Best Dtacke in 2026

3pc Steel Centre Punch Set Point Metal Wood Scribe Marking Tool Ribbed Non Slip

Material: High carbon steel

Marking, punching, staking, and starting screws and drill holes

Professional Woodworking Compass, Sliding speed nut enables quick, smooth adjustments until contact with the center collar. needle point metal tips makes strong engravings and will not slip

The tip of the pencil compass has high strength, is not easily deformed, and is durable, With adjustment knob switch, you can control the grip length of the pen

Drafting compass the circle maker , great tool for making contours and circles, also used for edge marking, used with the pencil or ballpoint pen

Locking Pliers Adjustable Wear Resistant Flat Head Vise Locking Grip Plier made of high steel,durable

urface fine sand butyl nickel treatment, beautiful, wearable

Flat mouth Pliers for the fixed, tightened

The Timer Drain Valve is Used to drain water from your air tank and any other application where you want a timed operation controling fluid to an open end. Removable filter for easy cleaning.

Emission time and interval time are controlable . Shell material: Flame retardant ABS plastic,

Easy to install, fully automatic operation. Time interval (OFF): 0.5 to 45 minutes. Discharge time (ON): 0.5 to 10 seconds

Includes: 25075 3/4-Inch Brass Drift Punch Knurled

25076 1/2-Inch Brass Drift Punch

25077 3/8-Inch Brass Drift Punch

Heavy Duty - The Automatic Center Punch is made from steel that resists corrosion, wear and tear. It is durable and can provide users with satisfying results.

Automatic Mechanism - The Starrett Center Punch has an internal mechanism that automatically strikes a blow when downward pressure is applied, making it easy to use in any workshop application.

Adjustable Force - The force of the blow can be adjusted when used for different materials by turning the knurled cap. With this setting, it can create a perfect mark on any surface.

Perfect Tool Every Time - Center Punches are essential for any DIY project; They allow you to make an indentation in an object so that you can drill a hole without slipping and ruining your project

Easy to Use - Simply place the punch over the mark on your workpiece and strike with a hammer; This tool can be used for many different applications including marking drill holes, scribing lines, aligning parts and more

Convenient - Made of hardened and tempered steel, this punch is built to withstand wear and tear; The knurled round shank provides a grip for better control

Perfect Tool Every Time - Center Punches are essential for any project or home improvement! They allow you to make an indentation in an object so that you can drill a hole without slipping and ruining your project

Easy to Use - Simply place the punch over the mark on your workpiece and strike with a hammer; This tool can be used for many different applications including marking drill holes, scribing lines, aligning parts and more!

Long Lasting - Starrett Punch is made of specially selected steel; hardened and tempered, offering exceptional durability and resistance to wear and tear; It will give you satisfying and good quality results

All bars have curved ends which provide greater prying leverage when working in tight areas

Patented, two-composite, ergonomically designed handle provides a comfortable and secure grip and is oil, solvent, and temperature resistant

Metal striking cap at the end of the handle is in direct contact with the shaft allowing the user to strike the tool without damaging the handle

ST NAILSET 3PC

Tool can easily set any nail or brad without using a bulky hammer.

Compact and lightweight (about the size of a pen)

Outstanding precision and control.

Excellent for detail trim work with unrivaled precision and control. Perfect in tight spaces

Saves painters time and money

Guaranteed to be the best solution on the market

Heavy Duty - The Automatic Center Punch is made from steel that resists corrosion. The 18C model is capable of striking a much heavier blow that other sizes.

Automatic Mechanism - The Starrett Center Punch has an internal mechanism that automatically strikes a blow when downward pressure is applied, making it easy to use in any workshop application.

Adjustable Force - The force of the blow can be adjusted when used for different materials by turning the knurled cap. With this setting, it can create a perfect mark on any surface.

The pack also includes a combination 1/32" and 2/32" nail set 32r12-1

Provides 3,500 pounds of impact striking force. Great for tight spaces

Patented design is safe and easy to use

CENTER HOLE PUNCH FOR METAL: Our 5-inch automatic center punch tool is a great tool for working with materials like wood, plastic, metal, glass, and leather. Each center tool is spring loaded with an adjustable stroke and cap that accommodates any project.

COMPACT STEEL TIP: Center punches are important when it comes to marking an accurate drilling location. With the spring-driven action and hard steel awl tip, our hand-held puncher lets you mark drill holes anywhere while on the job.

SPRING LOADED CENTER PUNCH: This chrome-plated shank body withstands intense impact force, and the metal resists corrosion and damage over time. The reinforced S2 steel tip holds up to hard materials and makes surfaces ready for any nail or drill.

