Best Damo in 2026

For 3/16" radius demi-bullnose / roundover;

Fits on polishers/ grinders with 5/8"-11 thread spindle;

Position 1 with coarse diamond grit 30/40;

For 40mm(1-1/2") thick full bullnose edge;

Fits on polishers/ grinders with 5/8"-11 thread spindle;

Position 1 with coarse diamond grit 30/40;

Diameter 1-3/8", Max. drilling depth 2";

5/8-11 thread fits on most popular high-speed grinders;

Use on the job site without using water;

For 1/2" radius demi-bullnose / roundover;

Fits on polishers/ grinders with 5/8"-11 thread spindle;

Position 1 with coarse diamond grit 30/40;

Best Value for Polishing Granite and Concrete Countertops;

DAMO 4" 2.7mm Wet Polishing Pads Set of 8 including grit 50,100,200,400,800,1500, 3000 and black buff;

DAMO 5" DWP-1257 Variable Speed Wet Stone Polisher;

Rating: 120V~ 60Hz, Amperage: 7A, Power: 800W;

Ground Fault Circuit Interrupter for safety protection;

Center water feed, Faucet/Garden Hose Adapters with 10 feet water hose;

Diameter 5/8", Max. drilling depth 2";

5/8-11 thread fits on most popular high-speed grinders;

Use on the job site without using water;

For 20mm(3/4") thick full bullnose edge;

Fits on polishers/ grinders with 5/8"-11 thread spindle;

Position 1 with coarse diamond grit 30/40;

For 3/4" bevel(45 degree) edge;

Fits on polishers/ grinders with 5/8"-11 thread spindle;

The nylon guide assure the profiled edge remains straight;

For 30mm(1-1/4") thick ogee edge;

Fits on polishers/ grinders with 5/8"-11 thread spindle;

The nylon guide assure the profiled edge remains straight;

Diameter 1-1/2", Max. drilling depth 2";

5/8-11 thread fits on most popular high-speed grinders;

Use on the job site without using water;

Diameter 2", Max. drilling depth 2";

5/8-11 thread fits on most popular high-speed grinders;

Use on the job site without using water;

Specs: Bearing Dia. 5/8", Number of Cutters 4, Overall Dia. 1-1/8", Overall Length 2-3/16", Shank Dia. 1/4", Carbide Height 1/2", Radius 1/4"

Mill moldings, doors, drawers and "soften" sharp edges of any wooden parts

Most feature Freud's unique Quadra-Cut design for flawless finishes

Specs: Bearing Dia. 1/2", Number of Cutters 4, Overall Dia. 2", Overall Length 2-7/8", Shank Dia. 1/2", Carbide Height 1", Radius 3/4"

Mill moldings, doors, drawers and "soften" sharp edges of any wooden parts

Most feature Freud's unique Quadra-Cut design for flawless finishes

✅ 𝐓𝐡𝐞 𝐁𝐞𝐬𝐭 𝐂𝐍𝐂 𝐑𝐨𝐮𝐭𝐞𝐫 𝐁𝐢𝐭𝐬 𝐒𝐭𝐚𝐫𝐭𝐞𝐫 𝐒𝐞𝐭 - Confused about choosing the best CNC router bits?For those new to CNC routers, IDC Woodcraft offers the ideal CNC router bits tool kit for carving wood. With these high-quality carbide bits, you'll be on the right track from the start. These bits are made of tungsten carbide steel and are built to last. This American-made set is intended to cover almost any type of CNC project you may design.

✅ 𝐂𝐨𝐦𝐩𝐥𝐞𝐭𝐞 𝐑𝐨𝐮𝐭𝐞𝐫 𝐁𝐢𝐭𝐬 𝐒𝐞𝐭 𝐓𝐨 𝐂𝐨𝐯𝐞𝐫 𝟗𝟗% 𝐎𝐟 𝐘𝐨𝐮𝐫 𝐏𝐫𝐨𝐣𝐞𝐜𝐭𝐬 - Designed to be the workhorse of your cnc wood carving jounery, our bits kit is equipped 90°/60°/30° v-bits, 1/4″, 1/8″ & 1/16" downcut end mills, an 1/8" up-cut 'drilling' endmill, 1/4" & 1/8" ball nose endmills, & 1" surfacing bit and 2 collets. Includes a 2nd bonus 1/8” downcutting endmill bit, making this a 13-piece set.

