Best Dunkteam in 2026

[ How to connect wires ? ] 1-Connect to +9-32VDC; 2- Connect to Ground(-); 3- Connect to Signal Input; 4- Not Connected; 5- Blacklight(+9-32VDC)

[ How to install it ? ] Open a hole of 52mm (2 1/16") in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. Put the gauge in the hole and screw down.

[ Work Signal ] 0-190 ohm , please make sure your fuel sensor signal is 0-190 ohm.

[ How to connect wires ? ] Red wire connect to +9-32VDC; Blue wire connect to Ground(-); Black wire connect to Signal Input; Orange wire connect to Blacklight

[ How to install it ? ] Open a hole of 52mm (2 1/16") in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. Put the gauge in the hole and screw down.

[ Back Light ] 7 different backlight adjustable. Red, Green, Blue, White , Yellow, Grass, Orange, Purple, Auto

[ How to connect wires ? ] Red wire connect to +9-32VDC; Blue wire connect to Ground(-); Black wire connect to Signal Input; Orange wire connect to Blacklight

[ How to install it ? ] Open a hole of 52mm (2 1/16") in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. Put the gauge in the hole and screw down.

[ Back Light ] 7 different backlight adjustable. Red, Green, Blue, White , Yellow, Grass, Orange, Purple, Auto

[How to install it ? ] Open a hole in the panel (Dimension -85mm / 3 3/8", Depth-2-3/4") , Then put the gauge in the hole and screw down.

[How to adjust backlight? ]Power on, then press the back SET button for 2 seconds, the backlight color will change in this order: Red(Default)-Green-Blue-White-Yellow-Kelly-Orange-Purple. Auto mode and Fix mode.

[How to use "TRIP01" "TRIP02" "COG"?] Press the back "MODE" button for 3 seconds to switch "TRIP01", "TRIP02" or "COG". "TRIP01"(Default): hour will be automatically cleared after power off, the data will not be saved;- "TRIP02": hour will not be automatically cleared after power off. Users need press the back "SET" button for 3-5 seconds to clear.

[ How to connect wires ? ] Connect to +9-32VDC; 2- Connect to Ground(-); 3- Connect to Signal Input; 4- Not Connected; 5- Blacklight(+9-32VDC)

[ How to install it ? ] Open a hole in the panel (Dimension -85mm / 3 3/8", Depth-2-3/4") , Then put the gauge in the hole and screw down.

[ Work Signal ] Tachometer sometimes cannot get signal by ignition system. Please make sure you have a speed sensor on your motorcycle. Note: If your speed sensor is installed on the flying wheel panel, the RPM ratio is equal to the number of gears of the engine;

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 8.73 mm (0.34 inch), Outer Diameter: 14.22 mm (0.56 inch)

Working Temperature: -40°F to +300°F

Net Weight: 8oz (227g) per cartridge

Height: 7. 25” Diameter: 2. 6”

Cartridge has a Notched Collar providing easier alignment in portable gas burners!

ID: 3/8inch (10mm),OD: 2/3inch(17mm).Material: NBR.

Working Pressure: 300psi. Burst Pressure: 1160psi. Temperature Range: -40°F to 257°F. Minimum Bend Radius: 3.9inch(100mm).

Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air,etc.

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 11.12 mm (0.44 inch), Outer Diameter: 17.2 mm (0.68 inch)

Working Temperature: -40°F to +300°F

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 5.56 mm (0.22 inch), Outer Diameter: 11.17 mm (0.44 inch)

Working Temperature: -40°F to +300°F

ID: 1/2inch (13mm);OD: 0.75inch(19mm).Material: NBR.

Working Pressure: 217psi.Max Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 4.7inch(120mm).

Applicable Medium: 1/2 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc.

ID: 3/8inch (10mm);OD: 2/3inch(17mm).Material: NBR.

Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 3.9inch(100mm).

Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc.

25 Feet of multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line

Can be used with unleaded gasoline, diesel fuel, gasoline blends of ethanol (E-10), E-85 and sour gas

Inner Diameter (ID): 5/16" (.3125") | Outer Diameter (OD): .56"

ID: 5/16". OD: 0.43inch.Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 3000 psi. Bursting pressure: 10000psi.AN6 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.

