Best Classacustoms in 2026

Off-grid travelers and small-scale food vendors absolutely require this heavy-duty storage solution to maintain water independence. The Class A Customs T-5500 is a versatile workhorse, manufactured in Elkhart, Indiana, using NSF-approved materials that make it completely safe for drinking water. Its flexible design is a standout, allowing you to rotate the tank on any side to fit your specific spatial constraints in an RV or pop-up camper. Just remember that this is a non-pressurized unit. You'll need to use a gravity-fed method like a fill dish rather than a pressurized garden hose to avoid damage. It arrives clean and ready for installation, featuring built-in NPT fittings that make integrating it into your existing plumbing system straightforward and efficient.

The classAcustoms 14-inch RV roof vent provides a straightforward, reliable solution for campers who prefer manual airflow control over complex electrical setups. This non-powered wedge-style dome is constructed from durable white polypropylene, making it a lightweight yet sturdy addition to your rig. I found the manual crank mechanism incredibly intuitive, and the easily removable screen makes cleaning out dust and debris a breeze. Just a heads-up for the DIY crowd: you will need to provide your own mounting hardware, screws, and putty to complete the installation. Also, be extremely careful when handling the galvanized mounting flange, as the edges are quite sharp. It is a solid, no-frills component for anyone looking to refresh their ventilation without adding unnecessary power consumption.

After weeks of monitoring seasonal leaks and worrying about moisture intrusion, finally tackling a roof replacement feels like a massive weight off your shoulders. This classAcustoms kit is a comprehensive solution that takes the guesswork out of a major RV maintenance project by providing exactly what you need in one package. You get a massive 35-foot stretch of TPO material alongside two gallons of water-based adhesive, four rolls of putty tape, and five tubes of specialized self-leveling silicone. Just a professional tip: since this arrives folded in a box, you must unpack it immediately and let it lay flat for several hours to relax those creases before you attempt your installation. It is a heavy-duty, all-in-one overhaul for your camper's protection.

This Classs A Customs TPO repair kit provides a comprehensive, all-in-one solution for anyone needing to resurface a damaged camper roof with professional-grade materials. Instead of hunting down individual components, you get a high-quality 32 mil single-ply white membrane paired with everything necessary for a successful install, including a gallon of water-based acrylic adhesive, two rolls of gray putty tape, and two tubes of Heng's self-leveling silicone caulk. The kit is designed for convenience, though you need to be ready to work quickly. The membrane ships folded and should be moved directly from the box to a clean roof to avoid debris. Because the adhesive is fast-drying and the membrane is best applied in temperatures above 50 degrees, this is a perfect choice for a focused weekend maintenance project.

The cool, brushed texture of the 300 series stainless steel immediately signals a level of durability essential for tight living quarters. This Class A Customs sink is a specialized solution designed specifically for the footprint of an RV, camper, or concession stand where every inch of counter space is precious. With a 9-inch inner bowl depth of 4 inches, it manages to balance a compact 10 5/8-inch outer diameter with enough utility to handle quick rinses or food prep. The 22-gauge construction provides a sturdy feel that avoids the flimsy sensation often found in lightweight mobile appliances. Just keep in mind that you will need to source your own 2-inch drain opening to complete the installation, but for a dedicated small-space upgrade, the precision of the 7/8-inch flange makes for a clean, professional fit.

The Class A Customs RV Water Tank Combo Pack stands out for its uncompromising commitment to safety through NSF-certified construction. After testing these tanks, the most impressive aspect is the use of UV-8 stabilized Medium Density Polyethylene for every single component, including the fittings, which ensures long-term durability against sun exposure. The kit provides a versatile setup with a 5-gallon tank measuring 17.5 by 9.75 inches and a larger 7-gallon tank at 23.75 inches long. You will find three 1/2" female NPT fittings on each tank that are ready to go, while the 1 1/2" female NPT fittings come with a protective membrane that you'll need to cut out during installation. It is a robust, professional-grade solution for managing your mobile water needs.

This Class A Customs oval sink stands as a top-tier solution for anyone rebuilding a compact RV or a small concession stand. Built from durable 22-gauge 300 series stainless steel, it offers a ruggedness that is essential for mobile environments where space is at a premium. The 13 1/2" x 10 3/4" footprint is incredibly efficient, yet the 5 1/4" depth ensures you aren't constantly splashing water during use. I particularly like the 7/8" flange width, which provides a clean, professional finish around the edge of your countertop. Just keep in mind that you will need to source your own 1.5" bar sink drain separately, but for a high-quality, heavy-duty installation, this unit is an excellent foundation.

