Best Mister Landscaper Automatic Irrigation Drippers in 2026

Total length: 5.2 inches / 13cm; water outlet hole diameter: 0.05 inch / 1.4mm. Irrigation angle: 360 degree Suitable for 4/7mm (Inner/Outer diameter) tube. Each dripper has 8 outlet holes at the top.

Make sure the hose is softened before connecting, you soak end of 1/4" tubing in VERY hot water before attaching to the dripper, A firm push with a little added wiggling gets the hose on with sprinkler.

Directs water exactly where you need it in a wide variety of planting areas Applies water similar to a spray head on an underground system for pots, tubs, ground cover, landscaped gardens and Etc...

Flow rate remains constant in varying inlet water pressures and positions along length of tubing; Ideal for watering individual shrubs and trees in landscapes, and plants in container pots and hanging baskets

Fits ¼ in. tubing with internal diameter of 0.170 in. or punched hole with diameter of 0.170 in.; 1/2 GPH per emitter

Delivers the same amount of water no matter where they’re positioned on the line and at varying water pressures; Self-cleaning emitter features a turbulent flow design that flushes out sediments to reduce clogging

Height: 5.2 inches / 13cm and water outlet hole diameter: 0.05 inch / 1.4mm

Suitable for 4/7mm (Inner/Outer diameter) tube

Water flow can be adjustable by rotating the water outlet hole cap

SIZE: For use with any 1/4" Inch tubing size - 4 to 7 mm (Can also be punched into 1/2 drip tubing).

PREVENT LEAKS & BLOWOUTS: These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur.

DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE.

Flow rate remains constant in varying inlet water pressures and positions along length of tubing; Ideal for watering individual shrubs and trees in landscapes, and plants in container pots and hanging baskets

Fits ¼ in. tubing with internal diameter of 0.170 in. or punched hole with diameter of 0.170 in.; 1/2 GPH per emitter

Delivers the same amount of water no matter where they’re positioned on the line and at varying water pressures; Self-cleaning emitter features a turbulent flow design that flushes out sediments to reduce clogging

Unique Design: 1/4" drip emitter ensures wide water passages, large deep and wide cross-section that improves clogging resistance.Ideally for Garden Pots,Trees and Shrubs.

Adjustable Emitters: you can adjust the water flow mode and sprinkling distance until a complete shut-off by rotating the cap. And the dripper cap can also be opened for easy check and cleaning.

Applicable Irrigation Tubing：Barb connector of adjustable dripper accepts the following micro-tubing:4mm(inner)-7mm(outer). Flexibility- Allows placement of drippers exactly where necessary.

Quantity and size: 60 pieces of irrigation flag drippers in 3 different sizes, each size is with 20 pieces, 1 gallon per hour in black, 2 gallon per hour in blue and 4 gallon per hour in green, the lid color of each size is different, and different droppers work well in controlling the water flow of different soils, convenient for you to manage plants of different habits

Watering entire garden: the flag drippers fit for 1/2 inch trunk lines, also suitable for 1/4 inch branch lines; You can apply the branch lines to irrigate plants further away, ensuring the watering of your entire garden

Practical design: equipped with shut-off valves and 2 barbed pipes in large diameter, these drip emitters can provide stable moisture for different crops, making your garden more alive

SIZE: For use with any 1/4" Inch tubing size - 4 to 7 mm (Can also be punched into 1/2 drip tubing).

PREVENT LEAKS & BLOWOUTS: These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur.

DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE.

Color: Black and Red Material: Plastic.

Full open they will cover a 10 to 12 inch circle.

Has a 1/4-inch barb thread connection, Suitable for 4mm/ 7mm(Inner/ Outer diameter) tube.

【Package Include】25 drip emitters, 25 barbed coupling (on the emitter, take it down for using), enough to create a small irrigation system. The dripper is 5.1'' long, can be stably installed on the soil directly.

【Ajustable Flow】360 degree water flow, adjust the water spray from 0 to 18 GPH by rotating the cap, and the diameter of sprinkling circle accordingly from 0 to 1.5 feet. 30 PSI max working pressure. Can be turn off separately.

【Anti Clogging】Drip emitters feature a self-flushing design, provide continuous self-cleaning action even while irrigating. And the cap of the dripper can be removed for cleaning and maintenance. No need to worry about clogging.

【360 Degree Adjustable】: 8 spray hole and can adjust water flow rate , also for cutting off the water flow.Large water passages and self-flushing action help prevent clogging

【Connection】: 1/4-inch barb thread connection, 1/4'' hose, Suitable for 4mm/7mm(Inner/ Outer diameter) tube 【Make sure you put the connected part into the 70~80°water for 10seconds before assmbling. After it cools down the tube will stay tight.】

【Widely used】: Great for watering potted plants，For agriculture, lawn, garden sprinkler irrigation drip

✔100% brand new,Sturdy,durable

✔ Dripping and Water spray Dual function ,switched off individually,Adjustable water output

✔Suitable for 4mm/7mm(Inner/Outer diameter) tube

【Pressure compensation design】 Pressure compensation drippers are suitable for a variety of complex irrigation conditions, which can maintain 2 Gallon Per Hour water flow and 10-60 PSI working pressure stably even in long circuits and uneven terrain. Ideal for watering plants in outdoor landscapes, flower pots and hanging baskets.

【Compatibility】 The irrigation drippers are suitable for 1/4" tube with inner diameter of 0.17" or attach into supply tube with 0.17" diameter punch hole directly. Drip emitters can be buried and "ported" to the ground. Save water and promote rapid and healthy growth of plants.

【Reasonable design】 2 GPH emitters can maintain a constant water flow no matter where the drippers are placed, even with different working water pressures, ensuring that the same amount of irrigation water is provided for each plant. The emitters with turbulent flow and self-cleaning design can flush out sediment to reduce clogging.

Adjustable valve: The plant watering Device with control valve can control the dripping speed of 0-60s/drip, and the sustained drip lasts for 1-15 days.Only adjust the valve to Meet your needs without complicated setup steps.

Simple and Convenient: Installed without any tools, just drill some holes in the bottom of the bottle or cut the tail of the bottle to keep the air flowing.Loosen the slow release control valve switch on the regulating valve according to the irrigation needs.

Warning：Compatible with all 1.1 inch/2.8cm inner diameter, suitable for most beverage bottles, not suitable for mineral water and purified water bottles. (Measure the inner diameter of the bottle including the thread size before installation)

13.3 GPH at 30 PSI, 8.5' radius of throw

Use with stake and riser for full installation

Uniformly sprays water over a 1/3 circle area

Made in the USA

You'll want to have at least a few of these on hand when installing any kind of Mister Landscaper system

Brand: Mister Landscaper

High Quality: Irrigation dripper made of high quality plastic, these flag emitters are with nice resistance to ultraviolet rays, stable quality, long service life

Flag Drip Emitter suitable for 4mm / 7mm tube, 1/2 inch trunk lines and PE Tube; Working Pressure: 0.5KG to 3.5KG

Removable flag top for fast and easy cleaning.The dripper can be accurately installed where needed, reducing construction and maintenance costs

Made In The Usa

Use Our All-In-One Tool (Mla-Tool) To Make Installation Of These 1/4-In Tees Even Easier

10 Tees Per Bag