Best E-Simpo in 2026

10pcs/lot For GX23 Only, Not for G23, G24d, GX24d which are also 2P. Allow You Install Standard E26/e27 bulb into GX23 Socket

Flame Retardant PBT, Phosphor Bronze.Suit for GX23 socket,Physically change the contact, don't change voltage.

All pin-based CFL, like GX24Q G24 GX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated. ballast is a must to start a high voltage(600V-1500V 1ms) to light up the CFL, but it is dangerous for LED Lamp. Because LED Lamp are built with LEDs and Driver which is transforming the 100-240V AC to DC for LEDs. So the LED Driver input should be 100V-240V or 85-265V, so 600-1500V will be too high, and easily destroy the led lamp.

4pcs/lot, GX23 Lamp base to E27 light sockets/holder adapter Not for G23, G24d, GX24d which are also 2P. BUT GX23 is Double Tab.2P in Parallel

Works with LED / Halogen / CFL light bulb lamps. Works for 2-Pin CFL with GX23 Base: 13w Single Tube; and GX23-2 Base:13w Quad Tube

Flame Retardant PBT, Phosphor Bronze.100-250V workable,Physically change the contact and socket, DON'T Change any voltage

4pcs/lot, Suit for G23, 2pin socket.2p is in parallel, not in cross(that is G24 2P in Cross), Need BYPASS OR REMOVE the ballast, otherwise, it doesn't light on.

Physically change the contact, don't change voltage.

All pin-based CFL, like GX24Q G24 GX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated. ballast is a must to start a high voltage(600V-1500V 1ms) to light up the CFL, but it is dangerous for LED Lamp. Because LED Lamp are built with LEDs and Driver which is transforming the 100-240V AC to DC for LEDs. So the LED Driver input should be 100V-240V or 85-265V, so 600-1500V will be too high, and easily destroy the led lamp.

12pcs, Suit for 2P CFL G24D-1,G24D-2,G24D-3, GX24D-1, GX24D-2, GX24D-3, 2pin socket, Need BYPASS OR REMOVE the ballast, otherwise, it doesn't light on.G24d, not GY24d, both are 2p in cross(not in parallel) but Pins position are opposite. please check Picture 2 carefully for the different base type.

D means Double Pin, 2p is in cross, not in parallel (that is G23 2P in Paralle),G24D Series (Female Socket Fixture) to E26 (Male Bulb Base) Adapter-D series has a Higher tip(21.8mm) than Q series(15.5mm).Please double check before you buy.

Physically change the contact, don't change voltage. If you don't know how to remove or don't plan to ask an electrician to remove the ballast, please DO NOT BUY!THE BALLAST IN YOUR FIXTURE MUST BE REMOVED OR BYPASSED FOR THESE ADAPTERS TO FUNCTION PROPERLY. CONSULT AN ELECTRICIAN IF YOU ARE UNSURE. DO NOT OPERATE A LED BULB WITH A BALLAST IN THE FIXTURE, DOING SO WILL LIKELY DAMAGE THE BULB.

20pcs/lot 2.54mm 4P PCB Terminal Block

Rated Value : UL AC 150V 6A IEC 130V8A Poles : 4P

Wiring Range: 24-12AWG

2pcs 3W G23 LED Bulb, used to replace G23 CFL PLS-7W

Can Work with INDUCTANCE/magnetic Ballast, BUT CAN NOT work with Electronic Ballast,so if the fixture has an Electronic ballast directly, Please Remove/Bypass the ELECTRONIC ballast First!

Size: 3W 107mm/4.2"*D27mm/1.0" Designed to replace PLS-7W (Confirm acceptable length before ordering);

6pcs/lot E12 to E26/E27 adapter

E12 Candelabra to E26/E27 Standard (medium) bulb adapter

Works with incandescent,CFL and LED bulbs

6pcs/lot Candle Lamp E12 to E14 Adapter, E12: Male Part, E14: Female Part

Allow You Install E14 EU Standard Candelabra Lamp into E12 US Standard Candle Lamps fixture/Socket.

Suitable for all voltage, physically change the America E12 (candelabra) lamps fixture to the Europ Standard Chandelier E14 lamp socket.

10pcs 40Poles Breakable to any Pin, Round Male Pins Header

SIP Single Row Gold-Plated.

Total Pin Height: 11.96mm, Hole Round Male Pin Header

Suit for GX23 socket, install Screw-in (E26 or E27) LAMP

Flame Retardant PBT, Phosphor Bronze,Max Temperature 140 celsuis degree

All voltage workable: 100-250V AC,Max Temperature 140 celsuis degree

6pcs G10Q Lampholder Light Socket

Suitable for LED, Incandescent , CFL lamp

All Voltage workable, Rated 250V40W

1-Pack, Warm White, 3W Size: Dim 48mm/1.89in*H44mm/1.73in, Cutout 34mm/1.34in. LOW VOLTAGE UNDERWATER LIGHTS - Warm white color light, 280 Lumens per one, operate with DC 12-24V.

