoke wrench 3.2/3.3/3.5/4.0mm (YC-8F), Chain hook (YC-207)

Pedal wrench (YC-658-15S-4T), 8mm hex key wrench/ square adaptor (YC-812LE),Chain wear indicator (YC-503), Freewheel turner/Pedal wrench (YC-515),Bottom Bracket wrench, for Hollowtech II BB, BB-9000, BBR60 (YC-307BB),Chain rivet extractor (YC-324SC),Flat/Phillips screwdriver (YC-611), Hex key wrench 2/2.5/3/4/5/6mm (YC-613)

WHAT'S INCLUDED: This 6 pieces precision bike cleaning brush set includes 1x cleaning brush with the water hose connector, 1x bristle soaping brush, 1x tapered brush, 1x sponge and bristle brush, 1x C-shaped brush and 1x gear clean brush.

EASY TO USE: Durable and lightweight, this set of cleaning brushes is very easy to carry and use. The bristle soaping brush has a wide head for general cleaning on surfaces and frames. The tapered brush is perfect for getting into the hard-to-reach areas.

PRECISION CLEANING: The sponge and bristle brush is made of dual-material material and is great for heavy-duty scrubbing. The C-shaped brush is made for cleaning the bike frame tubes and tires, while the gear clean brush comes with 3 different heads for removing grease and mud on the crank and corners.

Floor Mounted Type, More Stable Mounting Bolt Included

Patented SIMPLE PUSH IN DESIGN - Quick & Easy effortless push in system. Unlike other bike stands, which you need to lift the bike and put into. Our stand's front holder will tilt when you push the bike into the rack. This patented great design will be PERFECT for heavy bikes such as downhill, mountain and beach bikes.

MOST STABLE BIKE STAND – There are three points holding on the tires, much better than other stands which have only one or two points holding on the frame, rim, disc rotor and derailleur. The bike's front or rear wheel sitting in the holder is much deeper than others, so it stays firmly in the holdder. Plus a stylish dynamic stand base makes the bike impossible to be tilted if you do not push extremely hard onto the bike.