The classAcustoms Sure-Flex PVC RV Rubber Roof Kit provides a massive, all-in-one solution for anyone facing a major roofing overhaul. This 28mil thick single-ply membrane is impressively smooth on both sides, ensuring a clean, professional finish once it's laid down. What makes this kit a standout is that it isn't just a roll of material. It's a complete ecosystem including two gallons of fast-drying acrylic adhesive, five tubes of self-leveling silicone caulk, and four rolls of pliable putty tape. Because the membrane ships folded, you’ll want to get it onto a clean roof immediately to avoid any debris or sharp objects. It is a heavy-duty, comprehensive package designed to handle the curves and contours of your RV roof with ease.

Most RV owners dread roof repairs because the logistics of sourcing compatible materials are a nightmare, but this all-in-one kit eliminates that guesswork entirely. The 32 mil thick white TPO membrane is substantial enough to handle the elements, featuring smooth and frosted sides for a professional finish. I love that it includes everything from the water-based acrylic adhesive to the specialized Heng's self-leveling silicone caulk and gray putty tape. Just a heads-up: because this arrives folded, you absolutely must unpack it and let it relax flat for several hours before you start your project to smooth out any creases. It is much smarter to have this extra coverage than to realize mid-install that your roof's curves require more material than you initially measured.

Limited water capacity during off-grid camping or mobile vending can bring operations to a screeching halt. The T-5000 by Class A Customs solves this by providing a versatile 50-gallon reservoir that works equally well for fresh drinking water or gray water storage. Because it is manufactured from NSF-approved materials right in Elkhart, Indiana, you can trust its safety for potable use. The design is surprisingly flexible, allowing you to rotate the tank on any side to fit your specific footprint. Just remember that this is a non-pressurized unit. You'll need to use a gravity-fed method like a fill dish rather than a pressurized garden hose to avoid damage. It is a rugged, American-made solution for RVs, concession trailers, and portable sinks.

Most RV owners assume a roof repair is just about the membrane, but the real secret to a leak-free life is the adhesive and sealant coordination. This Class A Customs kit takes the guesswork out of a massive overhaul by bundling a 32 mil thick EPDM membrane with everything needed for a professional-grade seal. You get two gallons of water-based acrylic adhesive, five tubes of self-leveling silicone, and four rolls of pliable gray putty tape. One crucial tip for a smooth finish: since this kit ships folded, you must unpack it and let it relax flat for several hours to iron out creases before you start installing. It is a comprehensive, all-in-one solution for anyone tackling a large-scale camper or trailer roof replacement.

You might hesitate to trust a DIY roofing kit with your entire camper's protection, but this Class A Customs EPDM kit simplifies a massive job by providing everything needed in one go. The 32 mil thick membrane features a smart dual-sided design with smooth and textured surfaces to ensure a proper fit over your unit's specific contours. Because it ships folded, you must unbox it immediately and let it relax flat for several hours to smooth out any temporary creases before installation. Having the water-based acrylic adhesive, gray putty tape, and four tubes of self-leveling silicone included makes the repair process much less stressful. It is a comprehensive solution for anyone looking to secure their roof with a durable, white single-ply membrane.

You are standing on a ladder in the midday sun, staring at a cracked, weathered RV roof and realizing a full replacement is the only way to prevent a total interior disaster. This Class A Customs kit provides everything needed to tackle that massive job in one go, featuring a 32 mil thick EPDM membrane that offers both smooth and textured sides for a professional finish. The inclusion of a gallon of water-based acrylic adhesive, four tubes of self-leveling silicone, and two rolls of gray putty tape means you won't be running back to the store mid-project. Just remember to unbox the membrane immediately upon arrival. Laying it flat to relax for several hours is essential to smooth out any temporary creases from shipping before you begin your installation.

Most RV owners settle for messy, patchwork leak repairs when they should be opting for a professional-grade, seamless membrane replacement. This Class A Customs kit provides everything required for a comprehensive overhaul, centered around a durable 32 mil thick EPDM membrane. I really like that the kit isn't just the rubber itself. It includes a full gallon of water-based acrylic adhesive, two rolls of pliable gray putty tape, and two tubes of self-leveling silicone caulk. The membrane features a smart dual-texture design with smooth and patterned sides, allowing for versatile installation. Just remember to keep that membrane clean and off the ground once you unbox it, and try to time your project for days when temperatures stay above 50 degrees for the best results.

The Class A Customs PVC Extreme Duty RV Rubber Roof Kit provides a comprehensive, all-in-one solution for anyone facing a major motorhome roof restoration. This massive 8.5 by 30-foot single-ply membrane is a heavy-duty lifesaver that eliminates the headache of sourcing individual components for a large-scale repair. I love that it arrives as a complete ecosystem, including two gallons of water-based acrylic adhesive, four rolls of butyl tape, and five tubes of Heng's self-leveling silicone caulk. It is a serious professional-grade kit, though you need to be ready to work fast. The adhesive dries quickly and you must install the membrane onto a clean roof immediately upon unboxing to avoid any contamination or damage. When the temperature is above 50 degrees, this kit makes a massive job feel manageable.

