Best Raindrip in 2026

PRESSURE-COMPENSATING EMITTER: Maintains a constant 2 GPH flow rate even when the water pressure changes

HOW TO INSTALL: attach to end of 1/4 in. feeder line or punch directly into 1/2 in. supply tubing

USE TO WATER A VARIETY OF AREAS: Ideal for individual shrubs and trees in landscapes; and plants in container pots and hanging baskets

Works in a variety of areas, from small to large, flat or sloped; transports water to trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets

Fits ¼ in. tubing or dripline with internal diameter of 0.170 in. or punched hole with diameter of 0.170 in.

Connect three sections of ¼ in. supply tubing or dripline for a “T” intersection, or add two branches of ¼ in. tubing or dripline from a ½ in., 5/8 in., or 0.710 in. supply line

1/4 INCH IRRIGATION TUBING: Create a feeder line that supplies water to a low-flow, drip-watering device, or use as a main line in a small drip irrigation system; for trees, shrubs, flower beds, groundcover, gardens, plants in pots, and planter boxes

CONNECT TO DRIP IRRIGATION PARTS: Connect to main supply line with 1/4 in. micro fitting. connect other end directly to emitter to deliver water to plant; works with Raindrip drip irrigation products and other products with compatible connection type

EASY TO USE: As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated; Tubing coil comes shrink wrapped for convenience; easy to access as needed BUILT

AUTOMATE YOUR WATERING: Schedule run times, frequency, set timed manual watering and rain delay for your drip irrigation system

COMPATIBILITY & SET-UP: Works from an outdoor faucet or hose bibb; compatible with Garden Hose Thread (GHT), not British Standard Pipe Thread (BSP) connection point; use adapter (not included) to connect to desired supply tubing size

THREE EASY-TO-USE CONTROL DIALS: 1) set frequency; 2) set run time; 3) override scheduled program for rain delay (24 to 72 hours) or add timed manual watering without disrupting your programmed schedule; Delay button adjusts the start time; simply press until you reach your desired start time for watering (timer is set to start automatically)

PRESSURE-COMPENSATING EMITTER: Maintains a constant 1 GPH flow rate even when the water pressure changes

HOW TO INSTALL: Attach to end of 1/4 in. feeder line or punch directly into 1/2 in. supply tubing

USE TO WATER A VARIETY OF AREAS: Ideal for individual shrubs and trees in landscapes, and plants in container pots and hanging baskets

SAVE TIME AND EFFORT: This plant watering kit has everything you need to get started with drip irrigation and precisely water up to twenty individual plants; Use the kit to build, expand, or repair a drip irrigation system

INSTALL IN 3 EASY STEPS: 1) Connect timer and tubing to water source; 2) Lay out tubing; 3) Use fittings to attach drippers; Customizable system for your garden's potted plants, hanging baskets, or planter beds

IDEAL FOR ANY LEVEL GARDENER: Easy to customize, install, and operate; Kits contain all the components you need to set up your own drip system; schedule timer for worry-free watering

Slowly waters the soil around your plants for complete root zone hydration; Ideal for short runs on flat surfaces, such as vegetable gardens, borders, and around small plants

Tubing outside diameter (OD) is 0.250 in., internal diameter (ID) is 0.170 in.; connects to ½ in., 5/8 in., or 0.710 in. supply line with ¼ in. micro fitting such as a barbed connector or Clamp N Pierce Connector

As part of a complete drip irrigation system, the soaker tubing seeps out water from the entire line, keeping soil moist; Flexible tubing bends to accommodate curved irrigation areas as well as straight runs

Use as a main supply line connected to a low-flow, drip-watering device, or punch emitters into the tubing to deliver water along the run

Tubing outside diameter (OD) is 0.700 in., internal diameter (ID) is 0.600 in.; connects to point-of-connection device using appropriate fitting; emitters and feeder lines can be punched directly into the line or attached to the end

Works in a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets

Branch off the main supply line to create a feeder line that supplies water to a low-flow, drip-watering device, or use as a main line in a small drip irrigation system; Works in a variety of areas, from small to large, flat or sloped; transports water to trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets

Tubing outside diameter (OD) is 0.250 in., internal diameter (ID) is 0.170. in.; connect to main supply line with ¼ in. micro fitting such as a barbed connector, connect other end directly to emitter to deliver water to plant; Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion

As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated; Tubing coil comes shrinkwrapped for convenience; easy to access as needed

