Best Darseity in 2026

Compatible with Chevy/GM LS1, LS2, LS3, LS6 LSX Engine, to be used on engine mounts or in vehicles. NOTE:Not suitable for all-wheel drive engines.

Designed to work on engines already installed in vehicles. Works on all GM 97 -2019 rwd V8 LS and LT baised engines. Cars & Trucks. 4.8, 5.3, 5.7, 6.0, 6.2, 7.0 liter ( NOT fit Gen 3 coyote 18 and up engines).

Simply bolt the starter into place and lock it securely to the flywheel teeth.

FITMENT: Compatible with 2007-2018 Jeep Wrangler JK 2 Door & Unlimited 4 Door (Sports, Sahara, Freedom & Rubicon).

GREAT UPGRADE: The cool and sporty design of the hood latch will make your vehicle stand out on the road!

EASY TO INSTALL: Directly replace the original latch without drilling. Simply replace the inadequate original with the included tool and enjoy the new look of your car.

Perfect solution to a loose or new hose bib.

No need to remove the faucet, install behind an existing loose faucet to securely hold the faucet in place. Particularly suitable for brick walls or other walls that tend to loosen.

The hose bib mounting plate is made of aluminum, rust and oxidation resistant, easy to drill and install, and strong enough to hold loose outdoor faucets.

27 millimeter

Heat treated

Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions

Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement

Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation

Locks flywheel in place when removing harmonic balancer on 6.6L Duramax Engines with Allison automatic transmissions

Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement

On 2500 and 3500 pickups, remove metal spring-loaded inspection plate on the bottom of the transmission

6 Volt And 12 Volt Applications

Use this special wrench to turn the flywheel and rotate the engine

Folds for easy storage

Also holds the flywheel or flex plate when torqueing the flywheel or harmonic balancer bolts

Thread 20 millimeter X 1.5 R.H. internal thread hollow

Enjoy a FREE 30-day trial of the Echelon Premier Membership with access to more than 3,000 live and on-demand connected fitness classes led by the world's best instructors through the Echelon Fit App. Enjoy exclusive content, class playlists, and music from top record labels, including your favorite hits from artists like Pitbull, Old Dominion, Lady Gaga, Daddy Yankee, and more. Classes range from 5 to 45 minutes and are designed for everyone from beginner to pro athletes. Explore classes like Cycling, Rowing, Running, HIIT, Kickboxing, Strength Training, Yoga, Pilates, and more. One membership allows up to five users, so your friends and family can enjoy the Echelon experience together.

DESIGN: The EX-3 boasts every cycling must-have, along with a few finishing touches for added polish. It strikes a unique balance between aesthetic appeal and space efficiency with its sleek, modern design and small footprint—all without compromising its structural integrity. Adjustable features let you adapt the EX-3 to your body while technology and its strong frame offer the workouts and durability necessary to pedal hard toward your goals.

FEATURES & PERFORMANCE: 32 levels of silent magnetic resistance lets you vary your workout intensity – Handlebar mounted 180 degree rotating console let’s you incorporate off bike exercises – 6” lever makes it easy to adjust the seat position fit any body - Fully adjustable toe cages on the pedals for a secure fit - Powder-coat frame for resistance to scratches - Padded handlebars are slip-resistant.

Disc Alarm Lock: Our alarm disc lock built-in sensors detecting shocks and movements will keep your motorcycle safe. 110dB alarm system scares off the potential loss while at home or parking outside, handy for bikers when parking outdoors or at home

Easy to use: press the alarm lock button to start the locking operation, and 5 seconds later there will be a "beep" to indicate the alarm is activated correctly. To shut off the alarm you will either have use the key to unlock it or wait 30 seconds use the key to unlock the alarm.

Premium Quality: Our motorcycle lock is made of aluminum alloy, high quality, and durable. waterproof, resistant to high temperatures, sealed against moisture, dust and dirt, suitable for outdoor climatic conditions.