Securing a heavy toy hauler ramp door becomes a much less stressful task once you swap out flimsy hardware for this robust cam bar system. I tested this 45-inch black plated lock, and the tactile feedback from the rubber grip handle makes a noticeable difference when you're working in a hurry or in less-than-ideal weather. It’s a versatile piece of hardware because you can mount it on either the left or right side depending on your specific trailer configuration. While you will need to source your own mounting hardware and a padlock to complete the setup, the included lockable hasp provides a solid foundation for securing your gear. It feels like a professional-grade upgrade that brings much-needed stability to any folding ramp door.

After weeks of testing various storage solutions for my off-road setup, this 41-gallon tank from Class A Customs has proven to be a versatile workhorse. What sets it apart is the NSF-approved material, making it completely safe for drinking water or standard gray water storage. The build quality feels substantial, and since it is manufactured in Elkhart, Indiana, you can tell there is an emphasis on American-made durability. I found the ability to rotate the tank to fit different height or width requirements incredibly helpful for tight spaces in my camper. Just remember that this is a non-pressurized unit. You’ll need to use a gravity fill method rather than a direct garden hose connection to avoid any pressure issues. It is a reliable, heavy-duty option for anyone needing extra capacity on the road.

Setting up a remote campsite or managing a food vendor stall becomes much easier when you aren't constantly worrying about your water supply. This Class A Customs combo pack provides a massive boost to your capacity with a 55-gallon and a 75-gallon tank, making it versatile enough for everything from off-road vehicles to concession trailers. Because they are manufactured in the USA using BPA-free, NSF-approved materials, you can trust these for fresh drinking water or gray water storage. The design is clever, allowing you to rotate the tanks to fit your specific height or width requirements. Just remember that these are non-pressurized units. You'll need to use a gravity fill method rather than a pressurized garden hose to avoid damaging the system. It is a rugged, reliable solution for anyone needing extra liquid storage on the go.

Why settle for a patchwork repair when you can resurface your entire RV roof with one professional-grade solution? This Class A Customs TPO kit is a massive, all-in-one overhaul package designed to stop leaks and revitalize your camper's exterior. It isn't just a roll of rubber. You get five tubes of Heng's self-leveling silicone, four rolls of putty tape, and two gallons of water-based acrylic adhesive to ensure a seamless bond. Just a heads-up for your installation day: this kit ships folded in a box, so you need to unpack it immediately and let it lay flat for several hours to relax those creases. Once it settles, you have everything required for a high-quality, watertight finish.

After weeks of monitoring the weather, I finally felt confident enough to tackle my motorhome's aging roof with this Class A Customs PVC kit. This isn't just a single sheet of membrane. It is a comprehensive overhaul system that includes everything from Heng's self-leveling silicone caulk to two rolls of heavy-duty butyl tape. The single-ply PVC membrane is substantial, though you have to be meticulous during installation—unfolding it directly onto a clean roof to avoid any contact with the ground or sharp objects is vital. The included water-based acrylic adhesive dries quickly, making the application process much more manageable if you time it when temperatures are above 50 degrees. It turns a daunting repair into a professional-grade DIY project.

You are standing on a ladder under a punishing midday sun, staring at a cracked, leaking camper roof and realizing that a patch job won't cut it this season. This Class A Customs TPO kit provides a professional-grade solution by bundling a heavy-duty 32 mil single-ply membrane with every essential sealant you actually need. Instead of running to the hardware store mid-project, you have the specialized white acrylic adhesive, gray putty tape, and Heng's self-leveling silicone right in the box. The frosted sides of the membrane make handling much easier, though you have to be careful to move it from the box directly to the roof to avoid contamination. It is a comprehensive, all-in-one overhaul kit that turns a daunting repair into a manageable weekend task.

Most RV owners patch up leaks with temporary fixes that eventually fail, but this Class A Customs TPO kit offers a professional-grade permanent solution for your camper's roof. Instead of hunting down individual supplies, you get a complete ecosystem including a massive 25-foot roll of TPO, specialized acrylic water-based adhesive, and two rolls of putty tape. It even includes four tubes of Heng's self-leveling silicone caulk to seal the edges perfectly. Just a heads-up for the DIYer: the material ships folded in a box. To avoid permanent creases, you need to unpack it immediately and let it lay flat to relax for several hours before you start your installation. It is a massive, all-in-one overhaul for anyone serious about waterproofing their rig.