Applicable Medium: 6AN e85 fuel line works with all automotive fuels, lubricants, and coolants.

ID: 13/32". OD: 0.543inch. Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 2500psi. Bursting pressure: 8000psi.AN8 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.

Applicable Medium:8AN e85 fuel line works with all automotive fuels, lubricants, and coolants.

ID:5/16". OD:0.465inch. Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 3000psi. Bursting pressure: 10000psi.AN6 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.

Applicable Medium: 6AN e85 fuel line works with all automotive fuels, lubricants, and coolants.

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 8.73 mm (0.34 inch), Outer Diameter: 14.22 mm (0.56 inch)

Working Temperature: -40°F to +300°F

ID: 3/8 inch, OD: 5/8 inch, 6 AN NBR liner hose fuel injection 5 feet

Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines

Working Pressure 2Mpa. Burst Pressure 6Mpa, Handles temperature ranges of -40 to +275 degrees F

The more an engine is driven, the more carbon deposits can build up on fuel injectors, intake valves and ports

Gumout High Mileage Fuel Injector Cleaner is specially formulated to remove carbon deposits from engines with more than 75,000 miles

Cleans fuel injectors, intake valves and ports to restore performance, fuel economy and prevents future carbon build-up, which reduces emissions

ALL-IN-ONE FUEL: Ditch the gels, bars, chews, and pills and go all day with just Tailwind. Tailwind mixes with water to meet your calorie, hydration, and electrolyte needs, no matter how big a day’s in front of you.

NO GUT BOMBS: Sipping Tailwind provides steady, small doses of fuel that pass right through the stomach. The composition of Tailwind’s fuel matches what the gut is made to absorb, so Tailwind enters your system quickly, without taxing the digestive tract and causing stomach issues.

TASTY ALL DAY: If you don't like the taste, you won't drink it. That's why Tailwind has light, clean flavors that taste better the longer you go.

[Size] ID of 10an fuel hose:0.56"(14.22mm),OD:0.78"(19.8mm). Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F(-40°C to 125°C); Min bending radius:101.6mm.

[Application] 10AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.

[Size] ID of 6an fuel hose:0.34"(8.63mm),OD:0.54"(13.71mm).Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F (-40°C to 125°C);Min bending radius:63.5mm.

[Application] 6AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel,etc.

Nylon Braided CPE Fuel Line: Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.

Universal Application: The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes.

Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance; The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.

[Size] ID of 10an fuel hose:0.56"(14.22mm),OD:0.78"(19.8mm). Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F(-40°C to 125°C); Min bending radius:101.6mm.

[Application] 10AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.

[Size] ID of 8an fuel hose:0.43"(10.9mm),OD:0.64"(16.25mm). Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F(-40°C to 125°C); Min bending radius:88.9mm.

[Application] 8AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.

Provides easier and more reliable starts

Remains stable 2 years in the tank and 5 years in the sealed container

Extends engine life and improves the performance of outdoor power equipment

ID: 3/4 inch / 19mm, OD: 1.1 inch / 28mm, 12 AN NBR liner hose, 5 feet

Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines

Working Pressure 2Mpa. Burst Pressure 4Mpa, Handles temperature ranges of -40 to +275 degrees F

ID: 5/8 inch / 16mm, OD: 0.9 inch / 23mm, AN10 NBR liner hose, 5 feet

Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines

Working Pressure 2Mpa. Burst Pressure 4Mpa, Handles temperature ranges of -40 to +275 degrees F

1.5 feet of fuel injection hose designed specifically for auto and truck fuel injection systems

Can be used with gasoline, ethanol, extended gasoline, oxidized sour gas, diesel fuel, biodiesel (B5, B10, B20) and lubrication oil

Inner Diameter (ID): 5/16" (.3125") | Outer Diameter (OD): .56"

For meausring fuel pressureFor meausring fuel pressure, automotive air line pressure or automotive sensor transmission, T-Fitting adapter allows users to install in the fuel line

Size: 1-1/2" dial size, center back, 8mm (5/16") Brass Barbed T-Fitting Adapter, 2 Stainless Steel Clamp with handle

Pressure Range: 0-15psi single scale