This fits with ALL transmissions installed (does not require trans removal)

Use when installing/removing balancer, flywheel, torque converter, and many other parts or bolts

Made in Wichita Kansas from heavy duty, aerospace grade, USA produced billet aluminum

Thread 20 millimeter X 1.5 R.H. internal thread

Electronics

Electronics

Electronics

Chelhead LS flywheel locking tool Compatible with Chevy/GM, LS1, LS2, LS3, LS6, clears all RWD bellhousings-Manual and Automatic (do not work on FWD engines)

Works on all GM 97 -2019 rwd V8 LS and LT baised engines. Cars and trucks. 4.8, 5.3, 5.7, 6.0, 6.2, 7.0 liter( Will not fit Gen 3 coyote 18 and up engines)

TIG welded using 1/4" cold rolled USA Steel, proven design for strength and reliability

Applicable Engine: Compatible with FORD Duratec petrol engine 1.25, 1.4, 1.6, 1.7, 1.8, and 2.0 twin cam 16V, 2.3L, 2.5L engine; compatible FORD Duratorg diesel engine 1.4, 1.6, 1.8, 2.0 TDCI; compatible with FORD ECOBOOST 1.6 Ti-VCT, 1.5/1.6 VVT; compatible with MAZDA PSA 1.4, 1.6HDI,1.8L, 2.0L, 2.3L. engine code: 1.25 16V (DHA, DHB, DHC, DHD, DHH, DHG, F8JA, F8JB, FUJA, FUJB, M7JA, M7JB) ; 1.4 16V (ASDA, ASDB, FHA, FHD, FHE, FHF, FXDA / C, FXDB / D, FXJA, FXJB)

Engine Code: 1.6 16V (FYDA / C, FYDB / D, FYJA, FYJB, L1F, L1J, L1L, L1N, L1O, L1T, L1V, L1W, HWDA, HWDB); 1.7 16V (MHA, MHB); 1.8 16V (EYDB, EYDC, EYDD, EYDE, EYDJ, EYDG, EYDI, EYDJ, EYPA, EYPC, RKA, RKB, RKF, RKH, RKJ, RKK); 1.8 16V with control chain (CDBB, CGBA / B, CHBA / B, CSDA, CSDB, QQDA, QQDB, QQDC); 2.0 16V (EDBA / C, EDBB, EDBD, EDDB, EDDC, EDDD, EDDF, NGA, NGB, NGC, NGD); 2.0 RS / ST170 (ALDA, HMDA) 2.0 16V with control chain (AODA, AODB, AOWA, CJBA / B)

OEM Equivalent Part Number: This flywheel locking timing tool kit have 18pc tools, have everything you need for timing, replace OEM: 303-1097; 303-748; 303-1550; 303-1552; 303-1054; 303-1059; 303-735; 303-1552; 303-393A; 303-393-01; 303-393-02; 303-376B; 303-651; 303-193; 303-507; 303-734; 303-732; 303-xtra

SIMPLE REMOVAL TOOL: Our flywheel locking tool grabs the teeth of your flywheel or flexplate providing torque to quickly remove or install the car flywheel or flexplate; Our turner helps you apply proper torque to nuts during flywheel installation

COMPLETE ENGINE ACCESS: Sometimes it takes a specialty tool to get all of your engine work done efficiently; This flywheel removal tool will remove flexplates and flywheels so that you can service clutches, transmission, and rotate the crackshaft

FLYWHEEL HOLDER: Removing your flywheel bolt or torquing the harmonic balancer bolts can be a nightmare without a flywheel key; Lock your car’s flywheel sprocket or flexplate in position to get adequate nut torque for removal and installation jobs

Great Compatibility — Fit for all 2008-2020 Volvo D11, D13, D16 and Mack MP7, MP8, MP10.

Upgrade Design — Used to turn the Crankshaft flywheel in order to position it during timing procedures. Remove flywheel cover plugs and place the rotation tool, to rotate the flywheel with ease. The Crank Flywheel Tool will rotate freely while barring the engine over.

Must Have Tool — If you’re planning on performing an overhead adjustment or are replacing your injectors on your D13, this tool is a must-have in your toolbox. Special designed to rotate the flywheel of crankshaft for correcting the timing position.

For turning and holding flex plates and flywheels

Easily turn engine from underneath the vehicle

Spring tension holds tool onto flywheel, allowing free use of both hands

【Function】-- Clutch plate hub nut spanner tool designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch.Another Used for removal of the flywheel or rotor if applicable.