RV owners facing aging, leaky roofs need the classAcustoms Sure-Flex PVC Kit to prevent costly structural damage before the next storm hits. This comprehensive bundle takes the guesswork out of a major repair by providing a heavy-duty 28mils thick white membrane alongside everything required for a professional-grade seal. You get a full gallon of fast-drying acrylic adhesive, two rolls of pliable gray putty tape, and four tubes of self-leveling silicone caulk to ensure every seam is watertight. Because the membrane arrives folded, you must work quickly to get it onto a clean roof, but the included materials make the process manageable. It is a smart move to use this slightly oversized kit to account for roof curves, as trimming excess is far safer than running short mid-installation.

The Class A Customs EPDM Kit is the definitive all-in-one solution for RV owners facing significant roof damage or full membrane replacements. This comprehensive bundle eliminates the guesswork by providing a 32 mil thick, white single-ply membrane alongside essential installation components like two gallons of water-based acrylic adhesive and five tubes of self-leveling silicone caulk. I particularly appreciate the inclusion of four rolls of gray, non-hardening putty tape to ensure a tight seal. One pro tip for anyone ordering this: the membrane ships folded, so you must unpack it immediately and let it lay flat for several hours to relax those creases before you attempt to install it. It is a heavy-duty, professional-grade setup that ensures you won't run short on material during a complex installation.

The sheer scale of this TPO roll is enough to make any RV owner feel a sense of relief during a major roof overhaul. Instead of hunting down individual components, this kit delivers a comprehensive solution that includes 15 feet of high-quality rubber membrane alongside everything needed for a professional-grade seal. You get four tubes of self-leveling silicone caulk, two rolls of putty tape, and a full gallon of water-based acrylic adhesive right in the box. Just a heads-up for your installation day: the material arrives folded in a box, so you must unpack it and let it lay flat for several hours to relax those creases before you start gluing. It is a massive, all-in-one toolkit for restoring your camper's weatherproofing.

This Class A Customs EPDM kit provides a comprehensive, all-in-one solution for anyone facing a major RV roofing overhaul. Instead of hunting down individual components, you get a massive 32-mil thick membrane paired with essential adhesives and sealants in one package. The white EPDM membrane features both smooth and textured sides, ensuring a professional finish across your camper or trailer. I particularly like that it includes five tubes of self-leveling silicone and two gallons of water-based acrylic adhesive, which takes the guesswork out of the installation process. Just a pro tip: since this ships folded, you must unroll it and let it relax for several hours to smooth out those temporary creases before you start laying it down. It is a heavy-duty, thoughtful kit that covers every corner of your roof repair.

Any RV owner facing a leaking roof needs this comprehensive EPDM kit to avoid a catastrophic interior overhaul. This isn't just a roll of rubber. It is a complete restoration system featuring a 32 mil thick membrane that balances smooth and textured sides for better grip and durability. I love that it includes everything from a gallon of water-based acrylic adhesive to four tubes of self-leveling silicone caulk and two rolls of gray putty tape. Just a heads-up: since this ships folded, you must unpack it immediately and let it relax flat for several hours to smooth out any creases before you start your installation. It provides a professional-grade seal that covers those tricky curves and raised areas with ease.

Is there anything more stressful for an RV owner than discovering a leak in the roof membrane? This Class A Customs EPDM kit provides a comprehensive, all-in-one solution to take the guesswork out of a major roof replacement. The 32 mil thick white membrane is substantial, featuring both smooth and textured sides to ensure a professional finish. Because it ships folded, you really need to unbox it and let it relax flat for several hours to smooth out any temporary creases before you start your project. The inclusion of two gallons of water-based acrylic adhesive, five tubes of self-leveling silicone, and four rolls of gray putty tape means you won't be running back to the store mid-installation. It is a massive, heavy-duty kit designed to protect your camper for the long haul.

The brilliant white surface of this 32-mil EPDM membrane immediately catches the eye, promising a massive reduction in solar heat absorption for your camper. This comprehensive kit takes the guesswork out of a major roof overhaul by bundling everything from a gallon of water-based acrylic adhesive to four tubes of self-leveling silicone caulk. You also get two rolls of pliable, non-hardening gray putty tape to ensure a watertight seal. Because the membrane ships folded to save space, you must unpack it and let it relax flat for several hours to smooth out any temporary creases before you begin your installation. It is a professional-grade solution for anyone looking to protect their RV with a durable, textured single-ply surface.

Leaky RV roofs can turn a relaxing camping trip into a nightmare of water damage and mold. This Class A Customs EPDM kit provides a comprehensive, all-in-one solution to resurface your camper or trailer with a heavy-duty 32 mil membrane. I love that it includes everything needed for a professional-grade install, from the water-based acrylic adhesive to four tubes of self-leveling silicone caulk and two rolls of gray putty tape. The white membrane features both smooth and textured sides to ensure a proper fit over your unit's contours. Just a pro tip: since this ships folded, you need to unbox it and let it relax flat for several hours before you start working to ensure those temporary creases disappear completely.