Best Easydrain in 2026

Easily install without tools - EasyDrain's Flexible P-Trap Pipe is designed to be durable and easy to install, with absolutely no need for tools or expert installation! Simply hand-tighten the included flanges to ensure that you get a proper seal.

Adjustable - Easily adjust your pipe between 13 inches up to 28 1/3 inches to fit any sink environment. The corrugated hose fits 1-1/2 inch sink istallations with a compatible connector that comes in two sizes. 1 ¼ and 7/8 sink drains.

Can be easily removed - Perfectly suited for connecting to your kitchen sink drain, garbage disposal, bathroom sinks, bathtubs and more. Should you run into a clog or need a deep clean, simply remove the p-trap and relief any clogged areas by simply straightening the hose and run water through it into a bucket.

Flexible & expandable - Universal Compatibility, fits most washers and dryers water discharge valve

Length - minimum 2' 6-1/2" to maximum 7' 2"

hose fittings: 3/4" (DN21.5) x 1" (DN 26) or 1 1/4" (DN29). You can cut the hose at the desired size

SIZING: Sink Drain Pipe ½” on one side and 4 sized straight waste connections : 1-½”, 1-9/16", 1-7/8", 2" - DN38, DN40, DN48, DN50

VERSATILE: Expandable & Flexible P-trap

LENGTH - Minimum 12.99" to Maximum 28.35"

Made of very moldable Butylic Rubber ensuring a tight and permanent seal. No messy wax, easy to clean.

Includes a plastic guide which helps facilitate installation

Does not dry out or crack

FIXES NOISY, RUNNING TOILETS: Toilet repair kit replaces inefficient fill and flush valves, and leaky flappers to help solve most common toilet fill problems

UNIVERSAL DESIGN: 400A toilet fill valve adjusts easily from 9 – 14 inches, fits most 2-inch flush valve toilets, and is ideal for use in 1.6 to 3.5 gallons per flush toilets or larger. Dual Flush: No

CORROSION RESISTANT: Solid frame 501 2-inch flapper features corrosion-resistant Microban material to prevent breakdown and leaks due to bacteria and is chlorine and hard water resistant

LONG-LASTING DURABILITY: Toilet flapper with solid frame replaces leaky, corroded flappers, preventing twisting, ghost flushing, and running toilet problems

UNIVERSAL DESIGN: Adjustable flapper fits most 2-inch flush valve toilets and is ideal for use in high efficiency 1.28 to 3.5 gallons per flush toilets

ADJUSTABLE TO SAVE WATER: Dial flapper adjusts for maximum flush efficiency and to save water

SHARKBITE BRASS PUSH FEMALE ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an MNPT thread quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs

VERSATILE: Pushfit female connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe

EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push female adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines

SHARKBITE BRASS PUSH CAP: This push-to-connect fitting allows you to plug the end of a pipe quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs

VERSATILE: Pushfit end caps work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe

EASY TO INSTALL: The innovative push-to-connect design of the SharkBite Plug End Caps allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines

SHARKBITE BRASS PUSH FEMALE ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an MNPT thread quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs

VERSATILE: Pushfit female connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe

EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push female adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines

SHARKBITE BRASS PUSH CAP: This push-to-connect fitting allows you to plug the end of a pipe quickly and easily; ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**

VERSATILE: Pushfit end caps work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe

EASY TO INSTALL: The innovative push-to-connect design of the SharkBite Plug End Caps allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines

SHARKBITE BRASS CRIMP ELBOW: This SharkBite brass crimp elbow coupling is a full-flow fitting that is used to make a 90-degree connection between two pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp elbows work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These 90-degree elbow connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

SHARKBITE BRASS CRIMP TEE: This SharkBite brass crimp tee coupling is a full-flow fitting that is used to make a connection between two PEX pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp tees work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These crimp tee connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

Female thread and male thread with 90 degree for connecting pipe; hard connect way so it does not need sealing for most situation;

Meet NPTF requirement of US, better than NPT thread, could be used as NPT thread, too;

Good raw material brass, high corrosion resistance, low magnetic characteristics and high temperature ductility;

PIPE CONNECTOR: Brass pipe connectors are perfect for making easy connections between same-size pipe; ideal for use in tight spaces **Large diameter fittings (1-1/4 to 2 inches) require a Stiffener (sold separately) when connecting to PEX pipe**

VERSATILE: SharkBite plumbing fittings are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe; approved for underground and behind-the-wall applications with no access panels (Wrapping required when burying underground)

EASY TO INSTALL: Straight coupling can be easily installed without the need for soldering, glue, or additional tools; can be installed in wet lines

SHARKBITE BRASS CRIMP ELBOW: This SharkBite brass crimp elbow coupling is a full-flow fitting that is used to make a 90-degree connection between two pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp elbows work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These 90-degree elbow connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

PIPE CONNECTOR: Brass pipe connectors are perfect for making easy connections between same-size pipe; ideal for use in tight spaces **Large diameter fittings (1-1/4 to 2 inches) require a Stiffener (sold separately) when connecting to PEX pipe**

VERSATILE: SharkBite plumbing fittings are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe; approved for underground and behind-the-wall applications with no access panels (Wrapping required when burying underground)

