Best Cnwooaive in 2026

【Professional Tool】: This Brake Caliper Press constructed of strudy carbon steel, designed for the adjustment of automobile brake pumps. Please note, this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress at the same time, which some brakes need. Also, the distance between the two spreading plates is from 1-1/2" to 2-1/2", may not insert into some smaller caliper.

【360° Drgree Ratchet】: This tool adopts a full 360 degree swing ratchet design so that the spreader may be placed at any position. What's more, your hands will not get fatigued from the constant squeezing.

【Using Instructions】: Swing the long lever handle to expand and retract the two spreading plates, and the positive and negative regulation is realized by flipping the reversing switch on the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the suitable size to insert into the calipers, then go ahead to swing.

【Material】: Constructed from top quality steel, high strength, thicken touched surface, sturdy and durable for long time use.

【Convenient】: It is quick and easy to use disc brake spreader, when separate pistons in their calipers using it.

【Operation】: Normally operated with the supplied T-bar but can also be used with a 1/2" ratchet.

【Material】- These hose clamp applies extra sturdy steel alloy with zinc plating, preventing it from twisting and breaking.

【Locking Mechanism】- Plier has ratcheting and locking mechanism to hold clamp in the open position. Makes removal and installation of clamp much easier in narrow locations.

【Applications】- Works on metal and plastic self-tightening hose clamps (Diameter 11/16" - 2-1/2" (18mm - 54mm))

【Strong Material】 - Constructed from high quality chrome vanadium just forging, the overall heat treatment, strong and durable. Corrosion-Resistant black oxide finish, preventing damage to bearings.

【Well Equipped】Removes bearings, pump bearings, bushings,Removes all sleeve type bearings with 1/22 inside diameter.

【Advantage】 - The three-jaw design can apply pressure evenly to prevent damage to the bearing and ensure stability during use. There are two installation methods for the claw foot.

【Material】: Made of high carbon steel and chrome vanadium steel, it has corrosion resistance and higher durability.

【Design】: With a large and powerful handle, it can provide maximum torque and non-slip handle to increase comfort.

【Easy to Use】: Replace the brake pads faster by compressing the internal brake pad and resetting the piston. Tighten the built-in knob by hand to provide a comfortable grip; you can also use a socket wrench with a 5/16" socket adapter.

【Practical】- CNWOOAIVE 3/8" Hex Axle Tool is designed to install, remove or adjust front tire axles for sport and dirt bikes with hexagonal axle holes.

【6 in 1 Multipurpose Design】- 6 different metric hex sizes include 12mm, 14mm, 17mm, 19mm, 22mm, 24mm to meet your various needs.

【Application】- Ideal tool for removing motorcycle front tires. Also available on a variety of bikes including CB1000RR, CBR600RR, R600, GSXR1000, R1, R6 and R1000 bikes.

【Material】- These hose clamp applies extra sturdy steel alloy with zinc plating, preventing it from twisting and breaking.

【Locking Mechanism】- Plier has ratcheting and locking mechanism to hold clamp in the open position. Makes removal and installation of clamp much easier in narrow locations.

【Applications】- Works on metal and plastic self-tightening hose clamps (Diameter 11/16" - 2-1/2" (18mm - 54mm))

【High-Quality】- This cable hose clamp plier applies extra sturdy alloy steel, preventing it from twisting and breaking, stronger and more durable.

【Locking Mechanism】- The plier has ratcheting and locking mechanism, which holds clamp in the open position. Long reach cable makes it easier to remove and install clamps in narrow locations.

【Applications】- Works on metal and plastic self-tightening hose clamps (Diameter 11/16" - 2-1/2" (18mm - 54mm))

【Material】: Made of high-quality steel with excellent performance, corrosion resistance, rust resistance, high strength, and not easy to deform.

【Advantage】: Thickened duck feet have larger touched surface and are more sturdy and durable. Knurled anti-skid process design effectively increases friction and makes work easier.

【Convenient】: It is quick and easy to use disc brake pad spreader when separate pistons in their calipers.

