Best Custom Led in 2026

Complete Plug and Play Integrated LED tail light with high quality CLEAR lens - OEM fit. Features our Microprocessor based Blaster-X Technology with Brake Alert and Strobe Mode built in! New 2nd Generation Programming Interface allows users to easily customize features! New Sure-Blink Technology. Plug and play connectivity with OEM connectors! Recommended accessories: Blaster-X Control Switch. Made in the USA! 2-year Warranty & Satisfaction Guarantee!

Brake Alert automatically provides one of 11 user-selectable brake modulations the instant the brakes are applied. This alerts motorists the instant you apply the brakes - possibly saving seconds of reaction time for non alert motorists! The different modulation patterns can be user-selected VIA our new 2nd Generation Programming Interface! It can also be disabled completely if desired, for standard brake light operation.

Turn Alert is a NEW approach to our integrated LED tail light operation. Typically, and integrated tail light will switch between yellow and red on the side you are indicating a turn. This only creates a color contrast. With Turn Alert, the tail light cycles between full intensity yellow, and OFF, on that side. Therefore, there is a full contrast turn signal operation on that side.

Allows for Run AND Turn operation of Single-Intensity lamps on automobiles. Works with LED or incandescent lamps.

Specifically designed for Automobiles that have switchable running light circuits. High-Power capacity of 2A/ 25 Watts.

Comes as a complete kit with electrical connectors and detailed instructions. High-speed solid state design is compatible with all flasher relay patterns.

Works with all Custom LED Blaster-X Tail Lights to control strobe mode and programming features.

Comes with 24" long 22AWG gray wire soldered to switch.

Comes with 16" long 22AWG black wire with ring terminal for ground connection.

Universal Run Turn Brake control module that works with LED or Incandescent tail lights. Allows rear turn signals to function as running light, brake light and turn signals. Built-in 10 pattern brake modulator for center tail light or turn signals or both during brake light operation. Full-Contrast blink function allows blinker lamps to blink from OFF to FULL BRIGHT for maximum visibility. Preserves ignition-off hazard function for bikes equipped with this functionality.

Multi-Input power path ensures reliable operation across platforms. Works with LED or Incandescent lamps. Short-Circuit, reverse-wire, and overload protection. Slim-line compact and water-resistant construction 4.2" x 1.4" x 0.6". Comes with detailed instructions and simple connectors. *CANbus and Cruise Control Compatible. Recommended accessories: ELFR-1 Flasher Relay OR Stage II Load Equalizers Designed by Custom LED, built by Custom Dynamics. 5-Year manufacturers warranty.

Pattern 0: Four Flashes then Solid (Incandescent or LED) Pattern 1: Four Flashes, Solid for 3 Seconds, Repeat (Incandescent or LED) Pattern 2: Seven Flashes then Solid (Incandescent or LED) Pattern 3: Seven Flashes, Solid for 3 Seconds, Repeat (Incandescent or LED) Pattern 4: Quad Strobe, then Solid for 1 Second then Quad Strobe (LED Only)

Complete Plug and Play Integrated LED tail light with high quality clear lens - OEM fit. Features our Microprocessor based Blaster-X Technology with Brake Alert and Strobe Mode built in! New 2nd Generation Programming Interface allows users to easily customize features! New Sure-Blink Technology Plug and play connectivity with OEM connectors! *RECOMMENDED ACCESSORY: ELFR-1 Flasher Relay & Blaster-X Control Switch*. Made in the USA! 2-year Warranty & Satisfaction Guarantee!

Brake Alert automatically provides one of 11 user-selectable brake modulations the instant the brakes are applied. This alerts motorists the instant you apply the brakes - possibly saving seconds of reaction time for non alert motorists! The different modulation patterns can be user-selected VIA our new 2nd Generation Programming Interface! It can also be disabled completely if desired, for standard brake light operation.

Turn Alert is a NEW approach to our integrated LED tail light operation. Typically, and integrated tail light will switch between yellow and red on the side you are indicating a turn. This only creates a color contrast. With Turn Alert, the tail light cycles between full intensity yellow, and OFF, on that side. Therefore, there is a full contrast turn signal operation on that side.

