Best Dskoiph in 2026

Condition: Brand new and high quality, well packed

Often used when coverting to a VTEC

Fits the Coolant Temperature Sensor on B/D/H/F Series FOR Honda and Acura Civic Engines

Aftermarket item, exactly same function as original

Package includes: 1 Pc 19106-RNA-A48 Radiator Coolant Reservoir Overflow Tank Cap w/ Joint

Aftermarket item, exactly same function as original

set of 8 USCAR EV6 EV14 fuel injector connectors with TXL cross-linked wire pigtails.

Fit many of the newer fuel injectors for the LS2, LS3, Ford, Dodge and many more.

100% Premium Automobile Synthetic Leather

Fit for Honda Pilot 2009-2013

Only The Leather Part Is Included, need to remove the old upholstery skin and install the new one.

Aftermarket item, exactly same function as original

Replace # 15815-R70-A01, 15845-R70-A01

Fits for Honda vehicles

Aftermarket item, exactly same function as original

Durable Steel design, built to strict quality control standards

Replaces Part #: 15078238 700-053 16448069-101

100% Premium Automobile Synthetic Leather

Fits for Toyota Avalon 2000-2004.

Need to remove the old upholstery skin and install the new one.

Replaces Part #：27010-1202.

The diameter of the threads is M16*1.5

Brand new in box with guaranteed quality

Fit for: 2 x 8 inch Fans, 2 x 10 Inch Fans, 2 x 12 Inch Fans, 2 x 14 Inch Fans, Single 8 Inch Fan, Single 10 Inch Fan,Single 12 Inch Fan, Single 14 Inch Fan, Single 16 Inch Fan (Two 16 inch fans, need 2 Relay Kits)

Work on 12 volt Electric Fan Wiring Harness, Relay, Sending Unit & Circuit Breaker 12V

Turn your Electric Cooling Fan ON at 185 degrees and OFF at 165 degrees

Quick-Connect fit 3/8 fitting.

Barb side fit: 3/8 in Quick Connect Adapters nylon tube

Package Includes: Pack of 2 Fuel Line Quick Connector.

Universal Fitment: for most car, truck, van, SUV.

Safety and Comfortable: especially for the elderly, child, pregnant woman, injured or anyone who needs mobility assistance

Material: This Grip Handle is made of durable and strong Nylon.

Material: This RV Roof Cover is made of solid polyethylene plastic

Fitment: for 1 to 2 3/8" diameter pipe.

The vent cap can prevent terrible odors from infiltrate your RV’s cabin through your plumbing effectively.

Replacement Part #: 8863B, 9336, 9336A, 917-327 42RLE, NAG1, 45RFE, 62TE

Compatible models: 300C, Challenger, Charger, Magnum on 2.7 , 3.5 , 3.6 3.7 , 5.7 , 6.1 , 6.4 Engines

Only use on your original came withour a dipstick

🥇🥇【Easy to use】 Supports °C/°F display.

🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.

🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.

Humidity measuring range: 5~99.99%RH; Humidity control range: 5~99%RH; Accuracy: ±3%RH

Control humidity by setting value and differential value; Delay protection for Control output; Query current temperature

Switch the modes between humidification and dehumidification automatically;Calibrate the humidity value;

WE'VE IMPROVED THE TEMP CONTROLLER: This is NOT a humidity controller! Simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now. NO WIFI connection!

HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the settings and device you plug into the controller. NO wifi connection!

MAX LOAD: Rated for 10A,1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).

✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.

✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.

✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.

Condition: Brand new and high quality, well packed

Often used when coverting to a VTEC

Fits the Coolant Temperature Sensor on B/D/H/F Series FOR Honda and Acura Civic Engines

Replacement for : 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 ENGINES

New 175 - 185 degree electric fan thermostat relay switch kit for your cooling system, It is a NPT3/8" thread.

This kit includes everything you'll need to hook up to your fan, includes a brass adapter to install the sending unit, wires, relay switch, circut breaker, terminals and mounting screws.

It does indeed read in deg F.

Can control both heating and cooling output

Has an alarm to indicate sensor failure or high temperature

Made Of High Quality - Light-Weight Aluminum

Surface With Anodized Finish To Improve Strength & Durability

Fits 38MM I.D. Hose with 1/8 NPT Threaded Water Temperature Sensor.

Package Dimension : 1.38 " L x 1.38 " W x 4.25 " H

Item Package Weight : 0.08 pounds

Country of Origin: UNITED STATES

Overall length: 2.67" / Housing length: 1.18" / Inlet & outlet: 38 millimeter

Made with solid aluminum and includes 1/8" NPT bung

Allows placement of the sensor directly in path of coolant for accurate readings

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

Package Dimensions: 15.2 L x 27.9 H x 20.3 W (centimeters)

Package Weight : 0.907 kilograms

Electrical Sockets

Professional, premium aftermarket replacement

Provides the performance and dependability you expect from ACDelco

Manufactured to meet expectations for fit, form, and function

Country Of Origin : United States

The Package Height Of The Product Is 2.731 Inches

The Package Length Of The Product Is 18.321 Inches

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

Matches OE form, fit, and function

Manufactured to exacting tolerances to ensure precise messaging to the ECU

Includes corrosion resistant terminals and coatings

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function