Best C&D Valve in 2026

C&D Valve part number CD3920

Ball Valve Core Removal Tool

Removes a Valve Core from a 1/4 Male Flare Access Fitting Without the Loss of Refrigerant

C&D part number CD5538

Braze-on self-piercing copper saddle valve

For 3/8" tube

INSTALLS IN SECONDS: 3/4 Inch ball water valve requires no special tools, no soldering, no crimping or glue; push-to-connect design provides an efficient application that saves time and money; just push to create a watertight seal

VERSATILE: Shark Bite Ball Valve plumbing fittings fit Copper, PEX, CPVC, PE-RT, and HDPE Pipe and connects them in any combination

PERFORMANCE: SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit

Body material: Brass; Seats: Teflon;

Max. temperature: 200°F;

Non-shock WOG: 600psi;

High quality: Made of lead-free brass, with excellent reliability and strength, suitable for residential applications.

Compatible: Hourleey hot and cold PEX ball valves are compatible with all 1/2" PEX pipes.

Application scenario: Designed for circulating heating and drinking water distribution. Approved to be used underground and behind walls without access panels.

150 PSI at 73 Degrees F

Lead Free - Meets all federal & state standards for lead levels in drinking water system components.

Size is 3/4in

Tankless Water Heater Service Valves

Complete Flow Control: 3/4 inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquatic, hydroponic, or drip irrigation systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow.

Fully Adjustable: Adjust the barb valve anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal 3/4" barb ball valves won't stick like PVC ball valves.

Versatile: Customize a secondary water zone, create individual drip-line control within your drip irrigation system, use as tank valves, drain valves, pex valves, return valves, drip irrigation valve or in any situation where fluid restriction is needed. Also use this 3/4 in. shutoff ball valve for pond water applications, aquarium plumbing, RV camper and trailers, pump return line, canister filter, protein skimmer, calcium reactor, phosban reactor, saltwater applications, aquaponics.

Important: Be sure to check the sizes and buy the right valve. This 16mm valve works with 1/2" drip irrigation tubing from .570 to .620 Inside Diameter (ID). If you would like to use 1/2" tubing that has an ID of .520, then select the 13mm size valve instead. Please note there is no standard sizing for drip irrigation tubing in the USA, so be sure to check the inside diameter of your tubing to select the compatible valve size.

Complete Flow Control: Inline ball valves (2 Pack) for 1/2 and 5/8 inch irrigation tubing are the perfect way to regulate the water flow of your aquatic, hydroponic, or drip irrigation systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow. This 16mm valve works with 1/2" Irrigation Tubing from .570 to .620 ID (Inner Diameter).

Fully Adjustable: Adjust the barb valve anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves.

Important: Be sure to check the sizes and buy the right valve. This 13mm ball valve works with 1/2" tubing with 0.520 Inside Diameter (ID). If you need valves for 1/2" drip irrigation tubing, which has a larger inside diameter 0.570 to 0.620, then select the 16mm size valve.

Complete Flow Control: 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow.

Fully Adjustable: Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves.

For reliable flow control in your natural; manufactured; mixed liquefied petroleum gases and LP gasair applications

UL Listed and CSA Approved 600 psi WOG; 175 psi WSP Temperature 4°F thru 149°F Ends conform to ANSI.B1.20.1

ALUMINUM ALLOY QUARTER TURN HANDLE: allows easy shutoff in your gas lines

APPLICATION - Commercial plumbing, aquariums, reef tank, irrigation, swimming pools, water parks and OEM applications

CONSTRUCTION - SOCKET (GLUE ON ONLY), 2 EPDM O-rings and 2 PTFE seats for long-lasting, superior performance

FULL PORT - Full flow fluid handling characteristics for long-lasting, superior performance in the field.

WATER SHUT OFF VALVE: Brass crimp valves are perfect for helping to control water flow and enabling water supply shut off for servicing and making repairs; includes a vinyl coated steel lever handle

COMPATIBILITY: SharkBite plumbing fittings are compatible with PEX pipes; certified for potable and radiant heating applications

FULL PORT DESIGN: PEX ball valves feature a full port design to allow for maximum flow and minimum pressure drops

APPLICATION - Commercial plumbing, aquariums, reef tank, irrigation, swimming pools, water parks and OEM applications

CONSTRUCTION - SOCKET (GLUE ON ONLY), 2 EPDM O-rings and 2 PTFE seats for long-lasting, superior performance

FULL PORT - Full flow fluid handling characteristics for long-lasting, superior performance in the field.