Complete Plug and Play Integrated LED tail light with high quality clear lens - OEM fit. Features our Microprocessor based Blaster-X Technology with Brake Alert and Strobe Mode built in! New 2nd Generation Programming Interface allows users to easily customize features! New Sure-Blink Technology. Plug and play connectivity with OEM connectors! Recommended accessories: ELFR-1 Flasher Relay & Blaster-X Control Switch. Made in the USA! 2-year Warranty & Satisfaction Guarantee!

Brake Alert automatically provides one of 11 user-selectable brake modulations the instant the brakes are applied. This alerts motorists the instant you apply the brakes - possibly saving seconds of reaction time for non alert motorists! The different modulation patterns can be user-selected VIA our new 2nd Generation Programming Interface! It can also be disabled completely if desired, for standard brake light operation.

Turn Alert is a NEW approach to our integrated LED tail light operation. Typically, and integrated tail light will switch between yellow and red on the side you are indicating a turn. This only creates a color contrast. With Turn Alert, the tail light cycles between full intensity yellow, and OFF, on that side. Therefore, there is a full contrast turn signal operation on that side.

OE-comparable harness (no pigtail connector) for hassle-free installation

OE-comparable mounting provisions ensure drop-in precise fitment

Rigorous and accelerated cycling tests to ensure product service quality and durability

Direct Replacement Tail Light Compatible with 2008-2012 Jeep Liberty

Evan-Fischer EVA15672017746 Features: Halogen, Clear & Red Lens, With bulb(s)

Replaces OE Number: 55157347AC-PFM and Replaces Partslink Number: CH2800180

100% Brand New; Only Lens and Housing Included; Passenger Side Only

Meets all Regulations in USA & Canada; with DOT & SAE Stamped

Replacement for Stock Assembly; Lenses Ensure Full illumination and Maximum Safety

Genuine OEM Polaris Product, part number: 2410668

Replaces OEM Part Number(s): 2410951, 2410668

OE-comparable harness (no pigtail connector) for hassle-free installation

OE-comparable mounting provisions ensure drop-in precise fitment

Rigorous and accelerated cycling tests to ensure product service quality and durability

Aftermarket Replacement Tail Light Compatible with 2009-2014 Ford F-150

This Evan-Fischer Tail Light is a replacement for OE, Original Equipment, BL3Z13405B Partslink, FO2818143C

Location: Driver Side

Rear Brake Tail Lights | Left Driver & Right Passenger Sides | Pair

100% Brand New in Box | Never Been Installed Before

Both Laboratory and Vehicle Tested to Ensure Highest National Safety and Fitment Standards

Seamless replacement - this tail light circuit board directly replaces the circuit board that comes stock on specified vehicles' tail lights

Easy installation - simply detach the failed circuit board and plug in this one

Required repair - tail light won't function without replacing a melted circuit board

[Fit] - 03-06 Chevy Silverado 1500 / 2500 / 3500; [Do NOT Fit] - 03 Silverado 3500 HD & Stepside Beds Models

[DOT & SAE] - Meets or Exceeds all Regulation in the U.S. & Canada

[EZ Install] - Direct OEM Replacement No Modification Needed

Features high intensity LED trailer lights

Left hand tail light features 4 white LED's for license plate illuminator

For trailers 80" wide or less

PERFECT FIT - SAE & DOT FMVSS-108 certified standard 6" size makes it easy to upgrade the dim, burnt-out, or damaged lights on your tractor, trailer, or work truck.

READY FOR THE WEATHER - With a sonically sealed, submersible, IP67 waterproof rating, our lights are better suited to deal with the elements. Go ahead, back them into a lake, they won’t mind.

BRIGHTER LIGHTS SAFER NIGHTS - We designed our tail lights with 10 super-bright colored LEDs behind colored diffused polycarbonate lens for true to color, improved visibility. Why? Because getting rear-ended can really ruin your day.

ILLUMINATE YOUR PLATES - Dramatically increase your vehicle or boat's visibility and aesthetics by showcasing its plates in blazingly bold cold-white LED illumination; sleek and elegant black housing makes a bold styling statement.

SECURE SURFACE-MOUNTING - Our kit comes fully-loaded with all hardware and accessories required for surface-mounting installation; includes rust-resistant stainless steel bracket and screws.

IP67 WATERPROOF RATED- Fully - Submersible, waterproof design protects the kit from water damage; excellent LED license plate light for all-weather driving and marine vessels like boats and personal watercrafts.

