Best Chromlives in 2026

This Universal Handle Grip features 1/4" screw on top. Easily mounted to any dslr camera,LED video light, GoPro, smart phones and more!

Compatible with any devices with 1/4" thread hole, such as add to a ball head mount to acheive 360 degree rotation, gopro tripod mount, smallphone mount, and so on.

Superb metal construction body with durable rubber on surface.Anti-slip and ergonomic design, very comfortable to use.

18mm Eyecup for Canon EOS and Canon Digital Rebel to prevent light entry due to BShutter/bulb shutter long exposure.A great accessory for all photographers.

Replacement Eyecup compatible with Canon EOS 300D 350D 400D 450D 500D 550D 600D 1000D/1100D/700D/100D CANON Digital Rebel XT XTi XS XSi T1i T2 T2i T3 T3i T4i T5i SL1.

Provides protection for canon camera eyepiece and keep the camera viewfinder away from dust.

Light Stand Bracket, Cold Shoe Mount with Umbrella Holder.

Cold Shoe Flash Bracket- Universal cold shoe mount on top for most DSLR Camera Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light. (Note:this adapter does not fit Sony and Minolta flash)

Umbrella Mount Bracket- A hole design for mounting urbrella. 180° Swivel joint allow vertical adjustment of the umbrella and flash light.

Package Included -2Pack Rubber camera Eyecup for Sony +2Pack Camera Hot Shoe Cover for Sony ; Having this accessory to provide better protection for your camera!

Soft Silicone Eye Cup -Compatible with Sony A9, A99 II,A7, A7 II, A7 III, A7R, A7R II, A7R III, A7R IV, A7S, A7S II and A58 camera. Spare or replacement eyepiece of Sony FDA-EP18.

Eyepiece for Sony -Durable silicone rubber design,comfortable to wear and strong wear resistance. With this eyepiece to protect your viewfinder from dust,moisture,scratches,dust and block unwanted light during use.

10Pack Microphone Windsreen Cover - 2.9 x2.3 inches with Caliber Size is 1.4 inches, compatible with most standard handheld microphones in market. (Note-Not for Headset Mic)

Higher Density Microphone Cover- Thick and soft foam covers, Better protect your microphone from wind interference and other noises even in strong wind condition. Suitable for indoor activity like ktv, dance ball, conference room, news interviews, stage performance and outdoor activity like news report, sports.

10 Different Colors- Black,Red,Deep Red,Yellow, Purple, Midnight Blue,Aquamarine Blue,Rose Red,Grey,Orange.Easliy differentiate each microphone by using these microphone covers. Each microphone windscreen cover is packed seperately in a plastic bag so the color do not bled.

Professional Deadcat Microphone Cover suitable for shotgun mics with a maximum slot length of 180mm (7.1") and a diameter of 18-24mm,such as compatible with Sennheiser MKH416 MKH 418 ME66 K6 ME80 K3U, Rode NTG3 NTG2 NTG1, Sony ECM 680s ECM-670 ECM-678 and AKG C568EB CK 68 ULS C4608 Red.

Artificial Fur Wind Shield for Rode NTG3 NTG2 NTG1 mic is designed to minimize any wind noise, blocks out plosives, while maintaining acoustic transparency when recording in high wind conditions.Please check the size suitable for your mic or not before order.

The Double-Layer Pop Filter Compatible with Sennheiser microphone combines an open foam surround and a layer of soundproof faux fur to effectively reduce noise. The rubber base prevents any wind noise from entering the rear of the microphone pickup area.

Furry Microphone Windscreen Muff Microphone Wind Plush Sleeve designed for Recorder Zoom H5 H6

Reduces Wind Noise - The microphone muff helps to reduce wind interference and other noises, suitable for indoor or outdoor use.

Minimizes Noise and Ambiance - The wind muff cover can be scratchy. But the furry models are silent if you pick up the recorder or handle it in any way with the cover. It can prevent the tarnish, dust, debris, pollen falling on the surface of the mic and keep the microphone in a good condition.

【Combo 26 Pcs Tripod Adapter】 1/4" to 3/8" reducer bushing screws(10PCS); 1/4" to 3/8" male to male screws(3PCS); 1/4" to 1/4" male to male screws(3PCS); 1/4" female to 3/8" female camera spigot screws(3PCS); 1/4" D Shaft D-ring quick release screws(2PCS); 3/8" male to 1/4" female brass screw(1PCS); 1/4" male to 3/8" female brass screw(1PCS); 1/4" to 3/8" male to male spigot stud screw(1PCS); 1/4" female to cold shoe adapter(1PCS); 1/4" male to hot shoe mount(1PCS).