EASY TO INSTALL: Straight coupling can be easily installed without the need for soldering, glue, or additional tools; can be installed in wet lines

SHARKBITE BRASS CRIMP TEE: This SharkBite brass crimp tee coupling is a full-flow fitting that is used to make a connection between two PEX pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp tees work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These crimp tee connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

Adapts 1/4" NPT male end to 1/4" tube size female end at a 90-degree angle

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

For use with LP and natural gas, refrigeration, and hydraulic applications

REDUCER PIPE CONNECTOR: Brass pipe connectors are perfect for making easy connections between same-size pipe; ideal for use in tight spaces **Large diameter fittings (1-1/4 to 2 inches) require a Stiffener (sold separately) when connecting to PEX pipe**

VERSATILE: SharkBite plumbing fittings are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe; approved for underground and behind-the-wall applications with no access panels (Wrapping required when burying underground)

EASY TO INSTALL: Straight coupling can be easily installed without the need for soldering, glue, or additional tools; can be installed in wet lines

BRASS TEE: Tee Fitting features innovative push-to-connect design makes for quick and easy installation when joining same-size pipe; ideal for use in tight spaces

VERSATILE: Tee coupling is compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe; approved for underground and behind-the-wall applications with no access panels (Wrapping required when burying underground) **Requires a stiffener when conencting to PEX pipe (Sold separately)

EASY TO INSTALL: SharkBite plumbing fittings do not require any soldering, glue, or crimping for installation; can be installed in wet lines

SHARKBITE BRASS PUSH WASHING MACHINE VALVE: The SharkBite washing machine straight valve can be used in washing machine installations with no washing machine outlet box; ideal for working in tight spaces

VERSATILE: This plumbing valve can be mounted to a stud or joist, and features a 1/2-inch push-to-connect inlet that works well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; features a quarter-turn angle water valve with mounting brackets

EASY TO INSTALL: The innovative design of the SharkBite brass push washing machine valve allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines; remove using a disconnect clip or disconnect tongs

INSTALLS IN SECONDS: 1/4 inch 90 degree elbow pipe connector requires no soldering, crimping, or glue; Just push to create a watertight seal

VERSATILE: Fits copper, CPVC, and PEX pipe and connects all 3 types in any combination

HIGH QUALITY: SharkBite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure clean, leak-free connections

REDUCER PIPE CONNECTOR: Brass pipe connectors are perfect for making easy connections between same-size pipe; ideal for use in tight spaces **Large diameter fittings (1-1/4 to 2 inches) require a Stiffener (sold separately) when connecting to PEX pipe**

VERSATILE: SharkBite plumbing fittings are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe; approved for underground and behind-the-wall applications with no access panels (Wrapping required when burying underground)

EASY TO INSTALL: Straight coupling can be easily installed without the need for soldering, glue, or additional tools; can be installed in wet lines

INSTALLS IN SECONDS: Repair with no special tools, soldering, crimping, or glue; Just push to create a quick watertight union with SharkBite pushfit connectors

VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination

LEAD-FREE: Made of high-quality forged DZR brass that is lead-free. Ball valves, shutoffs, and compression fittings, are safe for potable water lines

SHARKBITE COPPER CRIMP RING: This SharkBite crimp ring crimp brass or poly PEX crimp fittings onto PEX or PE-RT pipe; available in 3/8 inch to 2 inch sizes

VERSATILE: This crimp ring works well with brass or poly PEX crimp fittings; crimp to create a watertight seal without soldering or glue required

DURABLE: Crimp rings are made from copper for stronger durability

SHARKBITE COPPER CRIMP RING: This SharkBite crimp ring crimp brass or poly PEX crimp fittings onto PEX or PE-RT pipe; available in 3/8 inch to 2 inch sizes

VERSATILE: This crimp ring works well with brass or poly PEX crimp fittings; crimp to create a watertight seal without soldering or glue required

DURABLE: Crimp rings are made from copper for stronger durability

SHARKBITE BRASS CRIMP ELBOW: This SharkBite brass crimp elbow coupling is a full-flow fitting that is used to make a 90-degree connection between two pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp elbows work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These 90-degree elbow connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

【Package Includes】: Pex Fittings Set includes 25pcs 1/2" PEX Elbows

【Non-Pollution】: Lead free brass pex fittings, comply with drinking water standard. ASTM F1807 NSF/ANSI 61 Certified

【Extra-Long Service Life】: High-quality brass pex 90 degree elbow set resists corrosion, rust and high temperature (32℉—200℉).

INSTALLS IN SECONDS: 90 degree elbow pipe connectors requires no soldering, crimping, or glue, just push to create a watertight seal; can be installed in wet lines

VERSATILE: Elbow connector fits PEX, copper, CPVC, PE-RT, and HDPE pipe in any combination

LEAD FREE: 90 degree elbows are made of durable high quality forged DZR brass which is lead free

SHARKBITE BRASS CRIMP ELBOW: This SharkBite brass crimp elbow coupling is a full-flow fitting that is used to make a 90-degree connection between two pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp elbows work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These 90-degree elbow connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up