Best Duravolt in 2026

NO EXPERIENCE Plug & Play design - Free Ring Battery Adapter Included - Free Tech Support.

Self-Regulating - Batteries rated 50 Amp Hours or more a solar regulator is NOT needed.

Semi-Flex NOT Bendable, BEWARE bendable panels can crack the fragile solar cells.

NO EXPERIENCE Plug & Play design

Free Ring Battery Adapter Included- Free Tech Support

Self-Regulating - Batteries rated 25 Amp Hours or more a solar regulator is NOT needed

Meet the GEN5X1 - Similar to our GENM1, only better. It's 37% smaller and delivers 43% more power. It's one of the best performing onboard marine battery chargers we have ever made.

Multiple banks - A one-bank onboard battery charger rated a 5-amps - 5-amps per bank - for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries.

Charging modes - Independently charge and control each battery bank with selectable charging modes - including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode - for all types of lead-acid and lithium-ion batteries.

50AMP

Water Proof

Splash & Dust Proof

Trolling motor power plug 2-prong

12-, 24-, or 36-volt power plug

Power plug provides a solid, safe connection for trolling motors

PERFECT SOLUTION - Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S

FIT - The Bullnose Rudder is a boat rudder that fits a 1 1/8" (1.125") transom trolling motor shaft. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5" high x 4.75" wide and fits a 1 1/8" shaft diameter. It's most commonly used for "but not limited to" minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more.

ESSENTIAL - In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, “it prevents the boat from spinning as much when the motor is off”. Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install and you are ready to go.

Narrow streamline shape

Quick, precise control

Eliminates drag

6-inch long wire harnesses with butt connectors

Advanced design ensures both easy installation and all-weather dependability

Male plug (motor side) equipped with wing tabs for easy installation and removal

1 pcs of male boat side socket + 1 pcs of female boat side socket boat side connector

High impact plastic for durability.

3-wire designed with butt connectors

70A continuous rating

Universal design for 2 or 3-wire configuration 12V, 24V, 12/24V, 24/36V, 36V or 48V systems

Corrosion resistant, plated brass electrical components

Efficient power: 46lb Thrust - this 12v electric trolling motor provides excellent power and efficiency for any boater. The high quality build allows the motor to run all day long without overheating, or making noise to spook fish.

Features: This motor features a 30 inch shaft, a 5 LED battery meter, a 6 inch telescoping tiller handle, and 3 blade propeller. The mount angle, height, and direction can all be adjusted and locked into place when needed.

Speed: 8 speed motor, 5 forward & 3 reverse. Motor is designed for trolling, with a top speed of 3.5mph, exact top speed depends on boat shape, weight, water, wind, & other factors. 3 blade prop provides great low end torque to get the boat moving.

EXTERNAL BATTERY PORTS - Safely and easily connect your trolling motor or accessory to the battery ports without opening the box.

DUAL INTEGRATED CIRCUIT BREAKERS - Integrated with 10 Amp and 60 Amp circuit breakers to protect your trolling motor and other accessories from electrical damage.

DIRECT USB CHARGER AND ACCESSORY PORT - Provides one USB Charger and one 12V accessory port for convenient connection of various DC accessories.

Kayak Shaft: 24-Inch Fiberglass Shaft Allows For Variable Depth Placement, While Offering A Lifetime Of Dependable Performance

Variable Speed: 8 Speeds (5 Forward & 3 Reverse) With 6-Inch Telescoping Handle Puts You In Total Control Of Your Ride

Saltwater Rated: Durable All Aluminum Motor Head W/ Corrosion Resistant Magnesium, Zinc, And Stainless-Steel Hardware For Saltwater Use (Lead-Acid Dc 12V)

45" Shaft, 24v, 80 lbs Thrust

Universal Sonar 2: Keeps your transducer and wiring completely concealed and protected, running everything through the trolling motor's shaft, with shielded connectors

i-Pilot GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen

Allows trolling motor to be quickly removed from and reattached to boat deck

Side screw design attaches trolling motor to top bracket and slides into deck-mounted bottom bracket, secured with tightening screw

Solid, anodized aluminum construction

Stops cord and handle breakage

Full grip cushioned handle

42" stainless steel cable with nylon jacket

SLOWS TROLLING SPEED - Slow your boat to as low as 1 MPH for the ideal trolling speed

DAMAGE-RESISTANT DESIGN - The patented hinged plate design flexes upward to prevent damage to the plate under accidental acceleration

EASY INSTALLATION - Mounts directly to the cavitation plate of your outboard or outdrive, a few inches behind the propeller

Fits Minn Kota cable steer bow-mount motors

Ergonomic soft-grip handle

Durable, abrasion resistant 48" nylon rope

Comes with: 10ft Red & black 8 Gauge cables | connecting hardware | electrical tape