IP68 Waterproof and Dustproof, Can be used underwater, in swimming pool, pond, fountain boat.

6063 Aluminum + USA CREE brand LED chip(3 Watt-Energe Saving, 280 Lumens-Proper Brightness, RA>80 - Good Color Restoration, 30000H - long-life span)

6pcs/lot E11 to E12 Adapter, High quality E11 to E12

Suitable for all voltage, physically change the e11 lamps fixture to the e-12(candelabra) lamp socket.

Suitable for all kinds of bulbs: LED Halogen CFL Light Bulb Lamp Adapter

10pcs/lot, E11 to E11 Socket Adapter/Extender, product no problem, please confirm your bulb base type before purchase.

increase light from a recessed light fixture, high quality E11 to E11 adapter.

All voltage workable: 100-250V AC

2pcs Waterproof E39/E40 Screw Lamp Light Socket,Widely used in Livestock Veterinary Farm Light Socket

Porcelain Lamp Holder, Aluminum Housing, High Temperature Resistant 100-250V6a 500w 300Celsuis Degree

E26/E27, E39/E40 Optional, please choose the right lamp holder according to your lamp

Price is for 9pcs*1W Mini Downlight +1pc LED Driver as a set

Lumens: 98lm*9pcs,Cutout Hole 25mm

IP Rating IP42, Indoor Use

6pcs Waterproof E26 E27 Screw Lamp Light Socket

PVC Housing, 100-250V AC 4A 160（℃）

with 2 * 10cm/4inch long Pigtail Leads with high quality VDE copper wire.

50pcs. 25pairs per lot, T8 to T5 converter,

Allow you install T5 4ft/1165mm fluorescent tube into T8 socket

Only for CFL Fluorescent tube, NOT for LED which are usually wider in Dimension

6pcs E17 to Gu10 Light Socket Adapter

Allow you install Gu10 CFL/Halogen/LED Lamp into E17 Lamp fixture/socket

All voltage workable: 100-250V AC

Premium Extension Cable: Amazing high-quality Extension Hanging Lantern Cord Cable with a total length of 12 feet. With a gear switch to control (1.5ft/0.5m long from the switch to the plug). Max power is 360 Wattage, working voltage range: 110V-250V. If you need 15ft or 20ft hanging lantern cord cable with on/off button (2-pack), please search ASIN: B079FHFK8N, B079FFN53L

UL Product: All parts of this product are strictly UL approval. It's made of extra durable materials that will stand out for a long time. 100% safe from fire, unlike many other Extension Cables here on Amazon. Works with any type of E26/E27 bulb perfectly. With 2-Prong US AC Power Plug. In order to avoid long-time high-power work to shorten the product's life, we recommend that customers try to avoid using high-wattage bulbs in sealed lamps.

Convenient Usage: Lightweight and easy for anyone to use. We prepare 4 ceiling hooks and 4 cord hooks for hanging. It's simple to install the bulb without any tools. Control option which you can turn on and off easily just simply slide the gear switch on the cable.

Lighting For Lower Spots: This 12ft hanging lamp cord features a ON/OFF switch closer to the bulb end, which is intended for lighting at lower locations like desk lamps, night lights, floor lamps, plant lighting. For hanging lights from ceilings and other higher spots, please go with another 12ft model with the switch near the plug by searching asin B08CDW21QV.

UL Listed: The whole cord, from the 2-prong AC plug to the E26 socket, are UL approved. The hanging cable works with any type of E26/E27 bulbs. Tip: To prolong the product’s lifespan, please avoid using high-wattage bulbs that can overheat the socket.

Easy Setup: Just screw in a E26/E27 bulb in the socket and plug in. Each cord is supplied with 2 S hooks and 2 J hooks for hanging up in minutes.

Heavy duty 42 lb. mounting screws supplied

Largest volume offered in device boxes

Vertical and horizontal mounting

Premium Extension Cable: Amazing high-quality Extension Hanging Lantern Cord Cable with a total length of 12 feet. With a gear switch to control (1.5ft/0.5m long from the switch to the plug). Max power is 360 Wattage, working voltage range: 110V-250V. If you need 15ft or 20ft hanging lantern cord cable with on/off button, please search ASIN: B078W48D7K, B078W3NL4B

UL Product: All parts of this product are strictly UL approval. It's made of extra durable materials that will stand out for a long time. 100% safe from fire, unlike many other Extension Cables here on Amazon. Works with any type of E26/E27 bulb perfectly. In order to avoid long-time high-power work to shorten the product's life, we recommend that customers try to avoid using high-wattage bulbs in sealed lamps.