【Fits】 Flywheel Puller for GY6 50CC 125CC 150CC Yamaha Honda Suzuki KTM ATV scooter dirt bike; Clutch lock tool for 50cc-125cc Honda Motorcycle ATV Dirt Bike Go Kart Pit Bike 4 Wheeler

【Flywheel puller Size & Material】-- Stator magneto flywheel puller with 2 sizes:24mm&27mm; Magnetic steel

PULL FLYWHEELS: The ABN | Motorcycle & ATV Flywheel Puller Kit is a set of scooter repair and ATV repair tools used to separate the flywheel from the crankshaft taper and can even be used to pull clutch packs

FITS YOUR RIDE: For street, performance, and off-road small engines on scooters, motorcycles, ATVs, and dirt bikes; Compatible with Honda, Suzuki, Kawasaki, Yamaha, Ducati, Arctic Cat, Vespa, Bosch, and most late-model MX bikes; 5 single-ended pullers – M14xP1.5, M16xP1.5, M18xP1.5, M19xP1.0, M28xP1.5; 5 double-ended pullers – M20xP1.0 & M27xP1.25, M22xP1.0 & M25xP1.5, M22xP1.5 & M26xP1.5, M24xP1.0 & M27xP1.0L, M26xP1.0 & M28xP1.0; All righthand external threads excluding M27x1.0

BUILT TO LAST: Each flywheel removal tool constructed from durable steel with a black oxide coating for maximum strength and longevity that resists rust and corrosion; Each flywheel remover part comes pre-oiled and is permanently laser-etched with metric sizing

✅ COMPLETE SET: This motorcycle flywheel puller is a set of ATV and scooter repair tools that come in a complete 10 pullers, 5 of which are double-ended for increased applications. This set is servicing 15 different applications

✅ COMPREHENSIVE SOLUTION: Our flywheel puller will make your work easier, faster, and more effective. This comprehensive set of flywheel pullers are used to separate the flywheel from the crankshaft taper

✅ UNIVERSAL TOOL: Shankly’s motorcycle flywheel puller works with most motorcycle brands. Fits Honda, Suzuki, Bosch, Wasaki, Ducati. Yamaha flywheel, and many others or used as small engine flywheel puller on scooters

👍★【Compatible with Polaris 】-- Polaris RZR 900/1000 XP 50mm 1.5 Ranger Sportsman 570 14-18

👍★【Suitable Year and Model】--2014-2018 RZR XP 1000,2014-2018 RZR 4 XP 1000,2012-2016 RZR 570,2011-2013 RZR XP 900,2011-2013 RZR 4 XP 900,2014-2018 Ranger 570,2016-2018 Ace 570,2014-2018 Sportsman 570

👍★【Product Specification】--Features: 50mm x 1.5 left-hand thread (female) flywheel puller

Compatible for 6.6L Duramax engines with Allison automatic transmissions.

Materior : All components made of CNC steel, surface black coated with great rust and corrosion resistance, excellent solid and durable.

Work with Duramax 4500 / 5500 trucks.Remove the rubber inspection cap on the bottom of the transmission.Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place.

Inner Diameter:30mm/1.18";Screw:14mm/0.55".

Magneto flywheel pulle replacement for 4-Stroke 49cc 50cc 70cc 100cc 125cc 150cc Motorcycle Scooter.Not replacement for 2022 BD125-10.

Install the special nut of the flywheel puller in the threaded hole of the flywheel bushing,and the special screw is placed on the center hole of the crankshaft. Rotate the screw to increase the force on the crankshaft,so that the flywheel can be separated from the crankshaft.

Double Side Flywheel Puller Tool.24mm&27mm Outside Threads Stator Magneto Puller(please check with the size before you buy)

Replacement for GY6 CG25 JH70 SG50 50cc-150cc engine Chinese Scooter Parts Pit Bike Suzuki ATV Dirt Bike.Not replacement for 85 flywheel xr100.

24mm side thread use for most GY6 50 4 Stroke Scooter Moped ATV. 27mm side thread use for most GY6 125 150cc Scooter and other 125cc Motorcycles

3-jaw separator tool for removal of stuck or small tolerance pulleys, gears, bearings and more without damage them.

This 3 jaw gear puller is made with premium heat-treated 45# carbon steel to ensure no breakages or bend occur from the high tension experienced during pulling.

3 jaw gear puller can be reversed to pull parts from either the inside or outside. The jaws allows for easy gripping and access to tight spaces.

10 Piece kit servicing 15 different applications

For most motorcycles, dirt bikes, and ATV,s

SIZES: M14x1.5 M16x1.5 M18x1.5 M26x1.0 M28x1.0 M25x1.5 M22x1.0

It is often necessary to remove the crankshaft pulley when replacing the timing belt.

The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal.

Jamming tools into the teeth of the flywheel will cause serious damage to both teeth and housing.

Fit for LS1 2 3 LSX Engine ( Used on engine stand or in the vehicle. )

Simple two bolt installation - Bolts in place of starter

Featured with high strength and reliability.