DRILL PUNCH TOOL: This 6-Inch Automatic Center Hole Punch is the perfect centering punch device to help start screw and drilling holes. Align the tip of this metal hole punch on a variety of hard surfaces to create center holes for fasteners.

ADJUSTABLE HOLE-PUNCH TOOL: The spring-loaded center-punch design uses spring tension that can be modified and adjusted for light or heavy marking, punching, or staking. Change the strike force any time to match the surface you are working with.

QUALITY MATERIALS: With a chrome-plated shank body and a hardened S2 steel tip, this corrosion-resistant wood-and-metal punch tool can withstand high-impact punches and force. The knurled, nonslip cap gives you a firm one-handed grip on the tool.

Great for Construction - The Starrett Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and has a knurled finger grip. Pin punches are made of hardened steel for wear resistance and strength.

Unmistakable - Each punch has the size clearly marked on the head for easy reference, so you can quickly select the right tool or identify the size you need for the job. The Brass knurled pin punch will not damage softer materials.

Secure Holding - The knurled grip provides a secure hold, so you can easily insert or knock out rivets and pins without worrying about the punch slipping. It can easily handle knocks and bumps without breaking.

Great for Construction - The Starrett Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and has a knurled finger grip. Pin punches are made of hardened steel for wear resistance and strength.

Unmistakable - Each punch has the size clearly marked on the head for easy reference, so you can quickly select the right tool or identify the size you need for the job. The Brass knurled pin punch will not damage softer materials.

Secure Holding - The knurled grip provides a secure hold, so you can easily insert or knock out rivets and pins without worrying about the punch slipping. It can easily handle knocks and bumps without breaking.

Great for Construction - The Starrett Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and has a knurled finger grip. Pin punches are made of hardened steel for wear resistance and strength.

Unmistakable - Each punch has the size clearly marked on the head for easy reference, so you can quickly select the right tool or identify the size you need for the job. The Brass knurled pin punch will not damage softer materials.

Secure Holding - The knurled grip provides a secure hold, so you can easily insert or knock out rivets and pins without worrying about the punch slipping. It can easily handle knocks and bumps without breaking.

Extra Long Pin Lengths

All Pin Punches have an 8" OAL and a 3.5" pin length (except for the 1/8 point which is 3")

Set includes 5 different point sizes: 1/8, 3/16, 1/4, 5/16, and 3/8

Includes: 22003 1/4-Inch Black Oxide Line-Up Punch

22010 1/8-Inch Black Oxide Line-Up Punch

22011 5/32-Inch Black Oxide Line-Up Punch

Includes: 24548 7/16-Inch Bearing Race Punch

24549 1/2-Inch Bearing Race Punch

24550 5/8-Inch Bearing Race Punch

Holds punches and chisels up to one inch in diameter reducing the risk of injury

Nylon insert absorbs shock

Large four-sided handle

Perfect Tool Every Time - Center Punches are essential for any project or home improvement! They allow you to make an indentation in an object so that you can drill a hole without slipping and ruining your project.

Easy to Use - Simply place the punch over the mark on your workpiece and strike with a hammer. This tool can be used for many different applications including marking drill holes, scribing lines, aligning parts and more!

Long Lasting - Starrett Punch is made of specially selected steel, hardened and tempered, offering exceptional durability and resistance to wear and tear. It will give you satisfying and good quality results.

Made in the USA

6 Solid punch, 6 pin punch, 1 prick punch and 2 center punch

Used for cutting, shaping and removing metal softer than cutting edge of the chisel

3/32-1/2" by 64ths and 11/32"

Undersize . 0025". 4-7/8" Long.

Heat treated tempered tool steel for longer life

DIMENSIONS: 9.75" L x 5.25" W x 2" D

NON-DESTRUCTIVE: Chrome plated steel hammer has nylon and brass heads to ensure strong, but non-marring contact while in use

BE PREPARED: Features brass, steel and nylon solid punches making it the ideal kit for your workbench

Ground and polished surface

Safety impact head

Special tool steel

Manufacturer: Stanley Black Decker Inc

Perfect Tool Every Time - Center Punches are essential for any DIY project! They allow you to make an indentation in an object so that you can drill a hole without slipping and ruining your project.

Easy to Use - Simply place the punch over the mark on your workpiece and strike with a hammer. This tool can be used for many different applications including marking drill holes, scribing lines, aligning parts, and more!

Convenient - Made of hardened and tempered steel, this punch is built to withstand wear and tear. The knurled round shank provides a grip for better control.