Best Blue Stone Safety in 2026

FITS ALMOST EVERYWHERE: Under a desk, kitchen cabinets, closets, side of your bed, on a wall, virtually anywhere!

FITS A VARIETY OF REVOLVERS & AUTOMATICS from compact to full size.

THICK RUBBER BACKING PLATE will not scrach your handgun like Magnets and mounts easily with included hardware

GUN FIT: 4 inch to 6 inch barrel single and double action revolvers. Ruger Redhawk, Colt Army, etc

QUALITY: Handcrafted embossed American flag by Amish workers and made with vegetable tanned leather

SAFETY: Black Oxide snaps prevent scuffs and marks. Scratch guard covers hold gun safely in place

Ambidextrous Design for both left handed or right handed shooters

A convenient concealment option gives you the element of surprise

High quality breathable elastic ankle comfort

GUN FIT: IWB Holster is compatible with Glock 17 19 22 26 30 1911 Ruger SR9 S&W Shield Sig 229 and similar mid to full handguns.

DEPENDABLE: Spring steel clip grips your belt and holds steady while moving or drawing your firearm.

KYDEX MAGAZINE POUCH: Securely hold an extra pistol mag with excellent retention in our special pouch

GUN FITS: Glock 42, 43, Ruger LCP, .380 Handgun, S&W Shield, or Sig P938 carry easily in your leather holster case!

QUALITY: Hancdrafted by Amish workers with Genuine 9.5 ounce leather to ensure your satisfaction. Works as an excellent alternative to a pancake holster.

SIZE: Small leather holster case is 5" x 6.5"

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees with Phillips Screwdriver (No Special Tools Needed!)

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch ABS

Posi 'Click' Audible Retention Lock System - Integrated Full Length Sweat Guard - Black Oxide Treated Hardware w/Threadlock

Fits: Jericho 941 F9 FS Steel Frame

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch ABS

Fits: Beretta APX Carry

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch ABS

EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw; Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights; Full Length Sweat Guard & Rear Sight Shield to protect your weapon from sweat; Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying; We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw

TUCKABLE INSIDE THE WAISTBAND KYDEX HOLSTER fits: Canik TP9SF / TP9SF Elite (ONLY unless Specified); Our minimalist Tuckable IWB holsters are designed to be worn comfortably inside the waistband with either a tucked or untucked shirt for proper concealed carry; We use .08 inch KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds; This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all our holsters

Item will be imported from US

'Posi-Click' Audible Retention Lock System - Integrated Full Sweat Shield

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees

Fits: GLOCK G19 - G23 - G32

EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw; Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights; Full Length Sweat Guard & Rear Sight Shield to protect your weapon from sweat; Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying; We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw

TUCKABLE INSIDE THE WAISTBAND KYDEX HOLSTER fits: Canik TP9SF / TP9SF Elite (ONLY unless Specified); Our minimalist Tuckable IWB holsters are designed to be worn comfortably inside the waistband with either a tucked or untucked shirt for proper concealed carry; We use .08 inch KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds; This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all our holsters

Item will be imported from US

EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw; Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights; Full Length Sweat Guard & Rear Sight Shield to protect your weapon from sweat; Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying; We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw

TUCKABLE INSIDE THE WAISTBAND KYDEX HOLSTER fits: Canik TP9SF / TP9SF Elite (ONLY unless Specified); Our minimalist Tuckable IWB holsters are designed to be worn comfortably inside the waistband with either a tucked or untucked shirt for proper concealed carry; We use .08 inch KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds; This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all our holsters

Item will be imported from US

Integrated Full Sweat Shield

Package Dimensions: 9 inch L x 6 inch W x 3 inch H

Package weightthe Product: 3.46 Ounces

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees with Phillips Screwdriver (No Special Tools Needed!)

Posi 'Click' Audible Retention Lock System - Integrated Full Length Sweat Guard - Black Oxide Treated Hardware w/Threadlock

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch Fiber Reinforced Stealth ABS - Claw Compatible: Yes

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees with Phillips Screwdriver (No Special Tools Needed!)

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch ABS

Posi 'Click' Audible Retention Lock System - Integrated Full Length Sweat Guard - Black Oxide Treated Hardware w/Threadlock

QUICK RELEASE BUCKLE UPGRADED VERSION：The crafted heavy-duty buckle, made of aluminium alloy, has very strong load-bearing capacity, which can meet your different wearing requirements. The upgraded part is that it is more convenient to adjust the length to perfect fit more than you can imagine. If you want to understand more intuitively how to be more convenient, you can watch our short tactical video

HIGH QULITY STRETCH NYLON：We intent to make the strap be stretch. The strap is made by special stretch material which is more solid than regular belt. More than that, it is very sturdy as well as stretch, which make your waist be more comfortable as well as stay tight, when you take large range of activities. Anyone who do physical activities for a long period of hours will get a great use out of the tactical belt

FOR SPECIAL YOU: Our solid belt suits for military, SWAT, fire fighters, work, sport and other tactical users. Anyone who need to take any activity will be in harmony with the belt

Fits: Springfield XD-S 4.0 inch 9MM/45ACP - Carry: Appendix, Hip, Cross Draw, Palm-In Back - **For Palm-Out Back / OWB Carry - Select Opposite Draw Hand**

Posi 'Click' Audible Retention Lock System - Integrated Full Length Sweat Guard - Black Oxide Treated Hardware w/Threadlock

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees with Phillips Screwdriver (No Special Tools Needed!)