Convenient Usage: Lightweight and easy for anyone to use. We prepare 2 ceiling hooks and 2 cord hooks for hanging. It's simple to install the bulb without any tools. Control option which you can turn on and off easily just simply slide the gear switch on the cable.

Adapter – Transform a light socket into a 2-prong polarized outlet when you need one with the Power Gear Polarized Handy Outlet

Easy to Install – Turn off the light fixture, remove existing bulb and simply screw the adapter securely before inserting a polarized plug

Convenient – Use in a space that might not have an outlet where you need it most like in your garage, workshop or shed

Convenient Switch: Total length 20ft, with an ON/OFF switch to control (4.9ft/1.5m long from the switch to the plug, it is very convenient for you to control the switch). Unlike other brands with the switch in the middle of the cord cable, which is too high to touch. Max power is 360 Wattage, working voltage range: 110V-250V.

UL Product: All parts of this product are strictly UL approval.100% safe from fire, amazing high-quality Extension Hanging Lantern Cord Cable, it's made of extra durable flame-resistant material that has a long lifespan. Works with any type of E26/E27 bulb perfectly. With 2-Prong US AC Power Plug. In order to avoid long-time high-power work to shorten the product’s life, we recommend that customers try to avoid using high-power bulbs in sealed lamps.

Easy to Use: Lightweight and easy for anyone to use. It's simple to install the bulb without any tools. Control option which you can turn on and off easily just simply press the button on the cable. We prepare 6 ceiling hooks and 6 cord hooks for hanging.

Convenient Switch: Total length 20ft, with an ON/OFF switch to control (4.9ft/1.5m long from the switch to the plug, it is very convenient for you to control the switch). Unlike other brands with the switch in the middle of the cord cable, which is too high to touch. Max power is 360 Wattage, working voltage range: 110V-250V.

UL Product: All parts of this product are strictly UL approval.100% safe from fire, the item will both fit with any E26/E27 bulbs. 2-Prong US AC Power Plug. In order to avoid long-time high-power work to shorten the product’s life, we recommend that customers try to avoid using high-power bulbs in sealed lamps.

Easy to Use : It's simple to install the bulb without any tools. Control option which you can turn on and off easily just simply press the button on the cable. We prepare 3 ceiling hooks and 3 cord hooks for hanging.

[ Application ] - JACKYLED GU24 to E26 adapter can be used to transform your GU24 fixture to fit any standard screw based E26/E27 medium size bulb of any type easily. If you need 4-pack, 6-pack, 15-pack , please search ASIN: B007HA3UYE, B00IJSJK6A, B00KXTCTKM.

[ Safety ] - GU24 light bulb adaptor is made from fireproof material PBT with a fire resistance rating of UL94 V-0. It is 392℉/200℃ heat resistant with no flame hazard. Please do not use with incandescent bulbs in enclosed fixtures.

[ Parameters ] - The JACKYLED GU24 adapter can be safely used within the maximum wattage: 150W and the maximum voltage: 250V.

Sturdy and Durable: The well-constructed and high quality design of each 15 feet light cord is suitable with E26 socket. Each lamp socket also fits into different type of lamp shades as an indispensable part of your home decor!

Fits Everywhere:You can mount this vintage edison lighting cord set to brighten up your bedroom, living room, hobby room, garden, or your home office. This lighting solution serves for anywhere to build room lights with ease.

Great for Events: Besides creating a kitchen, bedroom, or a living room decor, you can carry your lights wherever you want! Utilize them to lighten your house party, dinner at the garden, or your yoga flow at the home studio.

【Brighten Your Home】 - These E12 to E26 adapters are perfect for those who own E12 light socket fixture but want to use brighter E26 bulbs. Just screw these adapters into the E12 light fixture and screw the E26 bulbs into the adapters, you will get a brighter room without changing the light fixture.

【Specifications】 - The max wattage of this E12 to E26 light bulb adapter is up to 150W and the voltage range of it is 90V - 220V, meets your need for different lighting effects, ideal for ceiling fans or lights with candelabra sockets such as chandelier, desk lamp, wall light, pendant light, etc.

【Better Electrical Conductivity】 - This light bulb socket adapter comes with copper contact inside, more stable and efficient than the normal aluminum core, no flame hazard or electric shock. Ensure your electricity safety.

Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W; Max Voltage: 600V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more.

UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 100% safe from fire hazard, durable even after years of use.

Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 18 AWG Wire. Just connect the wires (not included), plug the tube in and twist, a plug-and-play solution for your lighting projects.