Best Dig Corporation in 2026

Can be used with .118" ID micro-tubing outlet for hanging baskets

Dripper body is color-coded denoting flow rate

Small profile is easy to position and hide

🌞【Powered by Solar Energy】Automatic watering system for potted plants is powered by solar energy. It’s a system of controller (solar panel, 2200mAh battery, 2.5w pump and timer), pipe and drippers that deliver the proper amount of water to each plant. There is no need to connect the power cord to charge the plant watering system, as long as the sun can reach the place to self-charging.

💧【Take Water Anywhere】This solar plant self watering devices can take water directly from containers such as buckets /water tank, without the need for a tap. Excellent for yard, urban patios and balconies where faucets are unavailable.

⏱️【6 Preset Precise Timer Watering Modes】Press the MODE to switch the watering frequency. Blue indicator light shows from left to right according to your press: 5mins /15mins /20mins per 12H and 5mins /15mins /20mins per 24H. The watering flow from controller outlet is about 400ml (0.1gal) per minute, please select the number of drippers and the watering frequency according to your actual water demand of plants. Generally, 10-gallon water can last for at least 3weeks for 15 pot houseplants.

25 per bag

For use with 1/4" distribution or soaker tubing

Double barb design adds additional holding power

PRESSURE-COMPENSATING EMITTER: Maintains a constant 2 GPH flow rate even when the water pressure changes

HOW TO INSTALL: attach to end of 1/4 in. feeder line or punch directly into 1/2 in. supply tubing

USE TO WATER A VARIETY OF AREAS: Ideal for individual shrubs and trees in landscapes; and plants in container pots and hanging baskets

Micro-Drip-System-a water-conserving method to deliver a targeted amount of water via drip heads directly to the plant

Watering is perfectly adapted to the individual needs of your plants: From continuous drops to a slight drizzle, to a gentle mist spray - this advanced irrigation system will help you to conserve water

With the Micro-Drip-System drip irrigation, the water quantity per plant can be exactly dosed, so that no water is wasted

Orbit extra valve for complete watering kit is completely waterproof for uninterrupted operation

Valve has a leak-free design

Easy to install by plugging into timer; no wiring required

Universal coupling fitting connects two sections of any brand 1/4" Drip irrigation tubing in a straight line

Self-piercing barbed end for insertion directly into the side of 1/2" or larger Drip tubing

Unique barb design reduces insertion force; natural color blends with all earth tones

Valve for use with 1/4" Drip irrigation tubing

Top cap turns to adjust or completely shut off water flow

Self-piercing design; use with 1/4" Drip tubing or insert into 1/2" or larger Drip tubing

【Fits 1/4 Inch Irrigation Tubing】：Quarter Inch Tubing Connectors. Universal 1/4” drip irrigation parts work with most brand of 1/4’’ drip irrigation tubing. Note: Please check the size carefully before purchasing.

【Easy to Install】: The drip tubing parts are designed with barbs. Before assembly, please place these drip pipe fittings in 70-80 ° water for 10 seconds, and then push the pipe onto the barb. The pipe will remain tight after cooling.

【Enough Quantities】: 295pcs matching kits total, Drip Elbows Fittings (20pcs), Barbed Drip End Plug (30pcs), Barbed 4-way Connector (25pcs), Single barbs (35pcs), Straight Barbs (110pcs), Barbed Tees (75pcs). Meet all needs for 1/4 inch irrigation tubing connecting.

Comprehensive 108-piece kit for flower beds, gardens and landscaped areas; eliminates hand watering, saves time and money

Ultimate watering efficiency for all plants, shrubs and trees; up to 80% water savings

Simple 3-step installation: connect to faucet, insert fittings into tubing, attach watering devices

Complete 42-piece Drip irrigation kit eliminates watering by hand

Provides convenient water-saving Drip irrigation for up to 6 planters

Easy to assemble: just attach to faucet, cut tubing and connect watering devices

Ensure accurate and reliable drip system performance with this all-in-one faucet to drip irrigation connection kit. Connect your drip irrigation system to your water supply, keep out debris with a filter, maintain optimally low flow water pressure, and prevent backflow all with a single pre-assembled unit.

