Best Dongyang Ind. Co., in 2026

[Made in Korea] This Handwheel has a diameter of 100mm (3.94") and a pre-machined inner diameter of 1/2" (12.75mm). It can be used immediately from Ø 1/16 to Ø 1/2. (1/4, 3/8, 5/16, 7/16, etc.) The actual inner diameter is 12.75mm, so 1/2 inch fits in smoothly. If you extend the bore with your lathe or drill press, this handwheel can accommodate shafts up to 21mm. The material of the main shaft of the handwheel is aluminum, and the exterior is made of black Duroplast.

Time, money and safety all at once. - To use the machine, We have spent time and money, buying a handle, buying a tool to process the handle. At worst, processing failed. There must have even been injuries. This "Ultimate Handwheel" ​prevents all such accidents in the first place. Have you long since lost the handle of your old machine? Now is the time to replace it. it's time to Stop turning the shaft with a monkey wrench.

Excellent user friendliness. - Unlike using handwheels with a lot of loss as above, this "Ultimate Handwheel" is built for a wide range of use in all axes with smaller than pre-machined bores. If necessary, it can be expanded to expand the scope of use. it is not diffcult. There are more people who can't do ironsmithing and metalworking than there are people who can't. made for them. Let each one do what he is good at. Leave the ironsmith to me.

[Made in Korea] This Handwheel has a diameter of 140mm (5.50") and a pre-machined inner diameter of 1/2" (12.75mm). It can be used immediately from Ø 1/16 to Ø 1/2. (1/4, 3/8, 5/16, 7/16, etc.) The actual inner diameter is 12.75mm, so 1/2 inch fits in smoothly. If you extend the bore with your lathe or drill press, this handwheel can accommodate shafts up to 21mm. The material of the main shaft of the handwheel is aluminum, and the exterior is made of black Duroplast.

Time, money and safety all at once. - To use the machine, We have spent time and money, buying a handle, buying a tool to process the handle. At worst, processing failed. There must have even been injuries. This "Ultimate Handwheel" ​prevents all such accidents in the first place. Have you long since lost the handle of your old machine? Now is the time to replace it. it's time to Stop turning the shaft with a monkey wrench.

Excellent user friendliness. - Unlike using handwheels with a lot of loss as above, this "Ultimate Handwheel" is built for a wide range of use in all axes with smaller than pre-machined bores. If necessary, it can be expanded to expand the scope of use. it is not diffcult. There are more people who can't do ironsmithing and metalworking than there are people who can't. made for them. Let each one do what he is good at. Leave the ironsmith to me.

High Reliability Handwheel Assembly - While using a hand grip that no longer has a fixing nut, Don't worry about loosening while working. It's Included strong anti loosening nuts.

Sturdy Construction - Unlike other items, the handle is molded from PA6. Very tough and strong (life expectancy of 20 years)

Quick disassembly and assembly - Assembly is completed in just 20 seconds using a Phillips screwdriver

40-year lifespan, wear, oil, and weather resistant. Avoid dropping on stone floors. Lifetime warranty for breakdowns; proper use ensures everlasting function.

Included: 1 x main revolving handwheel, 1 x handle grip (knob). Caution-Set screws are not included.

If you can properly perform the machining, this product can be applied to any equipment you have.

Our ultimate handwheel is the perfect addition to any machinery that requires precise and easy control. Its steel core of OD 3.94 and ID 1/2 inch ensures maximum strength and durability. You can count on its high-quality construction to withstand heavy use and last for years to come.

With our handwheel, you can save valuable time and money without compromising on safety. It comes pre-processed for easy installation and use, so you can get back to work quickly and with peace of mind. Whether you are a professional machinist or a DIY enthusiast, our handwheel is the ideal solution for your needs.

We designed our handwheel with your convenience in mind. It is user-friendly and customizable to fit your unique requirements. The revolving knob handle provides a comfortable grip, while the 3-point fixing screw ensures secure attachment at 120 degrees. You can adjust it to fit any size bore for maximum versatility.

