Best Contitech in 2026

VD1002 crank shaft pulley TSD.

MS17 TSD Mounting Kit

Manufacturer's product or equivalent to the original product

Quality Damper Pulley Screw Set

Guaranteed to provide reliable repair in accordance with the manufacturer's assembly instructions

Ready to install.

No modification required.

Maximum weight supported: 6 cm

Package depth: 5 cm

Package Length (cm): 15

Please refer to the mapping table under product details with the appropriate vehicles and restrictions.

Technical information:

Packaging height [cm]: 6

Packaging length [cm]: 15

Packaging width [cm]: 5

Please refer to the classification table under product information with the appropriate vehicles and restrictions.

Box contents: 1 x screw set pulley - consisting of: 1 x screw, 1 x washer

Restrictions:

FOR PRESSED-ON HARMONIC BALANCERS: Harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt; Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers

WIDE APPLICATION: Crankshaft harmonic balancer puller designed for use with Model GM 2000 Generation II Cadillac (1988 - Newer), Chevrolet Trucks (2003 - Newer), Chrysler (1990), Ford (1995 - Newer), and Mitsubishi Eclipse (1995)

EASY TO USE: Unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process

Provides power to the engine accessory drive system for proper engine performance

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)

GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.

Package Dimensions: 1.27 L x 10.16 H x 7.366 W (centimeters)

Country of Origin : United States

Package Weight: 0.204 kilograms

Straightforward Balancer Changes: The specialized low profile design allows you to remove the harmonic balancer without first removing the radiator; Save time and effort with this balancer puller

No Bolts Required: Quickly and easily remove or install harmonic balancers without tapped holes found on many GM vehicles; The clip in design offers a strong grip without bolting into the balancer

Application Specific Fit: An ideal way to remove a harmonic balancer without tapped holes from a GM vehicle; Other general use pullers will be less efficient and ineffective

6-rib, 88.2" Multi-V / Serpentine belt

Straight-ribbed construction widely recognized by professional repair technicians

New construction and compounding improves durability for a longer lasting, quieter ride

Drop-forged CR-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller, and more.

Three jaws come with fine chrome plating to provide reliable and effective rust and corrosion protection. The drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH.

Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8-position reversible jaws offer an inside or outside grip with short, standard, long, or extra-long reach.

FITMENT:for Ford 1993 and newer 4.2L 4.6L 2-valve engines,4.6L 4-valve and 5.4L and 6.8L V-8 engines while installing timing chains.Similar to Rotunda 303-448,6024,525219.

MATERIAL:Hardened chrome molybdenum steel and coated with black oxide finish.Resistance on rust,deformation and crack.A long lasting finish.

AVOID DAMAGE:These engines are not Free Wheeling engines meaning that if the crankshaft is rotated during timing chain installation(Jumped Timing),it can cause significant damage to the Pistons and Valves if the cylinder heads are not removed.

This steel shaft sleeve adapts a crankshaft from 3/4 inch to 1 inch diameter, it comes with step key that offsets from 3/16 inch to 1/4 inch.

Alters motors with a different diameter shaft and alters pulleys for a different speed or belt.

Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements.

Material:Steel

Color: Silver

Convert a crankshaft from 1 inch shaft to 1 1/8 inch shaft

Double belt groove

6-3/8 inch diameter

Identify the water pump by looking at the distance between it and the timing cover, long water pumps are about 1 inch away from the timing cover

Harmonic Balancer For Mini Cooper S R52 R53 2002 2003 2004 2005 2006 2007 2008

Aftermarket Product with Premium Quality. 1 Year Warranty

Enhance Performanc.Easy Installation.High Reliability.

FITMENT: Works on all models with sprocket holes larger than 12mm (1/2") & hole separations from 19mm to 190mm (3/4"-7.5"), fits for Audi, Dodge, Ford, GM, Honda, Mazda, Nissan, Rover, Toyota, Volvo and so on

HEAVY-DUTY SPECIALIZED WRENCH: Made of high quality steel for durability and perfect match, hold the camshaft stationary during removal and installation of sprocket retaining nuts and bolts

APPLICATON: Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc., also works on diesel injection pump or water pump

Top quality product,designed to exact fit on your 3/4” diameter crankshaft with 3/16” keyway and enlarge it to 1” diameter with 1/4” keyway

Part’s Size: Sleeve inside diameter 3/4”; Sleeve outside diameter 1”; Sleeve length is about 3”; Sleeve Keyway slot 1/4”; Step Key Length is about 2”

Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc

【50MM Crankshaft Pulley Removal Tool 】-- Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on many Acura and Honda engine.

Using 50MM Crankshaft Pulley Removal Tool -- Use with square socket driver. >1/2" square drive use with breaker bar. Hole in center of tool - allows access to removal of crank shaft bolt.

【19 MM Harmonic Balancer Socket 】--The hex socket is used with an impact wrench to loosen the crankshaft bolt It can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications

【19mm Harmonic Balancer Socket】Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. Install/remove Honda 19mm damper bolts in minutes.

【Using of 19mm Tool】OAL 89mm, Used with 1/2” square drive.Designed with more than 3 x the mass of standard impact sockets to reduce flex and vibration, delivering maximum torque and more energy to remove the bolt.

【50mm Removal Holding Spanner】Fits for Honda (most) and Acura engines. Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on Acura engine.

APPLICATION -- ①50mm Crank Pulley Wrench Holder for removing/installing for many Acura and Honda engine crank bolts. ②19 mm Harmonic Balancer Socket for Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications.

FUNCTION -- ①The Pulley Wrench Holder is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt. ② This Heavy-Duty Impact Socket is the best way to remove a Honda crank bolt !!

OUTSTANDING MATERIAL -- ①The Pulley Holder is made from Hardened chrome molybdenum steel construction with extreme anti-wear property. ② And the 19 mm Harmonic Balancer impact Socket is made from Heat treated impact quality alloy steel.

Fitment – The Universal Cam Pulley Holder works on many Camry, Toyota, Nissan, Mazda, OHC and many others. The Harmonic Damper Pulley Holding Tool work on Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8. Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.

Harmonic Damper Pulley Holder – Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines.

Cam Pulley Holder – Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc. Designed with grooved pins to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tightening/loosening the bolt.

Harmonic Balancer Crankshaft Pulley 12610-77E12

Harmonic Balancer Crankshaft Pulley OEM: 12610-77E12,12610-77E10,12610-77E11

Harmonic Balancer Crankshaft Pulley Fits for: 1999-2003 Su-zuki Vi-tara 2.0L 4Cyl, all with 2.0LT engine. 1999-2004 Chevr-olet Tracker 2.0L 4cyl

COMPATIABLE VEHICLES - Harmonic Balancer Compatible for 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 Lexus GS300 2001 2002 2003 2004 2005 Lexus IS300 1992 1993 1994 1995 1996 1997 1998 1999 2000 Lexus SC300 1993 1994 1995 1996 1997 1998 Toyota Supra

PRODUCT FEATURES - Precision machined to providing smooth performance at all engine speeds.With the features of low noise,low vibration and good balance

PERFECTLY FIT - Parts are developed to the OE design, ensuring they will install properly and function as intended

FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998; Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase )

HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability; and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure

APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement; Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc.

Crankshaft Pulley