【Muti-Function】Tripod Screw Adapter Kit can be attached to a wide range of different photography and help with getting everything setup. Suitable for most dslr camera, ballhead, quick release plate, monitors, tripod, monopod, flash light stand, shoulder rig, trail camera accessories and more.

【Durable Material】 Most of the 1/4"-20 tripod camera mounts are made of aluminum alloy,solid and durable. 2 PCS 3/8" male to 1/4" female screw are made of brass, anti-rust and solid. Great set to have for attachments for camera rigs.

Combo Pack: 22 Pcs Camera Screw Adapter - 5X 1/4" to 3/8" Reducer Bushing Screws; 5X 1/4" Male to 3/8" Male Screws; 5X 1/4" Male to 1/4" Male Screws; 5X Camera Spigot Screws; 2X 1/4" Hot Shoe Mount.

Widely Application: These 1/4 inch camera screw adapters can be mounted on a wide range of different photography. The converter mount screws meet the most of your camera devices and other accessories and save your time for searching!

Hot Shoe Adapter: Made of anodized aluminum metal, the bottom of hot shoe connects to the dslr/slr camera hot shoe, the top part of it is a standard 1/4-20 tripod threaded spud. It permits any devices with standard 1/4" screw hole to be installed on a flash hot shoe slot.

Combo Pack Professional Windscreen Compatible with Zoom H1--Furry windscreen + Foam windscreen. Specially designed to compatible with Zoom H1 H1n Apogee microphone and more.

Noise Cancellation and Wind Reduction: The Microphone Windscreen is designed for filtering the noise to get a clear record indoor&outdoor, keeping unwanted noises from interference. So it is perfect for voiceovers, interviews, field recordings.

Perfect Protection Solution Compatible with Zoom H1, H1n: With dense fur or foam, the wind cover can protect your recorders completely from debri, paint, sweat, and other filth, making your microphone always safe from Scratching, moisture, damage so on.

Furry Microphone Windscreen Muff Microphone Wind Plush Sleeve for Recorder Zoom H1 and other mic with size 2.5"X 40mm (L x D)

Reduces Wind Noise - The microphone muff helps to reduce wind interference and other noises, suitable for indoor or outdoor use.

Minimizes Noise and Ambiance - The furry windscreen can be scratchy. But the furry models are silent if you pick up the recorder or handle it in any way with the cover. It can prevent the tarnish, dust, debris, pollen falling on the surface of the mic and keep the microphone in a good quality.

Combo 2Pack Microphone Furry Windscreen Muff Foam Cover for Blue Yeti +Microphone Pop Filter: These eficiently help to reduce the plosive, wind noise interference, tarnish, dust, debris, saliva spraying during your recording or broadcasting, ensuring a high quality recording.

Artificial Wind Muff for Blue Yeti:Furry wind screen for blue yeti with dense fur to eliminate wind noise and other noise interference when recording outdoor. With updated elastic loop strap to ensure air-tight inner environment for BETTER recording!! Perfect for outdoor use or in adverse environment.

Thicker Foam for Blue Yeti: Microphone cover for blue yeti helps improve recording quality by blocking out unwanted wind and noises, protecting your microphone from debri, dust and saliva. Perfect for indoor use.

The ChromLives camera lens cap is a great photography rig to protect the front portions of your camera camcorder lens from water, dust, and scratches.

52MM LENS CAP- This is 52mm lens cap with lens cap leash Hole for ALL Lenses with a 52mm Filter Thread Front manual or autofocus, digital or film.Also attaches to filters, adapters, and lenses with or without hoods. CHECK YOUR LENS DIAMETER BEFORE PURCHASE. Your camera's lens thread size will usually be marked on the lens barrel /UV lens filter barrel or printed underneath your lens cap. Ø52 = 52mm lens thread size.

LENS CAP LEASH HOLE- A hole on lens cap for lens cap leash to prevent losses while still keeps the lens 100% sealed when mounted.

Dual Camera Mount with 1/4" standard screw hole to mount on tripod.

The straight flash bracket is with dual 1/4" Screws to support two cameras,flash units or mics at the same time.

Dimensions: 10.6 x 1.2 x 0.2 inches (LXWXH), Max Loading Capacity: 6.6LB (3kg).

【Easy to Carry and Use】- No need for clamp on the table,foldable and portable design, much lighter than normal tripod, only 1.5 lb. Design for the small project overhead shooting,like still life shooting, document shooting, video recording and live broadcast.

【Wide Compatibility】- Phone clamp fits most smartphones in market from 2.3" To 3.4" In width;landscape (horizontal) or portrait (vertical) can be adjusted.Phone holder with rubber pad prevent the phone from scratching.

【Stable Design】- Phone video stand parts are firmly connected by metal fasteners. Thickened gooseneck rod and cast iron made base ensure to support steadily support cell phones, ring lights,etc;Sturdy base with skid reduction pad won’t easy to slide on the table.