Posi 'Click' Audible Retention Lock System - Integrated Full Length Sweat Guard - Black Oxide Treated Hardware w/Threadlock

Compatible with: Glock 17/19/22/23/26/27/31/32/33/45 (Gen 1-5)

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch Fiber Reinforced Stealth ABS - Claw Compatible: Yes

Fits: GLOCK 17,19,22,23,26,27,31,32,33 (Gen 1-5

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees with Phillips Screwdriver (No Special Tools Needed

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch ABS

Posi 'Click' Audible Retention Lock System - Integrated Full Length Sweat Guard - Black Oxide Treated Hardware w/Threadlock

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees with Phillips Screwdriver (No Special Tools Needed!)

Fits: GLOCK G30S - Carry: Appendix, Hip, Cross Draw, Palm-In Back - **For Palm-Out Back / OWB Carry - Select Opposite Draw Hand**

EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw; Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights; Full Length Sweat Guard & Rear Sight Shield to protect your weapon from sweat; Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying; We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw

TUCKABLE INSIDE THE WAISTBAND KYDEX HOLSTER fits: Canik TP9SF / TP9SF Elite (ONLY unless Specified); Our minimalist Tuckable IWB holsters are designed to be worn comfortably inside the waistband with either a tucked or untucked shirt for proper concealed carry; We use .08 inch KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds; This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all our holsters

Item will be imported from US

'Posi-Click' Audible Retention Lock System - Integrated Full Sweat Shield

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees

Fits: Smith & Wesson Bodyguard 380 w/Insight Laser

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees with Phillips Screwdriver (No Special Tools Needed!)

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch ABS

Posi 'Click' Audible Retention Lock System - Integrated Full Length Sweat Guard - Black Oxide Treated Hardware w/Threadlock

Posi 'Click' Audible Retention Lock System - Integrated Full Length Sweat Guard - Black Oxide Treated Hardware w/Threadlock

Fits: Ruger SR9C - Carry: Appendix, Hip, Cross Draw, Palm-In Back - **For Palm-Out Back / OWB Carry - Select Opposite Draw Hand**

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch ABS

EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw; Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights; Full Length Sweat Guard & Rear Sight Shield to protect your weapon from sweat; Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying; We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw

TUCKABLE INSIDE THE WAISTBAND KYDEX HOLSTER fits: Canik TP9SF / TP9SF Elite (ONLY unless Specified); Our minimalist Tuckable IWB holsters are designed to be worn comfortably inside the waistband with either a tucked or untucked shirt for proper concealed carry; We use .08 inch KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds; This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all our holsters

Item will be imported from US

Fits: Walther PPQ

Style: Inside the Waistband (IWB)

Thickness: .08 inch KYDEX - Weighs just over 2 Oz.

EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw; Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights; Full Length Sweat Guard & Rear Sight Shield to protect your weapon from sweat; Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying; We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw

ADJUSTABLE POSI-CLICK RETENTION, RIDE HEIGHT & CANT: When you holster your Ruger LCP II, you'll hear a satisfying CLICK letting you know your weapon is securely holstered & wont come out unless YOU want it to; Retention pressure is adjustable, as is ride height (Standard, Shallow & Deep Conceal); Cant (Carry Angle) is adjustable from -30 to +30 Degrees, allowing you to angle the holster perfectly for appendix (AIWB), strong side, behind the hip or cross draw carry positions

OPTIONAL ACCESSORIES - CLAW COMPATIBLE: Our Ruger LCP II Tuckable IWB Holster is now Claw Compatible; Our optional Claw Kit cleverly eliminates printing forever by utilizing your belt to angle the butt of your weapon in towards your body; This effectively makes your weapon disappear inside your belt line; VOur Tuckable holsters are also compatible with the Ulticlip3 and/or Ulticlip XL, plus our Low Profile and PTD Soft Belt Loop Kits, making these the most versatile IWB Holsters available

EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw; Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights; Full Length Sweat Guard & Rear Sight Shield to protect your weapon from sweat; Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying; We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw

TUCKABLE INSIDE THE WAISTBAND KYDEX HOLSTER fits: Canik TP9SF / TP9SF Elite (ONLY unless Specified); Our minimalist Tuckable IWB holsters are designed to be worn comfortably inside the waistband with either a tucked or untucked shirt for proper concealed carry; We use .08 inch KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds; This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all our holsters

Item will be imported from US

Fits: Sig Sauer P320 Compact - Carry: Appendix, Hip, Cross Draw, Palm-In Back - **For Palm-Out Back / OWB Carry - Select Opposite Draw Hand**

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees with Phillips Screwdriver (No Special Tools Needed)

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz - Standard Belt Clip: 1.5 inch ABS

'Posi-Click' Audible Retention Lock System - Integrated Full Sweat Shield

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees

Fits: Taurus 738