Flow rate remains constant in varying inlet water pressures and positions along length of tubing; Ideal for watering individual shrubs and trees in landscapes, and plants in container pots and hanging baskets

Fits ¼ in. tubing with internal diameter of 0.170 in. or punched hole with diameter of 0.170 in.; 1/2 GPH per emitter

Delivers the same amount of water no matter where they’re positioned on the line and at varying water pressures; Self-cleaning emitter features a turbulent flow design that flushes out sediments to reduce clogging

Ideal for watering groundcover, flower beds, planting beds, vegetable gardens, and plants which prefer some humidity

Built-in 10-32 threaded inlet connects emitter to rigid riser; Spray reaches up to 9.0 ft. radius at 30 PSI; Discharge water from 0 to 12.9 GPH at 0-30 PSI

Non-pressure Compensating Emitter delivers water gradually; expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source

Releases water in a stream spray, full-circle pattern; amount of water flow is adjusted by turning the dial on the bubbler; Ideal for watering groundcover, decorative grasses, flower and vegetable gardens, as well as trees and shrubs

¼ in. barbed inlet fits into punched hole in supply tubing with outside diameter (OD) 0.250 in.

With this non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source; Increase or decrease water flow by turning the dial; delivers water gradually

1/4 INCH IRRIGATION TUBING: Create a feeder line that supplies water to a low-flow, drip-watering device, or use as a main line in a small drip irrigation system; for trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets

CONNECT TO DRIP IRRIGATION PARTS: Connect to main supply line with 1/4 in. micro fitting such as a barbed connector, connect other end directly to emitter to deliver water to plant; works with Raindrip drip irrigation products and other products with compatible connection type

EASY TO USE: As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated; Tubing coil comes shrink wrapped for convenience; easy to access as needed

Connect ½ in. distribution tubing or dripline to your water source; built-in swivel allows you to add or remove the adapter without twisting and potentially kinking the tubing; Connect to water source, such as a hose bibb or garden hose

Fits ½ in. tubing and dripline with outside diameter of 0.620 in. on one end, 3/4 in. MHT connection point on opposite end

Built-in swivel makes it convenient to remove or attach adapter without twisting and potentially kinking the tubing; Filter washer inside the adapter ensures a watertight fit and screens out particles before they can clog the system

Flow rate remains constant in varying inlet water pressures and positions along length of tubing; Ideal for watering individual shrubs and trees in landscapes, and plants in container pots and hanging baskets

Fits ¼ in. tubing with internal diameter of 0.170 in. or punched hole with diameter of 0.170 in.; 1/2 GPH per emitter

Delivers the same amount of water no matter where they’re positioned on the line and at varying water pressures; Self-cleaning emitter features a turbulent flow design that flushes out sediments to reduce clogging

Swivel adaptor

For use with 1/4-Inch tube only

Connects 1/4-Inch tubing to faucet or other 3/4-Inch male hose thread

Connect 5/8 in. distribution tubing or dripline to your water source; built-in swivel allows you to add or remove the adapter without twisting and potentially kinking the tubing; Connect to water source, such as a hose bibb or garden hose

Fits 5/8 in. tubing and dripline with outside diameter of 0.700 in. on one end, 3/4 in. MHT connection point on opposite end

Built-in swivel makes it convenient to remove or attach adapter without twisting and potentially kinking the tubing; Filter washer inside the adapter ensures a watertight fit and screens out particles before they can clog the system

Releases water with a rotary spray in a uniform, full-circle pattern; amount of water flow is adjusted by turning the dial on the sprinkler; Ideal for watering groundcover, flower beds, planting beds, vegetable gardens, and new plantings for germination

Built-in 10-32 threaded inlet connects emitter to rigid riser

With this non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source; Increase or decrease water flow by turning the dial; delivers water gradually

Adds a 90-degree turn in your 5/8 in. supply tubing or dripline; Works in a variety of areas, from small to large, flat or sloped, to join distribution tubing in your drip irrigation system

Fits 5/8 in. tubing and dripline with outside diameter of 0.700 in.

