Best Canitu in 2026

2-in-1 Tile and Glass Cutter: The professional 2-in-1 tile and glass cutter comes with 3 tungsten steel blades, 1 3-15mm manual cutting tool and 4 pressure heads. Our glass cutting tool combines cutting and grinding functions in one, no need for an angle grinder. More convenient, save more money, portable and durable, subverting the traditional embedded design, perfect combination tool of mirror cutter and delimiter

Fine Tungsten Blade: The glass tile cutter wheel is made of hard tungsten steel alloy material, which has the advantages of high hardness and fast cutting so that you can cut glass and tile easily in a few seconds. Our glass cutter can be used to cut sharp edges of glass and any stained glass. It is a must-have tool that helps DIY products

Ergonomic Handle: The ergonomic handle helps reduce wrist fatigue for a more efficient workflow. Using engineering plastic, afterburner handle, ergonomic grip, more comfortable hand feeling, better strength, plastic surface does not scratch, screwing is easier and more labor-saving, conducive to long-term operations

The Dirt Bike Front Fender Fits for Sur-Ron Light Bee .

The Front Fender Has Good Toughness and is Not Easy to Break When Twisted.It Can Provide Effective Protection.

Powerful Anti-Mud. The lower edge of our mud guard is side by side with the rear tire fender, and they share a screw hole position. It makes it unnecessary to remove the rear tire mud guard when installing our mudguard. This greatly increases the anti-mud effect and the service life of post-shock absorption.

When you buy a new SURRON bike, mud guard is not included in most cases. In order to protect the expensive rear shock absorption, you have to spend lots of money to get the original mud guard. At this time, you have an alternative plan to buy modified products with higher cost performance.

Match Smoothly. As shown in the picture on the left, the two feet of our mud guard correspond to the screw holes one by one, and its head is just right to be installed behind the rear signal indicator. The perfect size improves the overall perception of the bike to a higher level.

Powerful Anti-Mud. The lower edge of our mud guard is side by side with the rear tire fender, and they share a screw hole position. It makes it unnecessary to remove the rear tire mud guard when installing our mudguard. This greatly increases the anti-mud effect and the service life of post-shock absorption.

Fit: Pistol grip shift knob shifter for Can-Am Outlander Renegade

Usage: Directly replace your traditional gear knob with this stylish one, add a elegant and fashionable look to your car, greatly increase your driving experience

Easy to Install: no modification is required. This shift lever knob adopts excellent manufacturing process and ergonomic handle design, which can provide you with a comfortable hand touch feeling, just directly replace your traditional gear knob with this stylish one

Fitment: For Honda GROM 2014-2021. Does not work on 2022+ year model Groms

Material: The Chain Adjusters is made from Billet aluminum and CNC Machining. Anodizing, not easy to fade and will not rust,hard anodized can greatly prevent corrosion and oxidation, ensuring that it will last for a long time.

Function: Perform chain adjustments and rear maintenance without the hassle of the chain adjusters constantly falling out of place. Our tensioner axle chain adjuster kit is designed to stay in place while also providing a safe way of lifting the rear of your for Honda Grom onto a paddock stand using the integrated spools

The cradle mount frame bracket fit for Honda CRF110 2013-2022,it protect your Investment with the frame cradle for CRF110. Helps reduce the strain on the cases from your footpeg bracket.

The cradle mount frame bracket is made of 6061 T6 Aircraft Aluminum,high quality corrosion resistant mounting hardware included.

The cradle is designed to help distribute the weight/force off of the peg mounts by bolting to the rear peg mount and to the pit bikes frame,cradle works with aftermarket skid plates that do not use the rear peg mount bolts.

Fitment for Honda TRX250R / TRX450R / TRX400EX / TRX250X / TRX400EX

Made of 6061-T6 Aluminum. Aluminum material also is stronger and lightweight for a long lifetime,designed to maximize ground clearance. Sprocket Guard Chain Protector can help protect your sprocket and chains from the branches and other sundries, reduce the damage from an accident

Machined by CNC. High precision and reliable quality are absolutely ensured

Fitment: For Raptor 700 YFM 700 2006-2019. For Raptor 700R YFM 700R 2006-2009 2011-2019. Fits all model years for Yamaha Raptor 700 700R. Fits up to 15 tooth sprocket 520 or 530 chain

Material: Our case savers are built with CNC 6061-Aluminum material to ensure they will fully protect your case from the chain, and take the brunt forces that could cause detrimental damage to your motorcycle

Case saver is an extremely important part that can save you hundreds of dollars in the long run. The product is designed to keep your expensive engine case safe, the case saver is ready to guard in the event of a chain de-railing or breaking. It is a state of the art dirt bike protective part that will keep your case safely protected from the chain if it ever breaks

The kick start starter fit for Yamaha YZ85 2002-2023 for Dirt Bike Off Road Motorcycle,each kick starter is built to last. Made with precision to meet or exceed OEM quality and fitment.Replaces OEM Part # 5PA-15620-01-00, 5PA-15660-00-00

Designed with sharp teeth to give you a firm grip on your shoes, so that your foot is not likely to slip from the lever.

