Best Crossery in 2026

EASILY INSTALLS IN SECONDS - so you can get to calibrating your Cobb Accessport V3, Edge CTS2 CTS Insight, or SCT X4 Mount in your Mazdaspeed 3, Edge, Fiesta or the Subaru WRX quickly!

SUPER STRONG SUCTION - This Cobb accessport V3 mount is field tested in intense heat and holds super stong on your windshield.An AWESOME UPGRADE to your existing Cobb Max Cobb Book Edge CTS3 Edge CTS2 CTS Monitor or any other Cobb Accessport devices.

EASILY SWIVEL, TILT & ROTATE for the optimal viewing angle of your Cobb Accessport, Edge CTS CTS2 CTS3 Insight devices

⇒ A WORLD CLASS DESIGN. Our car radar mount is compatible with almost all Escort, Beltronics and Rocky Mountain Phantom-T radar detectors. With the rotating knob you can adjust the angle of the detector to make it perfectly match with the pitch of the windshield.

⇒ PREMIUM BUILD. Crossery Radar Detector Mounts are made from the highest grade materials for superior performance under extreme heat and cold weather conditions and its powerful single suction cup offers strong adherence to the windshield or dashboard. Will NOT work with the ESCORT PASSPORT MAX series.

⇒ EASY INSTALLATION. Simply open the locking clamp, position the sticky cup on the windshield or dashboard and close the locking clamp. Then carefully slide the bracket into the detector mounting slot. Our car mount will hold your radar detector firmly, even on the most rugged roads.

Crossery Super Fast Charging Replacement for Dell 240w AC Adapter is built with Safety Standards offering Short Circuit and overheating Protection for your Alienware Laptop Charger to safely charge your Dell Alienware M17x R4 Dell G5 5590 NUC Charger

Longer Adapter for Less! The Crossery replacement Flextronics Dell FWCRC 240W Dell charger Alienware Charger Alien Charger is long at 11 Feet, The Alienware power Cord is 5 feet and the DC Cord is 6 feet. Competitor Alienware Alpha Power Cord is 9 Ft

Broad Compatibility with Dell Alienware 17 R4 laptop R3 R2 R5 15 Alienware 15 R2 Charger. Dell Precisions Laptops also replacement for all Alienware X51 Power Supply, Dell G5 Adapter. Replaces Dell 180W Power Adapter used with TB16 WD15 WD19 Docks

TRULY 2X FASTER - Transfer 15 Hours of Video/25000 photos in 1-2 minutes. Crossery Thunderbolt 3 doubles the speed to 40 Gbps as compared to any previous generation Thunderbolt PCIW. The faster your host and device, the faster it moves your whole life. (Transfer speed depends upon your host and device support.)

IS IT REALLY 8X FASTER THAN TYPE C 3.0? Absolutely, the Thunderbolt cable pack high-speed data transfer supplies power up to 100W making it 4x faster than USB-C Gen 2 & 8x Faster than Type C 3.0. Far superior to any other Apple Thunderbolt cable or Thunderbolt cable for Mac on the market.

2 YEAR WARRANTY - ZERO HASSLE - it works or you don’t pay, period. So take this Crossery apple thunderbolt 3 cable home. Unleash the full power amd discover why it’s the best Thunderbolt cable to transfer your life. We're so confident it'll outperform the competition that we guarantee it's high caliber performance for 24 full months. Who else does that?

Ships in Amazon Frustration-Free Packaging

Four-arm shape conforms to your dashboard

Garmin ball mount easily attaches to your existing cradle

Product Type: Powersports Vehicle Part

Spring-loaded 'X' design for large phones with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use

Includes RAM Twist-Lock suction cup base ideal for vehicle windshields and long length, B size RAM double socket arm; ball and socket technology allows for near-infinite adjustability

Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments

Bike Mount.