【Fast Removal Tool】: For easy removal of 5/32" to 1/2" vacuum and fuel hoses. It is a faster and more effective removal method than other traditional options.

【Design】: The flat and thin head allows quick and easy access to narrow spaces.

【Easy to Use】: This sharpened jaw actually "digs" into the tube to grip it squeeze and the hose is easily pushed off by the silver jaw.

Ideal for 4 wheel drive cars/trucks

Includes left and right handed thrust bolt assemblies

The kit includes 18 adapters which fit a variety of modern car brands

【INCLUDING】 24 pc components inside-18 Disc Adapters(#10 VW incl.);2 Retainer Plates;1 Right Hand Thrust Bolt;1 Left Hand Thrust Bolt； One pair of gloves

【UNIVERSAL】 Fits most vehicles of domestic, European, Japanese etc.(NOT limited to specific brand & models as listed);

【DURABLE】 Made of durable carbon steel, suitable for heavy use;

UNIVERSAL COMPATIBILITY: This 24-piece brake caliper tool set by Orion Motor Tech includes 2 retaining plates, left and right thrust bolt assemblies, and 18 adapters to fit hundreds of domestic and import vehicle makes and models and give you everything you need to service your brake pads

EASY OPERATION: Attach the plate to the handle, select the disc adapter that fits your vehicle, then simply turn to rotate the pistons back into their calipers to clear your pads; embedded magnets in each thrust bolt assembly easily hold your drive keys and adapters in place during use

HEAVY-DUTY MATERIAL: This set of brake caliper compression tool is crafted from structural-grade 45# steel with industry-leading technology to offer superior strength and durability; the protective sandblasted surface further enhances its wear and corrosion resistance

IDEAL FOR MECHANICS: 22pcs pad and caliper wind back set to replace brake pads and rotate pistons back into the caliper

UNIVERSAL DESIGN: includes 18 adapters(including #10 VW) fitting hundreds of vehicle makes and models including American, European and Japanese. See Product Description below for some of the many compatible vehicles.

IM INCLUDED: Each kit includes detailed use instructions with an illustrated parts diagram.

Works on twin and quad piston fixed calipers, as well as single and twin piston floating calipers

Centrally located ratchet evenly spreads force in a parallel manner to prevent misalignment of pistons

Ratchet technology gives a full 360 degree swing so that the spreader may be placed at any position

Compress your vehicle's inner brake pad and rest the piston faster

Hand tighten with built-in comfort knob or use a socket wrench with a 5/16 inch socket adapter

Heavy duty steel construction that is 2x stronger and more durable than basic spreader

Makes brake pad replacement a quick and easy job

A quick way to spread brake pads and compress disc brake pistons for pad replacement on single, double and quad piston callipers

Simultaneously compress all four pistons on quad piston applications

Drum Brake Tool Kit: This brake drum and rotor tool removes hubs, drums, and brake rotors; Brake drum puller is designed for use with an impact wrench

Removes Common Hubs: Wheel hub removal tool includes three hub adaptors for most common hub sizes and types; Adaptors make this brake rotor removal tool more likely to work with your vehicle

Convenient Features: This hub puller includes drum and rotor pulling arms with raised stops for use with ratchet straps; Brake puller jaw spreads up to 12.75 inches with a 5 inch reach

Replace your pads faster by compressing your inner brake pad and resetting the piston

Apply maximum torque with this tool's large handle and slip resistant grip

A 2 piece, heavy-duty construction makes this product highly durable

IDEAL FOR MECHANICS: 12-piece pad and caliper wind back set to replace brake pads and rotate pistons back into the caliper

A MONEY-SAVING TOOL: Save hundreds of dollars on brake pad replacements

UNIVERSAL DESIGN: Fits most makes of vehicles of domestic, European, Japanese and other vehicles

IDEAL BRAKE PAD TOOLS: Get a safe and accurate caliper piston compression with our caliper reset tool; Compress inner brake pads and reset pistons on domestic cars, as well as import cars and light trucks with our disk brake spreader