✅ 𝐎𝐮𝐭𝐬𝐭𝐚𝐧𝐝𝐢𝐧𝐠 𝐖𝐨𝐨𝐝 𝐂𝐚𝐫𝐯𝐢𝐧𝐠 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞 - From elegant cuts & delicate carves, to cool 3D carvings and angled inlays, these bits are designed to deliver it. Use30, 60, and 90-degree v-bits with blade-style edges to create super-clean cuts in groove carving. Ball-nose end mills are used for beautiful accent work and 3D carving. The spiral cutting edges of downcut router bits and up cut end mills give extremely clean finish cuts.

Add a round over bead edge to a variety of surface edges and projects or create small moldings to be used on its own or as part of a molding build-up

Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge

For use on table mount and handheld router

This round over Router bit has a 11/16" radius and 11/16" cutting depth. The shank is 1/2" in diameter.

Add a round over edge to a variety of surface edges and projects or create small moldings to be used on its own or as part of a molding build-up

Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge

Specs: Bearing Dia. 7/8", Overall Dia. 1-3/4", Overall Length 3-1/4", Shank Dia. 1/2", Carbide Height 13/16" - 1-11/32"

Adjustable at .002 inch increments for stock thickness of 1/2" to 1-1/4" and groove widths of 7/32" to 3/8"

Opposing shear angles eliminate chipping and tear out on top and bottom surfaces

This round over router bit has a 3/4" radius and 3/4" cutting depth. The shank is 1/2" in diameter.

Add a round over edge to a variety of surface edges and projects or create small moldings to be used on its own or as part of a molding build-up

Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge

Shank: 1/2"

Cut Diameter: 2"

Cut Length: 1/2"

Specs: Angle 45°, Bearing Dia. 1/2", Number of Cutters 2, Overall Dia. 1-11/32", Overall Length 2-3/16", Shank Dia. 1/4", Carbide Height 1/2"

Chamfer size easily adjusts by changing the height of the bit or moving the fence

Cuts all composition materials, plywood, hardwood, and softwood

Specs: Number of Cutters 2, Overall Dia. 3/4", Overall Length 2", Shank Dia. 1/4", Carbide Height 7/16", Radius 3/8"

Makes beautiful engraved flutes in doors, drawer fronts and molding

Ideal bits for sign lettering

DURABLE – Multipurpose wood router bit set – delivers precision and durability

MULTI-PURPOSE – Varied 15-bit set – use for finishing in a wide range of applications

VERSATILE – bits are designed for processing soft and hard wood as well as wood composites

DURABLE – Multipurpose wood router bit set – delivers precision and durability

MULTI-PURPOSE – Varied 30-bit set – use for finishing in a wide range of applications

VERSATILE – bits are designed for processing soft and hard wood as well as wood composites

Specs: Minor Height 1/4", Number of Cutters 2, Overall Dia. 25/64", Overall Length 1-5/8", Shank Dia. 1/4", Small Dia. 3/16", Carbide Height 7/16"

The perfect way to hang plaques or shelving with completely hidden fasteners

Best for solid hard or soft wood, plywood or composites

Rout incredibly clean dovetail grooves and requires less sanding

Perfect fit for the matchfit dovetail Clamp system

Evacuate chips and dust, reducing friction, and heat, resulting in cleaner cuts.

Specs: Number of Cutters 2, Overall Dia. 1", Overall Length 2-3/16", Shank Dia. 1/4", Carbide Height 3/4", Radius 1/2"

Makes beautiful engraved flutes in doors, drawer fronts and molding

Ideal bits for sign lettering

Specs: Bearing Dia. 1/2", Number of Cutters 4, Overall Dia. 1-3/8", Overall Length 2-3/16", Shank Dia. 1/4", Carbide Height 5/8", Radius 3/8"

Mill moldings, doors, drawers and "soften" sharp edges of any wooden parts

Most feature Freud's unique Quadra-Cut design for flawless finishes

2D/3D CARVING ROUTER BIT – Made in the USA. The Spektra 2d/3d carving router bit is specially designed for 2D and 3D CNC profiling and carving in plastic and wood with CNC machines.

FOR PLASTIC AND WOOD – Use these CNC router bits for plastic and router bits for wood-working for 2D and 3D large-scale carving.

GREAT FOR DEEP PROFILING – This carving/profile router bit is a perfect bit for 3D carving. Great for dimensional signage, 3D millwork, 2D/3D contouring, profiling, modeling, pattern making for cabinetry, sign making, furniture, and jewelry mold making.

Cutting depth 1/8 to 1/2-Inch by replacing bearing, 1-3/8-Inch Diameter & 3/4-Inch Cutting Length.

For rabbeting of different size on wood and wood composites.

Anti-kickback design.