Compatible devices Edge 1000,Edge 20 ,Edge 200 ,Edge 25,Edge 500 ,Edge 510,Edge 520 ,Edge 800 ,Edge 810 ,Edge 820 ,Edge Explore 1000 ,Edge Explore 820 ,Edge Touring ,Edge Touring Plus ,Varia Rearview Radar

Secures unit to handlebar

This mounts to the Garmin motorcycle handlebar mount, which is Garmin P/N: 010-10962-10

Complete flat surface, drill-down mounting solution for the Humminbird Helix 5; RAM Mounts ball and socket technology allows for near-infinite adjustability

Includes 2.5" round base with C size 1.5" rubber ball, medium length C size double socket arm, and a 1" x 2.5" rectangle base with C size 1.5" rubber ball that connects to your Humminbird Helix 5

Made of power-coated, marine-grade aluminum for durability and reliability in the most demanding marine environments

Heavy Duty - The weight capacity of the marine electronic mount can be up to 15.5 lbs at rest and 4.5 lbs at motion. Heavy duty multi-angle drill base pedestal mounting solution for fish finder, GPS chartplotters and more. It is designed to install directly in a boat, kayak or on any flat surface.

Universal Design - Includes a C size 5.5” length 1.5” double socket arm and a complete flat surface, drill-down mounting solution; The ball and socket technology allows for near-infinite adjustability. Features 1.5 inch / 38mm / C Size ball joints that are compatible with all industry standard 1.5 inch / 38 mm / C size adapters and arms.

Sturdy - Use the most reliable materials to manufacture. Made of marine grade aluminum and stainless steel hardware, coated with high quality powder coatings for corrosion resistance and stability in the harshest conditions.

Package Dimensions: 6.197 cms (L) x 10.591 cms (W) x 12.801 cms (H)

Spring-loaded 'X' design for large phones with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use

Diamond ball base featuring universal AMPS hole pattern included; ball and socket technology allows for near-infinite adjustability

Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments

Suction Cup Mount

For the StreetPilot C550

Replacement

Product 1: Avoid on-the-road hassle: Enjoy a safer, more convenient drive with the TomTom Click-and-Drive, Mount - preventing your TomTom GPS navigation device from coming loose even on bumpy roads​

Product 1: Designed for windscreens: Affix your TomTom GPS navigation device Click-and-Drive, Mount to any spot on your windscreen, quickly and easily, thanks to the mount's integrated suction cup.​

Product 1: Smart magnetic mounting: Docking and undocking your GPS navigation device is quick and effortless - even with one hand - with the TomTom GPS navigation device Windscreen Mount Click-and-Drive.​

Compatible with 2013 Garmin Nuvi 7" products (Nuvi 2757LM, 2797LMT)

Easier navigation

Simply suction the mount to the windshield

Package Quantity: 1

Product Type: Gps Or Navigation System

Package Dimensions: 8.5 cms (L) x 8.7 cms (W) x 17.5 cms (H)

Spring-Locked Dashboard Dock Car Mount has a Non-slip Sticky 3M Tape, will holds your device firmly and securely in place even in the bumpiest conditions. ▶ Much steadier than GPS portable friction beanbag dashboard mount and suction cup holder. ▶ Three slots design allows angles adjustment. ▶ Clamshell dock mount is also great for holding phone as well as small items like parking cards, keys, passport or wallet, BFF for the sports-loving drivers if they are changing into their gym clothes.

Original texture design perfectly matches and blends well with any car's interior. ▶ An alternative to windshield and vent mounts, keeps your windshield clean, no interference with your air condition.▶ Easy to use, no mounting bracket needed, no magnets needed, no tools needed, directly adhere it to dashboard of cars with the 3M tape firmly. ▶ Sunshine-resistance shell cover will prevent device from getting overheat and keep the screen can be saw clearly without reflect light.

GPS Holder for Garmin Nuvi 40 42 44 50 51 52 54 55 56 57 58 60 61 65 67 68 (LM LMT), 200 205 250 255 260 265 270 275 285 295 350 360 370 465 500 550 600 610 650 660 670 680 750 755 760 765 770 775 780 785 850 855 880 885 (W WT), 1100 1200 1250 1260 1300 1350 1370 1390 1450 1490 1690 2200 2250 2300 2350 2360 2370 2450 2455 2457 2460 2475 2495 2497 2539 2555 2557 2558 2559 2577 2589 2595 2597 2598 2599 2639 2689 2699 3450 3490 3550 3590 3597 3750 3760 3790 (LM LMT LMTHD) & other 3.5-6" models