Connect ½” tubing to any standard ¾” male outside faucet, hose bibb, spigot, garden hose or sprinkler manifold in seconds for an easy fit. Leakproof connector is compatible with any 1/2" tubing sizes .520 to .620 ID (inner diameter) including Rain Bird and Dig.

Kit contains a drip irrigation backflow preventer, 150 mesh filter, top-quality Senninger 25 PSI pressure regulator valve, already put together and ready to use immediately.

Use these durable irrigation fittings to your connect 1/2" drip irrigation tubing. This 20-piece kit includes 6 tees, 6 couplings, 2 elbows and 6 tubing end cap closures.

These 17mm barbed fittings work with half inch drip tubing from 0.560 to 0.600 Inside Diameter (ID). Compatible with many types of Rainbird, Orbit, Dig and Toro tubing as well as generic 1/2" blank tubing or drip lines.

The go-to fitting option for most contractors will always be the standard 17mm barbed insert fitting. These 17mm drip fittings are made with long-lasting and environmentaly-friendly regrind tubing plastic.

【PERFECT MATCH 1/4 INCH IRRIGATION TUBING】JOYPRO 1/4 inch irrigation fittings can work with most of the standard 1/4" drip irrigation tubing. (Note: Please check the size of tubing carefully before purchasing.)

【MADE OF DURABLE PLASTIC MATERIAL】JORPRO drip line connectors are made of high quality engineering plastics, so our irrigation fittings are durable, strong, water resistant, chemical-resistant and long-lasting than others.

【EASY TO INSTALL】It is easy to install without any glue, tools or clamps. Simply push the tubing over the barbs, the barbed ends can grab 1/4" tubing tightly for a secure leak-proof connection.

【Adjustable Flow Velocity】- The water flow rate can be adjusted by adjusting the control valve. Our automatic plant watering device can control the speed, and the continuous dripping time is 3-20 days. Don't need to worry about your plants withering during during travel, business trips and vacations.

【New Upgrade Design】- Compared to other normal products, our upgraded watering spikes do not need to poke holes in the bottom of the bottle when in use. Its appearance is also more beautiful with three colors of blue, orange and green. The most important thing is that it will not stop watering due to the influence of water pressure.

【Eco-Friendly and Easy to Use】- Our plant watering spikes are made of high quality PP material, non-toxic, odorless, non-fading. Without any complicated installation, you just insert these automatic watering devices into the soil.

❀PACKAGE INCLUDES：This 200-pieces barb connector kit includes: 80 x straight barbs，60 x tube tees , 20 x elbows fittings, 20 x end plug, 20 x 4-way coupling. Meet all the needs of garden irrigation parts.

❀LONG-LASTING: Made of high quality engineering plastics, durable, strong, water resistant, chemical-resistant materials to assure long life.

❀EASY TO USE: Use these durable irrigation fittings to your connect 1/4 inch drip irrigation tubing.Save money and time buying everything you need at once. Jumpstart your drip irrigation system installation with this set of essential components for building a maintenance-free drip system.

★Made of Terracotta - Slow Release Water Automatically: The plant watering device is made from terracotta clay, which is a little fragile due to its property. The terracotta watering spikes will release water automatically. Thinner the spikes, faster the draining speed. Therefore, you may still find the spikes broken when you receive it. Do not worry. We take full responsibility for that. Just contact us.

★Easy to Use with Long Neck Wine or Plastic Bottles. Firstly, dig a hole in the soil. Secondly, insert the watering stakes into the soil gently. Fill the bottle or wine bottles with water, connect the bottle with stakes and turn upside down. Insert 7/8 part of the stakes into the soil to ensure better releasing effect. More stakes in the soil, more water is absorbed by the soil. Notice: For heavy bottles, you need to insert almost the whole stakes into soil so that the stakes will not break.

★Economic Choice of 6 Pack Plant Watering Stakes. The package includes 6 watering stakes which is favorable price set of plant watering spikes on Amazon. The size of one spike is 6.3” long and the weight for one spike is 3.52 oz. You could choose used wine bottles or long neck plastic bottles to be compatible with the stakes. The watering spike is a perfect tool for you to recycle the used bottles and free up labor at the same time.

