Best Differential Pressure Plus Inc. in 2026

Measures 10 psi Differential Pressure

Has Re-settable Max Indicating Pointer for Daily Max Reading

Three Color Arc Provides Great Filter Status Visual Feedback

Updated with 5/16" Pressure Port Size, Fit in most gas valves and you do not need to purchase additional accessories. Flexible silicone tubing size updated to 19” length *1/4” diameter.

11 Selectable Units&High Accurate, This gas pressure meter features 11 selectable units of measure. The device measures gauge and differential pressure in the range of ±2 psi. High resolution(0.001psi) gauge.

Date Hold & Max/Min/Avg Recording, Press the HOLD button momentarily to freeze the displayed reading. Zero function for offset correction or measurement. Press the REC button to access the MIN/MAX/AVG recording mode.

SMART DUAL INPUT – RISEPRO® manometer can easily measure the differential pressure with its dual input probes.

RANGE & RESOLUTION – Measures +/- 2.000psi (0.001 resolution) with accuracy +/-0.3% in full scale

MAX PRESSURE – 10psi (Can resist up to 10psi but may not show readings when over 2psi)

This digital handheld manometers can measure the air pressure of the single pipe， or differential pressure of two pipes.it is suitable for measuring of ventilation and air condition systems,and widely use forgas measurement,calibration,and any trouble shooting of any gas pressure systems.

Ultra-low-power sensing & measurement with 32-bit MCU and 24-bit ADC make the measurement of air press faster and more accurately.Perfect for working on tankless heaters,Very handy to set gas pressures on electric valves,Using for service testing of gas pressure on domestic boilers, Measures Air Flow about your bathroom fan ect.

Selectable pressure range: ±2.999psi; Accuracy: ±0.3%FSO (at 25°C) ; Repeatability: ±0.2% (Max ±0.5%FSO); Linearity/Hysteresis: ±0.29%FSO.

Large LCD Display And Prevent Eyes weariness

Measuring Range: ±20.68 kPa / ±2.999 psi , Accuracy: ±0.3% FSO (at 25 OC)

Repeatability: ±0.2% (MAX±0.5%FSO) Linearity / Hysteresis: ±0.29%FSO

1. Advance with 4.7mm Tube connector, silicone tubing with 3mm inner diameter and 5mm outer diamter

2. 11 selectable units of measurement kPa, psi, kgfcm2, ozin2, bar, mbar, inHg, mmHg, inH2O, ftH2O, cmH2O.

3. Features like Data Hold, Error code Functions, auto power off disabled, LCD backlit dual display, Zeroing, offset and data compensation.

Measuring of vacuum, and pressure of air pressure of the single pipe or differential pressure of 2 lines

Record for maximum, minimum and Average pressure

Range: 0-10psi，11 units of measurement kPa, psi, kgfcm2, ozin2, bar, mbar, inHg, mmHg, inH2O, ftH2O, cmH2O cycle selectable

1" total travel and accuracy guaranteed to 0.001" per 1".Professional and quality dial indicator: Heavier and stronger, then more durable, not so easy to be deformed, more shock-proof, professional quality，pinion depth tool kit

Indicator Point set with fit most American and imported indicators. AGD specifications (4-48 threads) 22 pcs test tips included in the storage case. Turns your indicator into 22 different tools.

The base has V-groove on bottom for mounting on cylindrical surfaces. Permanent magnet surfaces with ON/OFF control provides 176lbs (80kg) Max Pull (30mm and up thickness metal countertop/surface).

Product Type: differential pressure gauges

Media compatibility: air and non-combustible gases

Wetted materials: plastic

Product Type: differential pressure gauges

Media compatibility: air and non-combustible gases

Wetted materials: plastic

MANUFACTURER DIRECT

Service: Air and non-combustible, compatible gases. (Natural Gas option available.)

Pressure Limits: -20 in Hg. to 15 psig; Temperature Limits: 20 to 140°F.* (-6.67 to 60°C).

Product Type: differential pressure gauges

Resolution: 0.20

Range: 0 to 10.0 inch

MANUFACTURER DIRECT

Service: Air and non-combustible, compatible gases. (Natural Gas option available.)

Pressure Limits: -20 in Hg. to 15 psig; Temperature Limits: 20 to 140°F.* (-6.67 to 60°C).