[Made in Korea] This Handwheel has a diameter of 125mm (4.92") and a pre-machined inner diameter of 1/2" (12.75mm). It can be used immediately from Ø 1/16 to Ø 1/2. (1/4, 3/8, 5/16, 7/16, etc.) The actual inner diameter is 12.75mm, so 1/2 inch fits in smoothly. If you extend the bore with your lathe or drill press, this handwheel can accommodate shafts up to 21mm. The material of the main shaft of the handwheel is aluminum, and the exterior is made of black Duroplast.

Time, money and safety all at once. - To use the machine, We have spent time and money, buying a handle, buying a tool to process the handle. At worst, processing failed. There must have even been injuries. This "Ultimate Handwheel" ​prevents all such accidents in the first place. Have you long since lost the handle of your old machine? Now is the time to replace it. it's time to Stop turning the shaft with a monkey wrench.

Excellent user friendliness. - Unlike using handwheels with a lot of loss as above, this "Ultimate Handwheel" is built for a wide range of use in all axes with smaller than pre-machined bores. If necessary, it can be expanded to expand the scope of use. it is not diffcult. There are more people who can't do ironsmithing and metalworking than there are people who can't. made for them. Let each one do what he is good at. Leave the ironsmith to me.

The Ultimate Handwheel is a versatile addition to any machine, with a design that saves time and increases safety without the need for pre-processing.

User-friendly and designed for improvement, this handwheel is made to work with 1/2", 3/4", and 1" machines and has been created with extra processing in mind.

Built to last, the handwheel is weather-resistant and may even outlast your machine. It's perfect for repairs and replacements.

There's a reason this handwheel has the name ""Ultimate"". Self-centering with a three-point set screw is Immediately Useful. Try it. And you'll know what I meant by this product and how it was made

This hand wheel has a multi-axis CNC precision machined metal bore and a plastic combination for a lightweight body. Through this, durability and light weight were realized at the same time.

So far, everything that has been bothersome to use off-the-shelf handwheels has been done at the factory adjustment stage. The user will solve all the problems by simply inserting and tightening with the included set screws.

[Made in Korea] This Handwheel has a diameter of 100mm (3.94") and a pre-machined inner diameter of 1/2" (12.75mm). It can be used immediately from Ø 1/16 to Ø 1/2. (1/4, 3/8, 5/16, 7/16, etc.) The actual inner diameter is 12.75mm, so 1/2 inch fits in smoothly. If you extend the bore with your lathe or drill press, this handwheel can accommodate shafts up to 21mm. The material of the main shaft of the handwheel is aluminum, and the exterior is made of black Duroplast.

Time, money and safety all at once. - To use the machine, We have spent time and money, buying a handle, buying a tool to process the handle. At worst, processing failed. There must have even been injuries. This "Ultimate Handwheel" ​prevents all such accidents in the first place. Have you long since lost the handle of your old machine? Now is the time to replace it. it's time to Stop turning the shaft with a monkey wrench.

Excellent user friendliness. - Unlike using handwheels with a lot of loss as above, this "Ultimate Handwheel" is built for a wide range of use in all axes with smaller than pre-machined bores. If necessary, it can be expanded to expand the scope of use. it is not diffcult. There are more people who can't do ironsmithing and metalworking than there are people who can't. made for them. Let each one do what he is good at. Leave the ironsmith to me.

[Made in Korea] This Handwheel has a diameter of 140mm (5.50") and a pre-machined inner diameter of 1/2" (12.75mm). It can be used immediately from Ø 1/16 to Ø 1/2. (1/4, 3/8, 5/16, 7/16, etc.) The actual inner diameter is 12.75mm, so 1/2 inch fits in smoothly. If you extend the bore with your lathe or drill press, this handwheel can accommodate shafts up to 21mm. The material of the main shaft of the handwheel is aluminum, and the exterior is made of black Duroplast.