【Overhead Camera Mount With Ring Light】The overhead phone mount is equipped with an led light allows you get the best lighting for any shot for Video Recording,YouTube,TikTok,live streaming,home studio and broadcasting. Both the tripod head and clip arm head are universal 1/4 threaded, compatible with iPhone,camera and Logitech webcam Brio 4K, C930e, C920, C920s, C922, C922x, C615 etc; You can combine them according to your shooting needs.

【Adjustable Color and Brightness】The 6-inch usb powered led light has 3 modes ( white, natural, warm light) and 10 adjustable brightness(brightness adjustment from 10%-100%), which eliminates the worry about the battery and can be powered by charging bank, wall charger, laptop, etc. The flexible gooseneck ring light can be adjusted 360 degrees to provide appropriate but sufficient lighting for different occasions.

【Stable Arm Phone Stand for Recording】The 360-degree rotating ball head and flexible scissor arm with adjustable screws allow you to adjust to any position and height, 180°up and down or 135°forward and backward to reach the most comfortable viewing position. Double-braced arms with suspension springs on each boom arm more sturdy and durable without shaking or dropping.

Cellphone Spring Clip Holder - with a Cellphone Spring Clip Holder this Photo Copy Stand compatible for cellphone with width of 6-10cm (basically for all cellphones)

Adjustable Height & Angel - Mini Tripod is adjustable. Its shrink height: 8 in / 20 cm and extension height 16 in / 40 cm. Its photography angle from 30° to 90° (Note: The tilt angle is related to the weight of the phone, the phone more heavier, the tilt angle of the phone will be more smaller )

Stable - Large legs with skid reduction can increase the stability, ensure the safety of your smart phone

Overhead Phone Video Stand - Phone suspensiopn stand scissor arm comes with phone clip and ball head camera mount fitting well cell phone, video, live stream, baking, crafting and other devices with 1/4 threading hole.

Scissor Arm Phone Mount- Double-braced arms with suspension springs on each boom arm more sturdy and durable without shaking or dropping; the flexible scissor arms with adjustable screws allow you adjust to any position and height to show image.

1/4” standard screw hole phone clip holder with sponge mat and serrated anti-slip rubber pad prevent your cell phone from tilting and falling. 1/4” head ball with 360 degree rotation provides your different angles. You can adjust the ball head to meet your need easily.

Equipped with movable 1/4” screw and detachable shoe mount. Built-in 1/4” threaded hole for tripod, light stand, handle grip and other support.

Dual hot shoe mount -Perfect for mounting two flashes and other SMALL light and mic at the same time.

Adjustable Range-From 2.95 to 3.33 inch.(Please check the max adjustable range for your camera or accessories before order).

This is a heavy duty photography video camera L bracket with dual flash cold shoe mounts,1/4” thread hole on top,and 1/4” tripod screw on base plate for any standard camera or camcorder.This camera L bracket allows you to attach a light source to the hot shoe, which sets the light source away from the camera. This helps reduce red eye and reduce harsh shadows.

REMOVABLE COLD SHOES-This L bracket is updated with two solid removable flash shoe mounts for added light source, Far exceeds the built-in shoe mount version which will risk your delicate flash/monitor to slide off. Provides an economical way to do both horizontal and vertical flash.

UNIVERSAL 1/4” SCREW- Updated with an extra 1/4” screw hole between the two cold shoe mount for more configuration. Comes with a 1/4”-20 thumb screw to connect your camera camcorder,action camera etc,. 1/4” threaded hole on the bottom of the thumb screw; 1/4” threaded hole on the base plate; to mount on a tripod,monopod and more.

Come with a 1/4" camera handle grip, camera wrist strap,and a 1/4"-20 neck strap screw holder. You can connect the handle with the wrist strap via the neck strap screw holder.

This Universal Handle Grip features 1/4" screw on top. Easily mounted to any dslr camera,LED video light, GoPro, smart phones and more!

The camera handle is compatible with any devices with 1/4" thread hole, such as add to a ball head mount to acheive 360 degree rotation, gopro tripod mount, smallphone mount, and so on.

【Furry + Foam Windscreen Mic Cover】- Professional pop filter designed to compatible with at2020 at2035 at2500 at2050 at4040,audio technica mic.

【Wind Noise Reduction】- The Microphone Windscreen is designed for filtering the noise to get a clear record indoor&outdoor, keeping unwanted noises from interference.perfect for voiceovers, interviews, field recordings,conference calls, online games,etc.

【Artificial Furry Muff】- This wind cover muff is with adequate soft furry that help reduce wind noise interference when recording outdoor,providing a high quality record.Updated with smooth elastic loop strap to ensure air-tight inner environment for better recording.