APPLICATION - Commercial plumbing, aquariums, reef tank, irrigation, swimming pools, water parks and OEM applications

CONSTRUCTION - SOCKET (GLUE ON ONLY), 2 EPDM O-rings and 2 PTFE seats for long-lasting, superior performance

FULL PORT - Full flow fluid handling characteristics for long-lasting, superior performance in the field.

Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 3/8 Inch NPT

Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation

Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F

How To Shut Off Completely: Use the brass material for ball,which will last for a long time and won’t rust/leak. Unlike other products that use iron, this product’s inside sealer material is Teflon, which is much better than normal plastic

Clean Thread: It’s very important for installing, we have one specific quality inspection procedure for this part in the factory

180° Handle: You don’t even need to consider which side you should move it to. Both sides can be closed. You will find it extremely convenient, especially in urgent situations

HIGH QUALITY: Constructed of lead free (DZR) brass for superior reliability and strength

EASY TO USE: Fittings Work with Crimp Ring or Clamp Connection Methods

Barb x barb x barb connection for PEX plumbing systems, Rated to 200°F and 200 PSI

✅MEASUREMENT- The gas ball valve is equipped with a 1/2 inch flare x 1/2 inch female iron pipe (FIP) threaded connection.

✅QUALITY- The straight-flare gas ball valve is constructed of high-impact, durable brass to provide a strong and long-lasting performance. The working pressure is up to 175 PSI. A working temperature range of 32-degrees Fahrenheit to 125-degrees Fahrenheit is recommended for product safety.

✅FUNCTIONALITY- The straight-flare valve is designed for use with liquefied petroleum, LP gas, and air mixtures.

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Red Plastic-covered lever handle for on/off manual control.

The outside thread with sealant for better sealing.

Midline Valve part Number 837Q003

Approved By UPC, NSF

Working Pressure 600 WOG, 150 WSP

Serviceable Valve - Can be taken apart via threads, Female NPT Ports

Handle:Heavy duty handle with blue vinly insulation

Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F

1/4 Inch by 1/4 inch OD tube Ball Valve Quick Connect Fittings,5PCS.

Our Refrigerator Ice Maker Water Line Kit is Made of Food Grade Quick Connect Fittings and NSF Certified Tubing, Which Are Widely Used in RO Systems Water Filter Purification.

SERVICE COMMITMENT】 For Your 100% Satisfaction 30-Day Refund Back Guarantee, 2-YEARS Quality Warranty. We Have Always Been Paying Attention the Quality of Our Refrigerater/Ice Maker line kit. Feel Free to Contact Us at Any Time If You Have Any Dissatisfaction.

Serviceable Valve - Can be taken apart via threads, 1/2 Inch Male x Female NPT Ports

Handle:Heavy duty handle with blue vinly insulation

Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F

Serviceable Valve - Can be taken apart via threads, Female NPT Ports

Handle:Heavy duty handle with blue vinly insulation

Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F

Serviceable Valve - Can be taken apart via threads, Female NPT Ports

Handle:Heavy duty handle with blue vinly insulation

Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F

Material: 316 Stainless steel.

Size: 1/2" Male x 1/2" Female

Double-seal system allows flow to go in either direction, heavy duty Aluminum Alloy handles.

NPT Female&Male threads for connecting to male threaded pipe fittings

SUS316 body and ball for extra strength and corrosion resistance

Inline valve for connecting two pipes going in the same direction with Double-seal system

Gas Ball Valve with 1 Inch FIP x 1 Inch FIP for Gas Connectors

Large Wrench Flats Allow for Quick and Easy Installation; 100% Factory Leak Tested

Quarter-Turn Lever Handle; Brass Construction

Gas Ball Valve with 3/4 Inch FIP x 3/4 Inch FIP for Gas Connectors

Large Wrench Flats Allow for Quick and Easy Installation; 100% Factory Leak Tested

Quarter-Turn Lever Handle; Brass Construction