Time, money and safety all at once. - To use the machine, We have spent time and money, buying a handle, buying a tool to process the handle. At worst, processing failed. There must have even been injuries. This "Ultimate Handwheel" ​prevents all such accidents in the first place. Have you long since lost the handle of your old machine? Now is the time to replace it. it's time to Stop turning the shaft with a monkey wrench.

Excellent user friendliness. - Unlike using handwheels with a lot of loss as above, this "Ultimate Handwheel" is built for a wide range of use in all axes with smaller than pre-machined bores. If necessary, it can be expanded to expand the scope of use. it is not diffcult. There are more people who can't do ironsmithing and metalworking than there are people who can't. made for them. Let each one do what he is good at. Leave the ironsmith to me.

1,【 What You Get】 ----- In this kit, You will Not only get 20Pcs M6x30 Hex Shaped Star Knob Female Thread Nut Clamping Knob Grip Assortment Kit, But also get 20Pcs M6 304 Stainless Steel Hex Nuts and 20Pcs M6 Flat Washer. You can get all of these with only one purchase.

2,【Various M4 M6 M8 Thread】------- We have prepared three different sizes Stars Knob for you, Universally fit and can be used for most types of machine tools, This Kit Can definitely meet all your daily needs. Thread Type is metric thread M8/M6/M4, Thread Pitch:M8 x 1.25mm, M6 x 1.0mm, M4 x 0.7mm. please check the thread size you need before buying.

3,【 Thread Size】------- M8 x 30mm/ 0.30 x 1.5inch(D*L), M6 x 20mm/ 0.23 x 0.8inch(D*L), M4 x 12mm/ 0.15 x 0.47inch(D*L); M8 Head Dia (Approx): 38mm / 1.47inch, M6 Screw Knob Head Dia (Approx): 32mm / 1.26inch, M4 Screw Knob Head Dia (Approx): 25mm / 0.98inch.

Popular choice with smooth lines and finger grip spacing for easy turning

Contemporary Satin Textured Finish ,Scratch and Dirt resistant

Won't crack, become brittle or discolor

High Reliability Handwheel Assembly - While using a hand grip that no longer has a fixing nut, Don't worry about loosening while working. It's Included strong anti loosening nuts.

Sturdy Construction - Unlike other items, the handle is molded from PA6. Very tough and strong (life expectancy of 20 years)

Quick disassembly and assembly - Assembly is completed in just 20 seconds using a Phillips screwdriver

Modern-design Hand Wheel, polished rim. Widely used in industrial machine tools, such as milling machine, lathes, grinders etc.

Design with revolving handle, hand wheel has threaded hole for easy handle assembly.

These Hand Wheels are bored to the shaft diameter for their size, and are also tapped for a Removable Handle.

Commonly used in conjunction with 8mm trapezoidal screw ,can be used to control the slide operation manually.

Widely used in industrial machine tools, such as milling machine, lathes, grinders etc.

Design with revolving handle, hand wheel has threaded hole for easy handle assembly.

【Package Contents】：10pcs M4 x 40mm star knob screw, 10pcs M5 x 40mm star knobs, 4pcs M6 x 40mm star knob, 4pcs M8 x 40mm star knob screw, 28pcs matching fasten nuts and 28pcs flat washers. A total of 28 sets of clamping handle male screw knobs can meet your different needs.

【Sizes Details】: Thread size of hand tightening knob is M8x40mm, M6x 40mm, M5x 40mm, M4x 40mm. The head diameter of M8 star knob approx. 32mm, and the head diameter of M4/ M5/ M6*40 clamping screw knobs approx. 25mm. 📍 Please refer to the second picture for more size details.

【Durable Material】: The head of clamping screw knob is made of PP plastic, and the stud is made of quality steel with zinc plating on the surface, which is wear corrosion resistance, makes these thread replacement star hand knob tightening screw have a long service life.

This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”

Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench

The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability

MATERIAL: Made of high quality plastic, modern-design, strong insulation and durable in use.

PACKING QUANTITY: This hand wheel set includes: 1 x main revolving handwheel, 1 x handle grip(Knob), M6 mounting screws 2Pcs, wrench 2Pcs.