CONVENIENT DISK BRAKE SPREADER TOOL: Work in tight areas where C-clamps can’t and easy on the hand unlike channellocks; Our brake spreader tool features a large knob that is easily torqued to compress the caliper piston on your braking system

FAST AND EASY: Compressing inner brake pads and resetting pistons for pad replacement is much more efficient with our brake piston compressor tool; Replace brake pads in no time with our brake pad spreader tool's maximum threaded length of 3-1/2”

OTC's Brake Caliper Spreader quickly and easily retracts pistons on most caliper styles, making for a trouble free pad replacement process

Fits calipers designed for 1/4 inch thick brake rotors commonly found on motorcycles

For all front and some rear disc brakes

SPECIFICATIONS: The ARES Heavy Duty Brake Pad Spreader is designed to let you compress your vehicle's inner brake pad and rest the piston more quickly. Designed for hand use with an ergonomic oversized comfort knob, this versatile heavy duty brake pad spreader can also be used with a 5/16-inch socket adapter for maximum ease of use.

DESIGN CONSIDERATIONS: Our Heavy Duty Brake Pad Spreader is made of heavy duty steel, so it's twice as strong as the average brake pad spreader, and the solid steel swivel joint at the tip lets compress evenly and precisely, so you can get the job done quickly.

COMMON APPLICATIONS: This heavy duty brake pad spreader is designed to be used almost universally with domestic cars and light trucks, so you'll be ready for a wide variety of applications.

Use this Disc Brake Pad Spreader to quickly and easily compress or push the brake caliper pistons back into place when replacing brake pads.

Made of superior-quality Carbon steel mixed with Chrome Vanadium steel for optimal durability. Features Heavy Duty Center Screw and Pressure Plate for Extended Use.

The solid steel swivel joint(29.9mm) at the tip enables you to apply even and precise compression force for a faster and easier job.

【APPLICABLE】Essential tool for retracting the brake piston to allow insertion of new brake pads.

【INCLUDING】Chemically blackened steel spreader plates. (2"x2-1/4") Each plates, Max Spread 3-1/4".

【FEATURE】Fitted with tommy bar but can be used with 1/2'' drive ratchet wrench or 0.83'' spanner.

【Application】This brake caliper press tool suits for disc brake, NOT for drum brake. The tool is equipped with 2 groups of push boards: 7.01x2.36"and 4.53x2.17".Smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers. Also this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress, which some brakes need.

【Labor Saving】Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. The ratchet is in the centre of the dual piston brake caliper compressor, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation.

【Use-friendly】 Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the suitable size to insert into the calipers, then go ahead to swing.

Durable Material: Carbon steel construction with a rust-proof blasted finish, these blades will stand up to heavy use and accidental drops. It’s perfect for everyone from DIY novices to professional mechanics.

Easy Operation: For brake pad replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies.

Package Included: 18 x Disc Adapters (#0, #2, #3, #4, #5, #6, #7, #8, #9, #10, #A, #E, #F, #K, #K1, #K2, #M, #N); 2 x Handed Thrust Bolt Assemblies (Left & Right) ;2 x Retainer Plates (#O, #1) ;2 x Rubber Coated Gloves

✔ Professional Brake Caliper Tool -- Used for pressing automotive disk brake caliper pistons back into bore when replacing brake pads, not for drum brakes. Easy to use with the ratcheting feature. It would be good for at home garage brake jobs. Perfect christmas gifts for men women

✔ How to Expand/Retract -- Pinch the center of the ratcheting mechanism until it gets enough pressure, then it will work great with just a couple swings of the ratcheting arm. i.e. you have to have some tension on the bolt/nut to allow the ratchet to activate. More labor-saving operation than c-clamp.

✔ Premium Material -- Universal brake caliper press tool constructed from carbon steel and heat treated for strength and durability, not easy to bent. The caliper hanging hooks suspend the caliper, brake hoses, and other parts for easy inspection of other car components when brake repair.

The pads spread from a range of 1-1/2" to 2-5/8"

The ratcheting design makes it easy to get even the most difficult of Brake jobs done faster

2Pc 7" x 2-3/8" Steel plate add on adapters are also included