【Adjustable Flow Velocity】- The water flow rate can be adjusted by adjusting the control valve. Our automatic plant watering device can control the speed, and the continuous dripping time is 3-20 days. Don't need to worry about your plants withering during during travel, business trips and vacations.

【New Upgrade Design】- Compared to other normal products, our upgraded watering spikes do not need to poke holes in the bottom of the bottle when in use. Its appearance is also more beautiful with three colors of blue, orange and green. The most important thing is that it will not stop watering due to the influence of water pressure.

【Eco-Friendly and Easy to Use】- Our plant watering spikes are made of high quality PP material, non-toxic, odorless, non-fading. Without any complicated installation, you just insert these automatic watering devices into the soil.

Total length: 5.2 inches / 13cm; water outlet hole diameter: 0.05 inch / 1.4mm. Irrigation angle: 360 degree Suitable for 4/7mm (Inner/Outer diameter) tube. Each dripper has 8 outlet holes at the top.

Make sure the hose is softened before connecting, you soak end of 1/4" tubing in VERY hot water before attaching to the dripper, A firm push with a little added wiggling gets the hose on with sprinkler.

Directs water exactly where you need it in a wide variety of planting areas Applies water similar to a spray head on an underground system for pots, tubs, ground cover, landscaped gardens and Etc...

Material: made of durable and strong plastic

Size: barb diameter is about 5mm

Application: suitable for connecting 2 sections of 1/4" tubing in order to direct water to another location or connect 1/4" tubing to a supply line

Wide range of applications: drip irrigation single barbed connector works well in connecting 2 sections of 1/4 inch mm tubing to direct water to another location, which can be applied for drip irrigation tubing system, flower beds, vegetable gardens, herbs gardens

How to install: just easily install the barbed coupling fitting by push the tubing firmly over the barbed part for a tight fit, not easy to fall off, which has strong holding power with barbed ends, making the connection more firm

No need for glues or tools: after fully inserting straight barbed connectors at the ends of the water pipe, you don't have to use any glue, tools, or clamps to fix the drippers or nozzles, garden work can be much easier and more relaxing

【PACKAGE LIST】It comes with 12 pieces barbed locked end cap connectors, which let you connect your irrigation systems as you wish.

【PERFECT MATCH STANDARD DRIP TUBING】These end plug connectors can connect to most of the standard 1/2" drip tubing(0.60"-0.63" OD). (Note: Please check the size of tubing carefully before purchasing.)

【MADE OF DURABLE PLASTIC MATERIAL】The drip line plug nuts are made of high quality engineering plastics, so our drip barbed connectors are durable, strong, water resistant, chemical-resistant and long-lasting than others.

▶Great Value：100 pieces of 1/4 inch irrigation straight coupling connectors are included in.

▶Fits 1/4 inch irrigation hose：This barbed coupling fittings connect two sections of any brand 1/4" drip irrigation tubing in a straight line. Two barbed ends makes the connection more strong and firm. Note:Please check the size carefully before purchasing.

▶Easy Installation：Directly insert this irrigation coupling at the ends of the water pipe, there is no need of any glue or tools, making garden work more convenient and much easier. Tips: Heat the end of hose to help it slide on this coupling.

FIT: Use With 1/4" Fittings - 6 inches pre-inserted emitter spacing, 1/2 GPH flow rate from each emitter, 100 feet Length

DURABLE: Resistant to chemicals and fertilizers commonly used in landscaping

EASTY TO USE: Flexible tubing for easy installation - Attach to 1/2" Drip tubing with 1/4" barbed fittings; compatible with most 1/4" fittings

Be a Gardening Master with the help of our superior and complete Drip Irrigation Kit: 10 Drip Irrigation Emitters Vortex + 20 Drip Emitters Spray + 50ft flexible & durable 5/16 irrigation tubing + 50ft 1/4 inch Drip Irrigation Tubing + 12 tubing coupler + 5 ¼ Tubing Tee Splitter + Tubing End Plugs + Water Connector + 1 x Complete Instructions Guide Hard Copy + 2 Grow your Own Vegetables & Fruits Guide full with pieces of advice and practical tips Digital Format.