SUITABLE FOR: Industrial machine tools, such as milling machines, lathes, grinders, and medical equipment, etc.

3.94 inch(100mm) Hand Wheel Wheel Diameter, 12mm Bore Diameter

HandWheel w Revolving Handle, Size (Approx.) : 19 x 62mm / 0.7" x 2.4" (Max D * H)

3 Spoked hand wheel has threaded hole for easy handle assembly

Product Name : Hand Wheel w Revolving Handle ;Material : Metal+Plastic

Center Bore Diameter (Approx.) : 12mm / 0.47";Wheel Diameter (Approx.) : 125mm / 4.9"

Revolving Handle Size (Approx.) : 22 x 80mm / 0.8" x 3.1" (Max D * H);Thickness (Approx.) : 18mm / 0.7"

40-year lifespan, wear, oil, and weather resistant. Avoid dropping on stone floors. Lifetime warranty for breakdowns; proper use ensures everlasting function.

Included: 1 x main revolving handwheel, 1 x handle grip (knob). Caution-Set screws are not included.

If you can properly perform the machining, this product can be applied to any equipment you have.

【Excellent Material】- The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use.

【Standard Size】- These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle.

【Easy to Use】- The hand wheel comes with screw hole for easy handle assembly. Hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism.

HIGH QUALITY: This product is made of high quality bakelite and is durable.Wear-resistant and not easily deformed

EASY TO INSTALL: This Hand Wheel is bored to the standard shaft diameter for their size, and are also tapped for a Removable Handle.

DIMENSIONExternal diameter (Approx.) 200mm / 7.9in.Product dimension: 200*18mm / 7.9*0.7in

【Excellent Material】- The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use.

【Standard Size】- These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle.

【Easy to Use】- The hand wheel comes with screw hole for easy handle assembly. Hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism.

【Size】-Center hole dia:φ12;Handwheel dia:125mm/4.92";Material:Bakelite

【Premium Quality】-A professionally constructed handle beautifully designed to make a better handling experience. It can be used wherever manual repetitive rotational movement is required. It has semi permanent durability. The price is a little high. Because steel was machined precisely. The plastic was molded with it. In addition, it is sent directly from Korea to the United States

【Various Application】-It has high quality appearance and high versatility. It can be used not only in industrial facilities but also in shredders and manual coffee grinders. You can even use it in your child's toy car

High-quality, modern-design Hand Wheel. Beautiful chrome-plated finish with a polished rim.

These Hand Wheels are bored to the standard shaft diameter for their size, and are also tapped for a Removable Handle.

Handwheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism.

[4 terminal]:This CNC electronic handwheel has 4 terminal, the diameter is 60mm.

[Easy installation]:This handwheel is easy to install and use.

[Application]:Widely used for CNC numerical control system, such as CNC lathes, CNC grinding machines, CNC milling machines, engraving machines,etc.

Color: Blue; Material: Aluminum Alloy; Height: 22mm / 0.87 inch; Overall Diameter: 34mm / 1.34 inch; Square Mounting Port Size: 6.6mmx6.6mm / 0.26 inch x 0.26 inch

Advantage: Aluminum alloy material has a good rust resistant, good to prolong the service life. Round wheel design, easy to operate.

Instruction: Make sure the 6.6mmx6.6mm square mounting port can fit your item and then install it directly.

【Excellent Material】- The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use.

【Standard Size】- These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle.

【Easy to Use】- The hand wheel comes with screw hole for easy handle assembly. Hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism.

【Durable Material】The rear tire of the wheelchair is made of nylon, which is wear-resistant, puncture-proof and shock-absorbing，The rear wheel accessory hub is made of thickened nylon, which is durable, lightweight and easy to install.

【Easy to Install】Unscrew old wheelchair accessories and replace with new ones without specific tools.

【Practical Design】The anti-skid pattern design on the tire surface, upgrade your wheelchair to easily cope with various road surfaces, with strong grip.