The kick start starter is from forged 7075 Aero grade aluminium, each kick-start is then anodised to a specific manufacturers colour, and has a laser-etched on the back of the kick arm.The features a mounting bracket that is made from hardened steel with a zinc-plated finish.

The kick start starter fit for Yamaha YZ125 1986-2023 for Dirt Bike Off Road Motorcycle,each kick starter is built to last. Made with precision to meet or exceed OEM quality and fitment.Replaces OEM Part # 4DB-15620-10-00

Designed with sharp teeth to give you a firm grip on your shoes, so that your foot is not likely to slip from the lever.

The kick start starter is from forged 7075 Aero grade aluminium, each kick-start is then anodised to a specific manufacturers colour, and has a laser-etched on the back of the kick arm.The features a mounting bracket that is made from hardened steel with a zinc-plated finish.

The Front sprocket cover guard protects for HONDA CRF110 2013-2022,Max 14T front Sprocket, protect your valuable engine cases, greatly reduce mud buildup, and add huge style points for CRF110 with the billet sprocket guard.Does not work combined with the Case Saver.

The front sprocket cover guard is made of CNC machined 6061 billet aluminum and powder coated with a black texture finish. Direct replacement for factory plastic guard. Stainless hardware supplied. Will work with or without the steel factory case saver. (Designed to hide the factory case saver.)

Has a small scratch on the inside sprocket cover, once installed you can not visibly see the scratch. Unique design make the bike more attractive.

The sprocket guard cover fit for Yamaha YZ125 1993-2004,this new design protects valuable ignition covers and center cases in one cohesive unit.

The sprocket guard cover is made of anodized 6061 Billet Aluminum with strong corrosion resistance and wear resistance,itwill reduce the weight of the vehicle and give you a better ride speed, it is perfect for the race.

The sprocket case saver was built to protect your fragile engine case and clutch slave cylinder,reinforced front portion rests solidly up against the case to support and prevent the Case Saver from breaking or ripping the sprocket cover bolts on impact.

The MARSHALLTOWN Ultra-Lite Flooring Cutter 13" is essential for your next vinyl, laminate, or engineered hardwood flooring installation

Cuts products up to 13" wide, 12 mm thick, and a Janka hardness of 1200

At 14 pounds, this handy shear allows you to cut where you work without dust, noise, or electricity

Turn your rotary tool into a powerful cutting machine

Ideal for cutting ceramic wall tile, cement board and plaster (Not for use on floor tile)

Tile Cutting Bit features a 1/8 In. (3.2mm) diameter

【Why choose us】 With Storystore Leveling System tile installation-great tools for floor/wall setting.The system ensures flatness between tiles avoiding movements during the mortar setting,Saves tile installation time and money with less effort, it is the best gift for professionals and DIYs who want to install the tile of wall and floor

【100 pcs Tile Wedge】 The wedge allows for a 1/12" minimum grout joint, and it firmly holds the tile in place, This is the most economical tile leveling system available (Notice: Tiles are pushed, not lifted, providing better tile adhesion Improves speed of tile laying)

【300pcs Tile Clips]】 Use on Tiles 1/12" (2mm)up to 1/2"(12mm) thick, No additional assembly tools needed!! extremely fast & easy to install & remove. Can be used for Flooring and Walling

This product is made in China

This product is highly durable

Sturdy Metal Construction With Sharp Blade

1 of Norske Tools Newly Improved NMAP001 13 inch Laminate Flooring and Siding Cutter with Heavy Duty Fixed Aluminum Fence and Built-in Precision Angled Miter Settings

1 of Bullet Tools 711 Ergonomic Tapping Block, 3 x 7 x 3 inches, Black

Cuts 12 in. horizontally, and a 9 in. tile diagonally

Designed to cut Solid Vinyl Tile, Vinyl Composition Tile (VCT), and Cork Tile, up to 1/8 in. thick

Built-in casters for maneuverability

【Why choose us】 With Storystore Leveling System tile installation-great tools for floor/wall setting.The system ensures flatness between tiles avoiding movements during the mortar setting,Saves tile installation time and money with less effort, it is the best gift for professionals and DIYs who want to install the tile of wall and floor

【CONVENIENT & EFFICIENT】Improve tile installation speed and reduce installer fatigue/stress. Virtually lippage free, flat surface drastically. Reduce the need for grinding and polishing. Prevent tiles from moving while curing.