Bezel provides flange for flush mounting in panel

Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.

Precision litho-printed scale is accurate and easy to read.

Accuracy: 3 percent

Case: aluminum

Display: analog digital

Air and non-combustible, compatible gases.

Consult factory.

Glass filled plastic.

Product Name: LEFOO LFB mirco differential pressure gauge 0-0.5”W.C

Range:0-0.5”W.C.Temperature range:-7-60°.Dimensions:120*55mm

Material: Pressed cast aluminum.Overpressure: Rubber plug will break away when 172kpa.Weight:540g

Product Name: LEFOO LFB mirco differential pressure gauge 0-5”W.C

Range:0-5”W.C.Temperature range:-7-60°.Dimensions:120*55mm

Material: Pressed cast aluminum.Overpressure: Rubber plug will break away when 172kpa.Weight:540g

Measures 10 psi Differential Pressure

Has Re-settable Max Indicating Pointer for Daily Max Reading

Three Color Arc Provides Great Filter Status Visual Feedback

GlowShift Black 7 Color Series Differential Temperature Gauge is Designed to Monitor & Display the Fluid Temperature Running Through Your Truck's Rear Differential

Rear Differential Temperature Readings from 100° to 250° Fahrenheit - 2-1/16" (52mm) Gauge with Black Dial, Clear Lens & Illuminated Red Needle

7 Solid Color Modes & 2 Color Cycle Modes Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle - Colors Include Blue, Red, Green, Teal, Purple, White & Yellow - Connecting the Dimmer Wire to the Headlight Switch Reduces Brightness of the Gauge by 30% When the Headlights are On

Accuracy: 2 percent full-scale

Case: aluminum

Display: analog digital

Accuracy: 2 percent

Case: aluminum

Display: analog digital

Indicates when filters should be replaced

Attaches to Pentek 3G MM (meter mount) filter housing caps

Simple three-color display shows cartridge status

Product Name: LEFOO LFB mirco differential pressure gauge 0-1”W.C

Range:0-1”W.C.Temperature range:-7-60°.Dimensions:120*55mm

Material: Pressed cast aluminum.Overpressure: Rubber plug will break away when 172kpa.Weight:540g

【Product Name】Stainless steel Liquid Filled Pressure Gauge

【Size】1/4''NPT；2.5" DIAL FACE

【Installation method】Lower Mount

【Product Name】Stainless Steel Liquid Filled Pressure Gauge

【Size】1/4''NPT；2.5" DIAL FACE

【Installation method】Center Back Mount

Measuring Range: -10.0 mm.w.c to 10.0 mm.w.c and -100 to 100 Pascals | Accuracy: +/- 0.5% of Full Scale | Resolution: 1 Pascals / 0.1 mm.W.C | Display: Integrated 4 Digit Red LED 7 Segment Display 0.5. | easily repleasble with magnehelic gauge

Medium: Air or Gases ( Non Corrosive ) | Connection: 2 Nos. Hose Nipples of 4mm. ABS Plastic at the back | Alarm Type: Built in Buzzer Alarm for Process Violation Alert | Construction: Matte Finish ABS Plastic Enclosure | (Optional) Grownting box for brick wall mounting.

Power Supply: 24 Volts D.C. Typical | Size: Standard 4 ½'' (114.3mm.) Diameter ; Depth : 30 mm| Calibration: Will be provided at no extra cost valid for 1yr traceable to Electronic Test & Development Centre | Warranty: 1 Year Manufacturer Warranty

Product Name: LEFOO LFB mirco differential pressure gauge 0-10”W.C

Range:0-10”W.C.Temperature range:-7-60°.Dimensions:120*55mm

Material: Pressed cast aluminum.Overpressure: Rubber plug will break away when 172kpa.Weight:540g

[Key Features] The transmitter features high sensitivity, high accuracy, strong overload resistance and anti-interference ability, long-term stability and reliability.

[4~20mA Output Signal] By using unique stress isolation technology, precise temperature compensation and high stability amplification processing, the signal of the measured medium will be converted into 4~20mA output signal.

[No Need to Adjust Accuracy] Highly integrated sensor and amplifier circuits; Die-cast aluminum alloy is adopted, zero point and accuracy of circuit board need not be adjusted