92-99 Suburban/Yukon/00 Yukon Denali 95-00 Tahoe/00 Classic 99-00 Escalade 92-94 Blazer

Protective coating on the Lens for longevity and clarity. Designed to directly replace OEM lenses with no complex modifications.

Fully enclosed sealed structure with solid silicon to keep water and dust out, no misty problems in all sorts of weather such as heavy rains, snow, dust storms to prevent debris from entering inside for a longer service lifespan.

Brock is a Trusted Name in Aftermarket Auto Parts Since 1960

Meets all safety and quality standards. OE Style; High Quality with precise fit and reliable function.

Manufactured to fit and work exactly like the original

ILLUMINATE YOUR PLATES - Dramatically increase your vehicle or boat's visibility and aesthetics by showcasing its plates in blazingly bold cold-white LED illumination; classy and modern chrome housing makes a striking styling statement.

SECURE SURFACE-MOUNTING - Our kit comes fully-loaded with all hardware and accessories required for surface-mounting installation; includes rust-resistant stainless steel bracket and screws.

IP67 WATERPROOF RATED- Fully - Submersible, waterproof design protects the kit from water damage; excellent LED license plate light for all-weather driving and marine vessels like boats and personal watercrafts.

PERFECT FIT - SAE & DOT FMVSS-108 certified standard 6" size makes it easy to upgrade the dim, burnt-out, or damaged lights on your tractor, trailer, or work truck.

READY FOR THE WEATHER - With a sonically sealed, submersible, IP67 waterproof rating, our lights are better suited to deal with the elements. Go ahead, back them into a lake, they won’t mind.

BRIGHTER LIGHTS SAFER NIGHTS - We designed our tail lights with 10 super-bright colored LEDs behind colored diffused polycarbonate lens for true to color, improved visibility. Why? Because getting rear-ended can really ruin your day.

ILLUMINATE YOUR PLATES - Dramatically increase your vehicle or boat's visibility and aesthetics by showcasing its plates in blazingly bold cold-white LED illumination; gray housing makes an elegant styling statement.

SECURE SURFACE-MOUNTING - Our kit comes fully-loaded with all hardware and accessories required for surface-mounting installation; includes rust-resistant stainless steel bracket and screws.

IP67 WATERPROOF RATED- Fully - Submersible, waterproof design protects the kit from water damage; excellent LED license plate light for all-weather driving and marine vessels like boats and personal watercrafts.

Description: Combination stop/turn/tail light with white base. 4.3 Lumens

Features: Snap-on, replaceable lens and easy to change bulbs

Durability: All weather molded plastic housing and durable lens build resists corrosion

PERFECT FIT - SAE & DOT FMVSS-108 certified standard 6" size makes it easy to upgrade the dim, burnt-out, or damaged lights on your tractor, trailer, or work truck.

READY FOR THE WEATHER - With a sonically sealed, submersible, IP67 waterproof rating, our lights are better suited to deal with the elements. Go ahead, back them into a lake, they won’t mind.

BRIGHTER LIGHTS SAFER NIGHTS - We designed our tail lights with 10 super-bright colored LEDs behind colored diffused polycarbonate lens for true to color, improved visibility. Why? Because getting rear-ended can really ruin your day.

Seamless replacement - this tail light circuit board directly replaces the circuit board that comes stock on specified vehicles' tail lights

Easy installation - simply detach the failed circuit board and plug in this one

Required repair - tail light won't function without replacing a melted circuit board

Brock is a Trusted Name in Aftermarket Auto Parts Since 1960

Meets all safety and quality standards. OE Style; High Quality with precise fit and reliable function.

Manufactured to fit and work exactly like the original

20W high power reversing light, Waterproof IP67.

Built-in EMC, easy installation just plug and play.

Compatible with Jeep wrangler JK JKU 2007-2018.

Description: Combination stop/turn/tail light with black base. 4.3 Lumens.

Features: Snap-on, replaceable lens and easy to change bulbs

Durability: All weather molded plastic housing and durable lens build resists corrosion

Brock is a Trusted Name in Aftermarket Auto Parts Since 1960

Meets all safety and quality standards. OE Style; High Quality with precise fit and reliable function.

Manufactured to fit and work exactly like the original