【500pcs Tile Clips】500 Leveling Spacer Clips (wedges and plier are NOT included). Use on Tiles 1/12" (2mm)up to 1/2"(12mm) thick, No additional assembly tools needed!! extremely fast & easy to install & remove. Can be used for Flooring and Walling

★【What You Get:】In this mosaic tools set, it include 1pc wheeled glass mosaic nipper, 1pc tile cutter plier, as well as 10pcs diamond needle grit, total 12pcs are what you need for mosaic tile beginners.

★【High Quality:】The cutter body is made of 55# carbon steel, and the cutting wheel is made of carbide scoring, which are strong and durable for your use. Soft rubber coated handle grips provide the best control, portable size and ergonomic design makes it comfortable to hold and more labor-saving to use.

★【Product Feature:】The tile cutter pliers is 8'' long tool cuts up to 3/8” glass tile. Used for irregular cuts on edges of all tile or stone. wheeled glass nipper with 5/8'' biting surface( straight cutting edges), cuts glass from 1/32" to 1/4" In Thickness. Besides, the two cutter is equipped with resilient spring, makes it more flexible and smooth when use.

Weighs less than 5 pounds and is very light, practical and precise.

It features a rapid positioning button for angle cuts from 0-45°

Capacity Long:- 37 x 37 cm

Tap wheel technology

Assorted colors, color specification not available

Pack of 1 cutter

3" Cutting disc, compact for one hand operation.

Includes 3 cutting discs and 1 grinding disc

19000 RPM

A knee kicker is not a stretcher to remove wrinkles in carpet – it is a positioning tool only.

The teeth are angled forward to help grip and hold the carpet. They are not straight as kicker is not intended to pull or stretch carpet to remove wrinkles.

This tool in non-adjustable, it is best designed for low profile carpets

Twice the power of conventional nippers

Makes irregular cuts on all tile or stone

TPR ergonomic comfort grips

[Fit for Your Tool Kit]: When you need to trim and cut porcelain or tile, depend on the ABN Tile Cutter Hand Tool Ceramic tile Cutter; Use this Manual tile cutter porcelain tile cutter when working on flooring, walls, mosaics, and more

[For Your Project]: Tile cutting tools ceramic cutter allows you to make quick and easy cuts; Use tile cutter tools when it comes to irregular cuts for customizations in tile or stonework

[Built to Last]: Tile manual cutter constructed of chrome vanadium for strength and longevity; No need to worry about tile cutter hand tool ceramic hand tile cutter breaking or bending under the pressure; Designed for extended, repeated use

Ideal for heavy-duty cutting of ceramic tile Porcelain stoneware in general, and in particular, for the frequent Court (BIA) type

Separator monopunto High Performance with 800 kg; maximum power of separation, specially designed for the cutting of high hardness materials and with a maximum thickness of 15 mm

The separator includes the Smart Power by regulating the same power of separation according to the thickness of the tile thickness, using the maximum power in most materials

✅ The range of TS-MAX manual cutters offers professionals a light and functional tool. Ideal for intensive cutting of ceramic tiles, especially for frequent cutting of porcelain tiles (BIa type)

🙋‍♂️ Include a practical and high performance single point breaker with a maximum breaking pressure of 800 kg, which is specially designed for cutting very hard materials with a maximum thickness of 15 mm

🔝 This breaker includes the SMART POWER function by which the breaker itself regulates the breaking pressure depending on the thickness of the tile, thus applying maximum pressure to materials of greater thickness

📐【Newly Popular Cutting Tool】New patent Zozen drywall cutting tool is a safe, accurate, efficient, environmentally foldable gypsum board cutter. Let you be the most eye-catching person in the decoration place.

📐【Meet More Requirements】The blade can be adjusted to adapt to the drywall of different thicknesses to meet the requirements of 1/4inch, 3/8inch, 1/2inch, 5/8inch gypsum boards on the market. The ABS rotary button can be adjusted to meet any size gypsum board with a height of 25 inches/60 cm and below.

📐【Absolutely Safe!】The blade used for cutting can be RESET to ensure that it will not be exposed after resetting, thus ensuring your safety, and we will give you 10 spare blades, and there has storage to store them on the plasterboard cutter place.

Cut materials up to 9 inches in width. Max rake/angle - 45 degrees on 6 inch board. Make cuts up to 9 inch. wide and 9/16 inch. thick

Dust free, quiet operation, no electricity - Cut where you work anytime day or night

One shear blade outlasts 10 or more saw blades