Cut down your water bill - Minimize the amount of water loss by watering the roots of the plants with the garden drip irrigation system. Adjust the drip emitters 1/4 by rotating the cap and give your thirsty plants the amount of water they need. Our irigation system can be used for raised garden bed, as garden watering system for healthy vegetables, automatic watering system for potted plants, drip system for fruit trees, or as patio irrigation kit. Enjoy healthier plants with less cost and work

Make your own garden irrigation system kit easier than ever: run a 3/4 connection from your water source to the watering area. Use the 5/16 drip irrigation tubing as the mainline. Branch off with the 1/4 drip irrigation tubing and connect the drip irrigation emitters. Stick the dripper stake into the soil, adjust the desired irrigation spray width and feed your plant with your own drip irrigation system. Designed to work with between 20 and 45 PSI and a maximum output of 60 gallons/hour/emitter.

PRESSURE-COMPENSATING EMITTER: Maintains a constant 1 GPH flow rate even when the water pressure changes

HOW TO INSTALL: Attach to end of 1/4 in. feeder line or punch directly into 1/2 in. supply tubing

USE TO WATER A VARIETY OF AREAS: Ideal for individual shrubs and trees in landscapes, and plants in container pots and hanging baskets

【Comprehensive 119 Pieces 150FT Drip Irrigation kit】3m Main Pipe, 43m Branch Pipe, Faucet Connector, Fountain Nozzle, Drip Emitters Sprayer, Atomizing Nozzle, 1/4" Nozzle Tees, 1/4" Dripper Tees, 1/4" Barbed Couplings, 1/4" Single Couplings, 1/4" End Closures, 1/2" to 1/4" Barbed Tee, Main Line End Closure, Teflon Tape, Fixed Nylon Tape, 119 pieces in total. All the accessories you need to take care of your garden and vegetable garden in one place.

【Easy to Assemble and Water Saving】Just cut the hose according to the distribution of plants to be watered, quickly install it according to the instructions. The irrigation kit comes with 3 different nozzles all of which can be individually adjusted for water output. With 30 nozzles, you only need to turn on the faucet to meet all your irrigation needs, saving at least 75% of water consumption compared to traditional irrigation methods.

【Hassle-Free Connection】Equipped with 2 types of faucet connectors, basically suitable for all household faucets. The 3x4 1/2" to 1/4" Barbed Tee divides the water flow into 12 tributaries, increasing water pressure and preventing water shortages at the end of the drip irrigation system.

Be a Gardening Master with the help of our superior and complete irrigation tubing: 100 ft flexible & durable 1/4 inch drip irrigation tubing + Complete Instructions Guide Hard Copy + Grow Your Own Vegetables Guide full of pieces of advice and practical tips Digital Format + Grow Your Own Fruits Guide Digital Format + bonus 20 ft 1/4 drip irrigation tubing because you never know when you need a bit of Extra.

Make gardening less of a chore - Easy to assemble and use, the Carpathen drip irrigation tubing will feed your plants immediately. Just cut the drip hose to your desired length, put it in hot water for a minute to soften and connect it to your drip irrigation emitters and 1/2 inch drip irrigation tubing. Save your time and let the irrigation hose to water your raised beds, window boxes, garden rows, orchards, ground cover or other landscaped areas.

Create your own drip irrigation system - Use our drip irrigation hose to branch off a irrigation system from a larger 1/2 irrigation tubing. Connect to drip emitters vortex, spray, or mist and feed your plants. Since you never know when you need a bit of extra, we have added 20 ft as a bonus PLUS 2 Grow your Vegetables & Fruits Guides that will increase your gardening skills. Your DIY garden irrigation system will improve your plant growth and you will start to enjoy taking care of the garden!

Micro-Drip-System-a water-conserving method to deliver a targeted amount of water via drip heads directly to the plant

Watering is perfectly adapted to the individual needs of your plants: From continuous drops to a slight drizzle, to a gentle mist spray - this advanced irrigation system will help you to conserve water

With the Micro-Drip-System drip irrigation, the water quantity per plant can be exactly dosed, so that no water is wasted