Best Dinkle in 2026

Assembly for Solar Combiner or Power Distribution

UL 600V Rating

UL 10-22 AWG Rating

UL 600V

UL 10-22AWG

UL 30A

EASY INSTALLATION - We provide 3 kinds of terminal blocks (3/6/10 positions), to meet your different needs of wiring on machinery, electric power, home appliance, computer or other automatic equipment. All our products are certified and inspected, and the quality is trustworthy

SAFETY DESIGN - Compared with traditional terminal strip blocks, ours’ come with protection covers to avoid accidental touching when use. We also provide jumpers to help customers distinguish positive and negative wire when installation.

RatedVoltage_V : 600V , RatedCurrent_A : 30A

The VLT6 is a revolutionary tilting TV mount. Large TVs installed on traditional tilting mounts often hit the wall, limiting the maximum tilt range.

The VLT6 extends from the wall 5.7", getting you the maximum tilt possible for your TV. The extension allows even the largest of TVs to achieve the maximum listed tilt range. More tilt translates to better glare reduction, think a better viewing experience.

Open wall plate design, allows for the VLT6 wall mount to be directly mounted over electrical outlets for a clean and streamlined look.

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

Assembly for Solar Combiner or Power Distribution

UL 600V Rating

UL 6-20 AWG Rating

Four connections with1/4" stainless steel studs and 3 x #8 stainless steel screws. Comes with 1/4” and #8 insulated ring terminals

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits

Max voltage:300V AC/ 48V DC.Max continuous amperage: 80A AC/100A DC.Max intermittent: 20A per connection

【Safety】Terminates 28-12 AWG；Rated Voltage: 250V/4KV; Rated Current: 32A. Long life, no corrosion, aging resistance, pressure resistance, high temperature and normal work. There is a test hole on the back of the compact splicing wire Connector. Test holes can be used to check if the wires are energized.

【Efficient】 No tools required in use, one plug can be used, greatly reducing the wiring work time. In fact, for home decoration, after the vertical connection terminal technology, each wire connection will save the wire length of about 500px , saving more than 80% of working hours, the comprehensive cost is greatly reduced.

【Universal compatibility】 Suitable for soft and hard single-strand and multi-strand. Widely used in lightings, fans, automatic doors and all small appliances.

Fourteen connections with 2 x 5/16" stainless steel studs and 12 x #8 stainless steel screws. Comes with 4 x 8AWG 5/16”, 4 x 10AWG 5/16”and 24 x #8 insulated ring terminals

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits

Max voltage:300V AC/ 48V DC. Max continuous amperage: 130A AC/150A DC

Four connections with M5 stainless steel studs and 3 x #8 stainless steel screws. Comes with 1/4” and #8 insulated ring terminals

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits

Max voltage:300V AC/ 48V DC.Max continuous amperage: 80A AC/100A DC.Max intermittent: 20A per connection

Two 5/16" stainless steel studs with divider for Positive and Negative connections. Comes with 2 x 4AWG & 2 x 8AWG 5/16” ring terminals, and stainless steel screws.

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits.

Max voltage:300V AC/ 48V DC. Max continuous amperage: 130A AC/150A DC.

Two connections with 5/16" stainless steel studs and 1 x #8 stainless steel screws. Comes with 8AWG 5/16” ring terminals, #8 insulated ring terminals and stainless steel screws

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits

Max voltage:300V AC/ 48V DC. Max continuous amperage: 130A AC/150A DC. Max intermittent: 20A per connection

Two connections with M5 stainless steel studs and 5 x #8 stainless steel screws. Comes with 1/4”, #8 insulated ring terminals and stainless steel screws

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits

Max voltage:300V AC/ 48V DC.Max continuous amperage: 80A AC/100A DC.Max intermittent: 20A per connection

Five connections red busbar with 5 x 3/8" stainless steel studs. Five connections black busbar with 5 x 5/16" stainless steel studs. Comes with 5 x 8AWG 3/8”, 5 x 8AWG 5/16” ring terminals.

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits.

Max voltage:300V AC/ 48V DC. Max continuous amperage: 130A AC/150A DC.

PCB Board: 30 pieces double sided PCB prototype boards in 4 different sizes, 10 pieces 2*8cm, 10 pieces 3*7cm, 5 pieces 4*6cm and 5 pieces 5*7cm PCB boards

Header Connector: 10 pieces 40 pin male header, 10 pieces 40 pin pitch right angle male headers, 10 pieces 40 pin female header; pitch: 2.54mm, single row and straight connector

Screw Terminal Block: 5 pieces 5.08-301-2P and 5 pieces 5.08-301-3P ; pitch: 5.08mm, rated voltage: 300V, rated current: 16A

STRENGTH MATTERS:A product is only as good as the materials it’s made from.The eyelet terminals are made of 100% copper that has been annealed.Provides maximum conductivity.Achieve rock-solid connections.

BUILT LIKE A TANK:The copper ring terminals surface with tinned and passivation treatment to improve conductivity.The good-quality and high-purity copper determines that it has more wear-resistant, durable and anti-corrosion properties than ordinary copper wire lugs.Even in the small details,this copper lugs stands out from the crowd - The flared design allows for visual inspection of correct insertion,making wire insertion easier.

LONG TERM RELIABILITY:Tested to UL Listed and ABYC safety standards.The haisstronica's eyelet terminals can handle voltages up to 600 Volts at 275 Degrees F.and higher currents than common copper lugs amps.Why? Because whether your working on a car,truck,boat,or RV,you what to know that your equipment can handle whatever you throw at it.