Allows for the quick and easy lengthening of motor wires without impacting the performance of the trolling motor

8 Gauge cable ensures there is no performance loss through the extended Battery cable between the Battery and the trolling motor

control speed, steering and prop on/off on your power drive trolling motor

installs easily with plug-n-play design

plug included

This battery box / power center contains easy access external battery terminals that allow trolling motor leads and charger leads to be connected to the battery posts without opening the box

Protects your battery (not included) on a small boat, transom application (boats that do not have battery compartments)

Built-in, push button battery meter with 4 LEDs displays current “state of charge”

COMES WITH: 5ft Red & Black 8 Gauge cables | Connecting hardware | Electrical tape

Allows for the quick and easy lengthening of motor wires without impacting the performance of the trolling motor

8 Gauge cable ensures there is no performance loss through the extended Battery cable between the Battery and the trolling motor

The Minn Kota Terrova features an easy-to-deploy system of fallaway ramps that effortlessly slide the trolling motor into the water, plus a spring-loaded Lift-Assist design for easy stowing.

A low-profile electric foot pedal offers two steering options (heel/toe pedal and left/right steering buttons) and includes Spot-Lock activation, rotary speed control dial, momentary/constant on toggle, and AutoPilot on/off toggle.

Using GPS to lock onto fishing spots with Spot-Lock, record paths, and command speed, the i-Pilot Link system allows you to control your motor from the touchscreen remote or from a virtual remote on your Humminbird fish finder (sold separately).

VARIETY OF SPEED: Includes five forward speeds and two reverse speeds

WEEDLESS DESIGN: Weedless three-blade propeller designed to allow your boat to move easily through the water and weeds.

COMPATIBILITY: Suits various styles of small watercraft including kayaks, canoes, inflatables, Jon boats, and more.

【Wide Applicability】The marine trolling motor plug receptacle are universal design for 2-wire configuration 12V, 24V, 24/36V, 12/24V, 36V or 48V systems up to 50A continuous rating. Compatible with 6/8/10 AWG large gauge wire without overheating.

【Essentials for Trolling Motors】The trolling motor plugs and sockets are designed for harsh marine environments, and are ideal for trolling motors, lowering devices, electric fishing reels or any other DC-powered equipment.

【Convenient】Marine plug and receptacle has the best design, which is very easy to use and self-locking. You will feel easy to use this plug because of the ergonomically contoured handle design. This set adopts direct insertion systems. Time and effort saving.

BEST CHOICES FOR TROLLING MOTORS: This plug and receptacle set will work perfectly for marine trolling motors. The unique design plug and receptacle could connect trolling motor and power supply stable. A self-locking design could prevent the plug from suddenly breaking off. It will have the best performance to make the boat easy to work on and ensure your safety because of high-quality materials.

PREMIUM MATERIAL: You will see the Corrosion-resistant, Brass gold-plated electrical components. The trolling motor plug and receptacle has the ability of IP67 waterproof, flame retardant, and high-temperature resistance. It can help to connect in any freshwater or saltwater application. Its weatherproof feature makes it durable will keep you safe and protect your boat in extreme weather. It will provide the best service for you.

RELIABLE & CONVENIENT: Marine plug and receptacle has the best design, which is very easy to use and self-locking. It has a watertight sealing cap and a gasket to enhance the ability to be waterproof. You don't need to worry about the trolling motor plug will be lossen when the sea has extreme weather. Also, You will feel easy to use this plug because of the ergonomically contoured handle design. This set adopts direct insertion systems. Time and effort saving.

2 quick-connect plugs - one for boat/battery and one for trolling motor or other device

1-1⁄2” round hole adaptor

U-bracket

EFFICIENT POWER: 40lb Thrust - this 12v electric trolling motor provides excellent power and efficiency for any boater. High quality components allow the motor to run all day long without overheating, or making noise to spook fish.

EATURES: This motor features a 36 inch fiberglass shaft, a 10 LED battery meter, a 6 inch telescoping tiller handle, 30 degree adjustable head, and 3 blade propeller. The tiller angle, as well as mount, height, angle, and direction can all be adjusted and locked into place when needed.

SPEED: This motor has 8 speeds, 5 forward and 3 reverse. The motor is designed for trolling, so the top speed of this motor is about 4mph, but depends on your boat shape, weight, water, wind, and other factors. Our 3 Blade Propeller gives the motor great low end torque to get the boat moving.

For PowerDrive V2, PowerDrive and Riptide SP motors with the CoPilot system (sold separately) installed

This replacement wireless remote gives you control of steering, speed and prop on/off from anywhere on the boat

System is programmable to allow multiple CoPilot remotes to be “learned” (up to 10 total, sold separately).

Machined from 6061 Billet Aluminum

O-ring dampens noise/vibration and secures nut

Wider contact area for a more stable prop