Best E30 in 2026

Overall Fork Width: 27"

Overall Fork Length: 45"

Capacity: 3000 Lbs.

【PREMIUM AND DURABLE RUBBER】: The pallet jack chock is made of high-quality rubber. The wheel gear is resistant to oxidation, has a high bearing capacity, is resistant to friction, and is durable.

【ANTI-SLIP CHASSIS】: Scientifically designed pallet stopper with anti-slip bottom. No matter what the environment and the weather, it can better avoid the danger of rolling.

【STABILITY】: Fix the wheel in the hole of the heavy-duty pallet jack chock belt to maintain the stability of the vehicle and cargo and avoid damage.

pallet jack stop, jack stopper, heavy duty jack stop

EFFORTLESSLY PULL PALLETS: Attach this heavy duty pallet puller to any pallet (wood, polyethylene plastic, steel, aluminum, cardboard, etc.) in order to drag it to the rear of a trailer for easy forklift truck access; Puller has a single scissor design to allow for a wide jaw opening; 10 teeth on either side of jaw to easily grab pallets; As you pull, the puller will increase the grip on the pallet plank for safe movement; For pulling only; Not intended for lifting

LARGE SIZE: Rated to pull 6,000 pounds (2,722kg) of cargo across a smooth surface or floor; 6-inch (15.2cm) jaw opening (measured from tooth point to tooth point) opens wide enough for large jobs; 2.9-inch x 1.9-inch (7.4cm x 4.8cm) jaws with 0.4-inch (1cm) long teeth; Overall dimensions 19.25-inch to 13.75-inch (48.9cm to 34.9cm) length; 11-inch to 13.25-inch (27.9cm to 33.7cm) width; 3.4-inch (8.6cm) thickness; Best suited to grip planks ranging from 1.25-inch to 4-Inch (3.2cm to 10.2cm) thick

USE YOUR CHAIN OR STRAP: 2.25-inch x 1.3-inch (5.7cm x 3.3cm) inside diameter (ID) end loop will connect to your 1/4-inch GR 43 proof coil chain or strap with a grab hook and attach to your forklift truck to pull a loaded pallet to a convenient spot for lifting, transporting, or unloading

Stop for holding pallet truck still in a moving truck or trailer.Handle for carrying

Just pull it into this Pallet Truck Stop and it's parked in less than 2 seconds

Special design at the bottom to increase friction on the ground and the chassis is supported by the stop

[Stabilize Pallet Jack] Fix the pallet truck wheel in the heavy-duty pallet jack chock to limit wheel movement, safer and more efficient handling of goods

[Durable Pallet Stopper] Made of heavy-duty rubber, special treatment on the bottom enhances friction and further improves the stability of the pallet jack during load, pallet truck is fixed in place. Suitable for standard and heavy duty pallet jack

[Pallet Stopper Details] Heavy-duty pallet jack chock measure 14.2 x 11.2 x 2 inches and its weight is 3.5lbs. Lightweight and durable, easy to carry, suitable for handling operations

Pallet Jack / Truck Load Wheels Replacement Poly on Steel Red Grade A

Stop for holding pallet truck still in a moving truck or trailer.Handle for carrying

Just pull it into this Pallet Truck Stop and it's parked in less than 2 seconds

Special design at the bottom to increase friction on the ground and the chassis is supported by the stop

Stop for holding pallet truck still in a moving truck or trailer.Handle for carrying

Just pull it into this Pallet Truck Stop and it's parked in less than 2 seconds

Special design at the bottom to increase friction on the ground and the chassis is supported by the stop

DELUXE VERGO PALLET BUSTER: The perfect tool for a variety of projects, use the pallet breaker tool to pry apart pallets, remove wooden boards, and reclaim wood for future projects. No need to use a hammer or a crowbar.

EASY TO USE - Simply slide the pallet buster tool in between the wooden plans and apply pressure to the handle. Effortlessly remove wooden planks, boards and break down pallets. Vergo deck wrecker comes with a forking head that allows you to apply pressure evenly helping to minimize damage to the boards.

PORTABLE - The pallet dismantling bar is ready to use in just a few steps, collapsible design can be taken apart for storage. Our pallet tool is made up of 4 pieces, Use the provided hardware to assemble the 3 piece handle and secure the handle to the forking head using the locking pin.

Stop for holding pallet truck still in a moving truck or trailer.Handle for carrying

Just pull it into this Pallet Truck Stop and it's parked in less than 2 seconds

Special design at the bottom to increase friction on the ground and the chassis is supported by the stop

AVOID DAMAGE: As its main function and purpose, the jack stop holds the pallet securely in place in any moving vehicle.

LIGHTWEIGHT: Weighing in at 5.3 pounds, it’s easily storable and transportable.

QUALITY MATERIAL: We use high quality rubber to create resistance so the pallet doesn’t slip and slide, no matter the weather or condition.

Sping Loaded Loop Handle - Loop handle is spring loaded to return to upright position and eliminate bending to retrieve.

27"W x 48"L Forks - Fork width: 6"; Raised height: 7-3/4"; Lowered height: 3"

3" Non Marring Load Roller, 7" Polyurethane Steer Wheels (Offers a 190° steering arc)

Pallet Jack / Truck Load Wheels Replacement Poly on Steel Red Grade A with Entry Exit Rollers

👍【2204LBS Maximum Capacity】：This pallet puller is made of thicker alloy steel，which can easily pull goods weighing less than 1T/2204 lbs.