Creates a watertight connection; has an internal barb that compresses the inserted tubing to hold it in place; unlike a barbed fitting, the tubing is not stretched out to connect to the fitting

Watering hose

Poly

Black

Branch off the main supply line to create a feeder line that supplies water to a low-flow, drip-watering device, or use as a main line in a small drip irrigation system; Works in a variety of areas, from small to large, flat or sloped; transports water to trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets

Tubing outside diameter (OD) is 0.250 in., internal diameter (ID) is 0.170. in.; connect to main supply line with ¼ in. micro fitting such as a barbed connector, connect other end directly to emitter to deliver water to plant; Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion

As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated; Tubing coil comes shrinkwrapped for convenience; easy to access as needed

SAVE TIME AND EFFORT: This plant watering kit has everything you need to get started with drip irrigation and waters up to 200 sq. ft. Use the kit to build; expand; or repair a drip irrigation system

INSTALL IN 3 STEPS: 1) Connect timer and tubing to water source; 2) Lay out tubing; 3) Use fittings to attach sprayers; Customizable system for ground cover and flower beds

IDEAL FOR ANY LEVEL GARDENER: Rasy to customize; install; and operate; Kits contain all the components you need to set up your own drip system; schedule timer for worry-free watering

1/2 INCH IRRIGATION TUBING: as a main supply line connected to a low-flow, drip-watering device; as a feeder line that branches off larger tubing or pipe; and with emitters punched into the tubing to deliver water along the line

CONNECT TO DRIP IRRIGATION PARTS: To use as a main supply line, attach to a point-of-connection device connected to the water source; to use as a feeder line, connect to the main line with a fitting; to use as a dripper line, attach emitters directly into the line

MULTIPLE USES: For trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets

Lowers incoming water pressure from a water source and filters out particulates for optimal performance of your drip system; Connects to pipe commonly used in underground valve systems

Attach the pressure-regulating filter to pipe with a ¾ in. MPT connection point; Use with a ¾ in. FPT Swivel Adapter to connect supply tubing

Attach the pressure-regulating filter to pipe with a ¾ in. MPT connection point; Periodically flush out the system by removing the flush cap, also known as a cleanout cap, and running the water; the filter can also be removed from the middle housing and pulled out to clean

Build or repair the line by connecting two sections of 1/2 in. supply tubing or dripline together; Works in a variety of areas, from small to large, flat or sloped, to join distribution tubing in your drip irrigation system

1/2 in. coupling connects 1/2 in. distribution tubing or dripline together, or connects 1/2 in. tubing to other drip irrigation parts to transport water to the area to be irrigated

Creates a watertight connection; has an internal barb that compresses the inserted tubing to hold it in place; unlike a barbed fitting, the tubing is not stretched out to connect to the fitting

1/2 INCH IRRIGATION TUBING: as a main supply line connected to a low-flow, drip-watering device. as a feeder line that branches off larger tubing or pipe. and with emitters punched into the tubing to deliver water along the line

MULTIPLE CONNECTIONS: To use as a main supply line, attach to a point-of-connection device connected to the water source. To use as a feeder line, connect to the main line with a fitting. to use as a dripper line, attach emitters directly into the line

MULTIPLE USES: For trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets

Adds height to sprinkler, sprayer, or jet to provide plants with overhead irrigation; stake positions and secures emitter in place; Use with sprinkler, sprayer, or jet to water flower beds, planting beds, vegetable gardens, trees, shrubs, and container plants

The sprinkler stake with riser lifts up the low-flow emitter, connects to tubing, and makes it easy to move and position the emitter and tubing in your drip system

Riser fits sprinkler, sprayer, or jet with ¼ in. barbed inlet or 10-32 threaded inlet; stake inlet fits ¼ in. supply tubing with 0.170 in. internal diameter (ID); Use with ¼ in. Supply Tubing to transport water to plants

Precise, even watering keeps soil moist to hydrate the plant’s root zone; Ideal for watering individual shrubs and trees in landscapes, and plants in container pots and hanging baskets

Fits ¼ in. tubing and dripline with internal diameter of 0.170 in.; 1 GPH flow rate

Non-pressure Compensating Emitter delivers water gradually; expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source

Partially pressure Compensating

Position dripper in-line with 1/4-inch Tubing

Designed for use on level ground and shorter circuits

Get started with drip irrigation with a kit that contains all the essentials you need to slowly water the soil around your plants for complete root zone hydration; Ideal for short runs on flat surfaces, such as vegetable gardens, flower beds, planter boxes, and plant rows; use the kit to set up a drip irrigation system on its own, or to expand on an existing drip irrigation system

Connect the swivel adapter preassembled on the dripline to faucet or hose bibb; position dripline near plants and stake down with included stakes; Non-Pressure Compensating Drippers have a ½ GPH flow rate

Use with a pressure regulator connected to the ¾ in. FHT X ¼ in. adapter to reduce water pressure to a manageable flow rate for drip irrigation