This white balance card with matte finish to prevent scratch, is non reflective and waterproof. Ideal for getting your white balance right in seconds and always have the perfect exposure.

Neutral 18% exposure grey card is better designed for DSLR, Video, Film and Photography.

The white grey card photography perfect for balance color when shooting. Convenient to carry out with a landyard.

ChromLives Lens cap keeper is a great accessory for all photographers.It fastens to lens cap with adhesive to prevent your lens cap from getting lost.

Designed for virtually all SLR camera lens caps and video cameraslens caps, with or without a hole/loop available.

Elastic loop fit for various sizes of lens and stretches to wrap perfectly around the lens.

Cold Shoe Bracket Extension Bar- Ideal for Vloggers and Content Creators! This cold shoe bracket is a perfect solution to mount your microphone on Sony A6400 6300 6500 6000, Canon G7 X , Nikon Small Vlog Cameras, etc. And to mount your led video light on Gimbal Zhiyun Smooth 4 DJI Osmo Pocket and more.

Camera Tripod Bracket- Standard cold shoe type allows to attach additional microphone or small led video light, necessary for vlogging. Cold shoe mount extends to prevent obstruction to the flip-up screen of the mirrorless camera.

1/4”-20 Tripod Screw- Universal 1/4” screw on top for mounting on small camera, osmo pocket (tripod adapter required), zhiyun gimbal and other devices with 1/4” screw hole. With 1/4” threaded hole on bottom for mounting on tripod.

Light Stand Bracket, Dual Cold Shoe Mount Extension Bar with Umbrella Holder.

Dual Flash Shoe Bracket- With double cold shoe mount on an Extension bar. Universal cold shoe mount for most DSLR Camera Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light. (Note:this adapter does not fit Sony and Minolta flash)

Umbrella Mount Bracket- A hole design for mounting urbrella. 180° Swivel joint allow vertical adjustment of the umbrella and flash light.

【Multifunctional Handle Grip】 -This is a cell phone handlegrip with cold shoe mount on top. Also work as a camera handlegrip; 1/4 inch threaded screw hole on top and bottom, can support phone clamp, DSLR camera,LED video light,gopro etc,. and easily mounted to a tripod,monopod and any devices with 1/4" screw.

【Adjustable Phone Clamp】 - Phone clamp fits most smartphones in market from 2.28" to 3.94" in width; 360 Rotation, switch the knob to achieve landscape (horizontal) composition to portrait (vertical).The fixed locking knob and rubber pad design help firmly hold your phone and prevent it from scratching.

【Cold Shoe Mount Design】- With extra built-in cold shoe Mount on top of the phone clip, you can mount a microphone or flash light to get a better video recording performance. It’s a great choice for video recording with this cell phone stabilizer! (when you mount a flash light,you need to add flash light adapter.)

18mm Eyecup design for Canon to prevent light entry due to bulb shutter long exposure.A great accessory for all photographers.

Compatible with Canon EOS 80D 70D 60D 77D 50D Mark II 6D 6D Mark II 40D 30D 20D 20Da 10D 60Da A2 A2E D30 D60.

Provides protection for the camera eyepiece and keep the camera viewfinder away from dust.

Updated Version Flash Bracket- Swivel Light Stand Bracket, Standard Flash Cold Shoe Mount with Photography Umbrella Holder. Updated Parts: Cold Shoe, Metal Locking Wheel.

Cold Shoe Bracket- Updated shoe mount on top to catch your flash speedlite without falling off! Universal cold shoe mount for most DSLR Camera flashes speedlite light Nikon Canon Panasonic Yongnuo Neewer Godox flashes and more. It also works on monitor,ring light, video LED light, studio light,and other flashes rigs that come with a camera shoe type.

Light Stand Bracket- Comes with a 1/4 inch to 3/8 inch screw spigot, which can be converted by yourself, allow the light stand bracket to attach to a tripod or light stand. Note:You will received the flash bracket with the convert screw. Release the screw to get 1/4” thread or 3/8” thread.

Universal Lengthen Hot Shoe Extension Bracket- Works as an extension bar mount to attach two rigs at the same time. It attaches LED lights, microphones, monitors, flash, strobe etc, to your dslr camera,DV, smart phone holder, gimbal stabilizer and any camera rigs with 1/4” screw hole or hot shoe bracket.

Dual Cold Shoe Mount- 1x integrated cold shoe mount; 1x length adjustable cold shoe mount. Adjustable range: 3-3.5”. International Standard cold shoe mount compatible.Ideal for mounting monitor, on-camera lights, microphone shock mounts, flashes, hot shoe accessories,etc,

Standard 1/4” Tripod Screws- Three 1/4” threaded holes for tripod, light stand, handle grip and other support. Can directly attach this hot shoe extension bar to a tripod via 1/4” tripod screw hole.