Complete GPS mounting kit for handlebars includes zinc-coated U-bolt base that accommodates rails from .5" to 1.25" in diameter, medium length B size RAM double socket arm, diamond base ball adapter, and form-fit GPS cradle

RAM Mounts ball and socket technology allows for near-infinite adjustability on bicycle and motorcycle handlebars

Made of powder-coated, marine-grade aluminum and high-strength composite for durability and reliability in the most demanding environments

Mount Zoom to your motorcycle. Includes mount, hardware and bare wire cable

Compatible with Zoom 350LM, 390LM and 395LM

Mounting bracket sold separately

RAM offers a diverse product line which is protected by over 100 issued patents with more than 60 patents pending

RAM ball and socket mounts feature a design revolving around an elastomeric rubber ball

Incorporating a non-slip feature as well as shock and vibration dampening, our often imitated but never duplicated mounting solutions are truly one of a kind and enhance every application they are used in

Replacement mount: Lost or damaged your TomTom Rider gps Mount but still have the RAM mount. Save money and get your hands on one of our original manufactured TomTom Rider Replacement Mounts.​

Easy handling: Docking and undocking your TomTom Rider gps navigation device is quick and effortless - with the TomTom gps navigation device Mount Kit.​

Charges while you ride: The TomTom Motorcycle gps navigation device Mount Kit keeps you powered up throughout your entire journey.​

Fits Garmin nuvi devices with 17mm swivel ball mounting pattern

Sticky suction base provides a maximum surface bond on smooth surfaces

Suction mount arm adjusts vertically and provides 360-degree rotation

Brand New in Frustration-Free Packaging

Bendable flex design enable the mount to bent to match the contour of the dashboard

The removable arm allows easy storage and better portability, Mount secures to the dashboard with a non-skid bottom and the pliable base molds to fit any dash

✔Perfect compatible with ALL Garmin GPS devices that come with swivel ball socket pattern.

✔Diameter: 2.2inch; Height: 2.5inch.

✔Ball Socket Suction Cup holds firmly on to your windshield, providing a stable viewing environment.

Newly innovative Ball Plunger Telescopic Arm, pivots in 240 degree and adjust from 4.13 inch to 5.75 inch, for your easy reach and optimal viewing. Adjust the length of the arm with just one hand, simply push or pull.

Strong suction cup has a adhesive gel base will mount your Garmin gps steadily in best viewing position.

An alternative to gps cd slot mount holder, gps air vent mount holder, gps friction beanbag mount holder and gps dash pad. Mounting bracket is not included.

Newly innovative Ball Plunger Telescopic Arm, pivots in 240 degree and adjust from 4.13 inch to 5.75 inch, for your easy reach and optimal viewing. Adjust the length of the arm with just one hand, simply push or pull.

Strong suction cup has a adhesive gel base will mount your Garmin gps steadily in best viewing position.

An alternative to gps cd slot mount holder, gps air vent mount holder, gps friction beanbag mount holder and gps dash pad.

Additional Replacement GPS Mount - Fits Garmin Nuvi GPS with 17.2mm swivel ball mounting bracket pattern [N.B.: Mounting bracket not included]

One Hand Operated Semi-Auto Extendable Arm - Just Pull & Push to adjust the length of telescopic arm for your easy reach of the device. No screwing nut to make length adjustment. Arm length adjustable from 4.13 to 5.75 inch.

Wide Tilt Angle Adjustable Arm - 240 degree adjustable max. 5.75 in. long arm, makes viewing and accessing your device easily.

Rail and bar base for UTVs and ATVs includes strap clamp and U-bolt components

Included B size 1" RAM rubber ball allows for connection to any B size RAM double socket arm; ball and socket technology allows for near-infinite adjustability

Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments

Perfect Compatible with ALL Garmin Devices with 17mm Swivel Ball Mounting Pattern(Mounting Bracket NOT Included)

Four-Arm Shape Conforms to Your Dashboard, Beanbag Design Enable the mount to Match the Contour of the Dashboard(Comparable to 010-11280-00).

Mount Secures to the Dashboard with a Non-Skid Bottom and the Beanbag Base Molds to Fit Any Dash board.