👍【Easy-pull Design】: The pallet buster is easy to pull the pallet onto the trailer door. The scissor design increases the grip as the applied pulling force increases. The single scissors action allows a wider jaw opening

👍【Unique Convex Tooth Chuck】: 10 steel convex teeth on both sides of the jaws can easily grab the tray, with strong bite and not easy to fall off. The jaws can be opened up to 5" wide. Its pulling force is 2204 Lbs

[Fits 4.5’’ Wide Forklifts]: Features 96’’ length and 4.8’’ width that is suitable for 4.5’’ wide pallet forks; Extends the original fork’s size to carry more cargo per lift.

[Durable Alloy Steel]: Made from high tensile steel for premium strength and durability; Enables most lifting tasks in a warehouse or building site; Surface spray painting technology provides efficient rust and corrosion protection.

[Effortless Installation]: This pallet fork extension can be easily installed by one person without any tools required; Just slide the extension onto your pallet forks and you’re all set.

Replacement of pallet jack wheels located towards the front of the pallet jack forks and fit most standard pallet jack trucks.

Wheel Diameter: 2-7/8"; Wheel Width: 3-3/4"; Bearing ID: 20mm or 3/4". This particular wheel size is very common for import pallet jacks.

A pair of pallet jack load wheels feature a high grade 95A durometer black polyurethane ensures good performance and lasting use.

21"W x 48"L Forks, 3" Lowered Height, 7-3/4" Raised Height

3" Non Marring Load Roller, 7" Polyurethane Steering Wheels

6"W Tapered Forks

Please note: This stacker with fixed legs only suitable for block pallet. Not applicable to Stringer Pallets.

Load capacity 2200lbs | Adjustable fork width 11.6"-36.6" | Height,mast lowered 82.3 inch; Height,mast extended 82.3 inch.

Max lift height 63", fork lowered height 3.5"

3 3/8in.–7.87in. lift range

48in.L tapered steel forks

Powder-coat paint finish and tapered ends on forks ensure smooth entry into pallets

ADJUSTABLE FORK WIDTH: 8.8"-27.89"

LONG FORK: Single piece fork measuring at 45.27" L x 4" W.

IDEAL FOR THE WORKPLACE: The lift truck measures in at (66 x 59.5 x 83 inches) – it’s maintenance free and perfect for various workstations and workplace applications.

EASY TO USE: Easily maneuver using the top handle to control the direction of 4 polyurethane wheels over any surface.

SAFETY FOR ALL: The strength of the nylon securing straps assures your heavy load stays in place during your move, no matter who is operating the machinery.

LIFTING POWER: The steel hydraulic machinery movers will lift your load up to 10” so you don’t have to break a sweat.

Pallet jacks with load capacity: 2200Lbs. Fork size: 31.5”L×15”W. Max lift height: 5.9inch.

【Mini Size】Pallet jacks with flodable handle and forks. Suitable in both residential and commercial situations. 83Lbs of truck weight makes it easy for everyone to use. Besides, it is very easy to carry by car.

【Lower by Foot】The truck is designed to lower the forks by your foot, which requires less force compared to the design lower the forks by handle.

Overall Fork Width: 27"

Overall Fork Length: 45"

Capacity: 3000 Lbs.

DUAL CONTROLS: Lower material in a controlled decent with either hand or foot control for operator convenience.

OVERLOAD PROTECTION: Prevents lifting loads past maximum capacity.

NON-MARRING WHEELS: Polyurethane 6-1/4" x 2" steer wheels for non marking of floors, and quieter rolling.

【WORKING CAPACITY】The pulling capacity of this Pallet puller clamp is 1T/2204lbs, weighting 8.8lbs, the jaw opening size is 30mm/1.18" to 13cm/5"

【CONVEX TEETH CLAMP HEAD】The head of this pallet jack puller s designed with 10 teeth each side, can easily grab the pallet, with strong accusal degree, not easy to fall off, the head is self-cleaning and impervious to particles and debris

【CONVENIENT PULL DESIGN】With this pallet puller clamp,you can easily pull the loaded pallet on the flat ground and move it for lifting, transporting or unloading,the single scissor design for increased grab strength & more pulling force

IDEAL FOR THE WORKPLACE: Use with single faced pallets, skids and bulk containers for best results. Fits in tight, narrow aisles.

STRONG AND SECURE: The two 45" L x 6-1/2" heavy duty pallet forks can be raised 3-1/2" to 31-1/2” and the stabilizing support legs automatically extend when the load reaches 16.5”. When lowered, the lift automatically slows to protect heavier loads.

LESS WORK: This new hydraulic design helps you pump and release the manual lift with less effort. We want you to save your energy.

Loading capacity:3300lbs,Fork size 48"x27"

Lifting height(min/max):3.1"-4.3"

24V/20AH Lithium battery, brushless motor of maintenance-free

DUAL CONTROLS: Lower material in a controlled decent with either hand or foot control for operator convenience.

OVERLOAD PROTECTION: Prevents lifting loads past maximum capacity.

NON-MARRING WHEELS: Polyurethane 6-1/4" x 2" steer wheels for non marking of floors, and quieter rolling.

Aftermarket Products

High Quality Tested Products

These are Truck Specific