【UL Listed】 Long life, no corrosion, aging resistance, pressure resistance, high temperature and normal work. There is a test hole on the back of the connector. Test holes can be used to check if the wires are energized.

【Efficient】 No tools required in use, one plug can be used, greatly reducing the wiring work time. In fact, for home decoration, after the vertical connection terminal technology, each wire connection will save the wire length of about 500px , saving more than 80% of working hours, the comprehensive cost is greatly reduced.

【Universal compatibility】 Suitable for soft and hard single-strand and multi-strand. Widely used in lightings, fans, automatic doors and all small appliances.

Fits 42"-90" TV's

Holds up to 125lbs

Tilts -12deg -7deg

76PCS TINNED BATTERY CABLE ENDS KIT:This 3/8",5/16" ring eyelet terminals kit includes 36pcs battery terminals will work with 8,6,4,2gauge wires.40pcs 3:1 heat shrink tube(red/black).

APPLICATION:Wiring projects such as Christmas lights,ships with high waterproof requirements,off-road vehicles,ship bottom pumps, lawn tractors,RVs,fish finder,etc.We offer a 30-day money-back guarantee,and a 12-month replacement warranty giving customers a 100% Satisfaction Guarantee for risk-free purchases!

EXCELLENT CRAFTSMANSHIP COPPER RING TERMINALS:The flaring design of the battery terminals makes it easy to insert the wires and complete the crimping and can firmly crimp the cable.Tested to UL listed and ABYC safety standards.

Wire Connectors, Industry standard twist on connector. - 500 Pack.

Wire Combination Max: (4) 16 AWG w/ (1) 20 AWG.

Wire Combination Min: (1) 18 AWG w/ (1) 20 AWG.

The inner spring insert can keep the wire stable connection, which can guarantee the safety and stability of electricity when connecting and using the wire to the greatest extent.we recommend to twist the conductors first, which will make the connection more reliable and tighter.

Can be used for home theater, speaker wire, stereo wiring, automobile, ship wiring projects, home wiring projects, commercial or residential applications, etc.

Tough thermoplastic shell shields can against environmental extremes, temperature rated at 221°F (105°C) maximum.

Accommodates F-Type Connector Pins: FG6, RG58, RG59, and RG11 coaxial (750hm) Cable with wall plates for indoor and outdoor use

Innovative Design: Exposed center conductor provides "finger grip" hold - No wrench required to secure connector to F port

Outdoor and Weather Proof: Internal O-Ring weather sealed - constructed with high grade anti corrosion material compression connectors. Pack of 4

Coupler Perfect For: Combining two video cables or extending overall length of your Cable tv internet connection cable

Easy to Use: Joins two coaxial cables with male F Type connectors together. Pack of 4

Accommodates F-Type Connector Pins: RG58, RG59, FG6, and RG11 coaxial (750hm) Cable with wall plates for indoor and outdoor use

[MATERIAL] - Made of copper and plastic, which is sturdy and for long-lasting durability.

[STURDY CONSTRUCTION] - These terminal block connectors have high strength, high hardness, good wear-resistance and chemical corrosion-resistance.

[EASY TO INSTALL] - The terminal blocks are easy to install and held in place by two screw holes at both end of the terminal.

Cable size: 0.5-1.5mm²(AWG 22-16)

Max current: Imax=19A

Insulation: Vinyl, Terminal Body: Copper

Port Number: 2 / 3 ；Terminates 28-12 AWG；Rated Voltage: 250V/4KV; Rated Current: 32A; Wire Crosssection:0.08~4.0mm²(Hard wire), 0.08~4.0mm²(Soft wire).

Wiring length: 9-10mm; Shell Material: flame-retardant nylon PA66; Guide Strip: Electrolytic copper (Surface tin plating); Spring: Nickel chromium alloy steel

Selecting the best flame retardant insulating material, which is long life, no corrosion, anti-aging, pressure 4KV and against electrical shock.There are test holes on the back of the connector to check if the wires are powered on.

[MATERIAL] - Made of copper and plastic, which is sturdy and for long-lasting durability.

[STURDY CONSTRUCTION] - These terminal block connectors have high strength, high hardness, good wear-resistance and chemical corrosion-resistance.

[EASY TO INSTALL] - The terminal blocks are easy to install and held in place by two screw holes at both end of the terminal.

The package includes 500 wire connector nuts.

Simple and convenient no pre-twisted wire is required, just push the stripped conductor into the wire cap electrical and screw it on.

Cone-shaped springs pull wires into wire caps.

The package includes 500 wire connector nuts.

Simple and convenient no pre-twisted wire is required, just push the stripped conductor into the wire cap electrical and screw it on.

Cone-shaped springs pull wires into wire caps.

【Perfect DIN Rail Terminal Blocks Kit】Terminal blocks kit comes with 20pcs terminal blocks, 2pcs ground blocks, 2pcs jumpers, 4pcs E/UK end brackets, 4pcs UK-2.5BG end covers, 1pcs 8" aluminum RoHS Rail, 4pcs ZB6 Marker strip.

【Terminal Blocks UK2.5B】The UK2.5B universal screw DIN rail terminal block series has the typical features which are decisive for practical applications. Made from engineering flame retardants nylon PA66 with brass screw metal.It can connect two conductors with ease, even large conductor cross sections are not a problem. Can be used on DIN Rail 35mm, steel or aluminum.

【Ground Terminal Blocks Connectors】The grounding terminal blocks provide an easy-to-identify, convenient, neatly organized grounding bus that is mounted on the DIN rail.The protective terminal blocks has strong clamps to ensure tight fixation on DIN rails to achieve the PE function.