Best Edge Industrial Emz in 2026

2 HP SPL COMPRESSOR DUTY ELECTRIC MOTOR, ODP (OPEN DRIP PROOF) FOR DRY INDOOR ENVIRONMENTS

1 PHASE, 56 FRAME, 3450 RPM, 120V/240VAC, 5/8" SHAFT DIAMETER

CAPACITOR START AND CAPACITOR RUN CONTINUOUS DUTY COMPRESSOR MOTOR

BRAND NEW TRUE 5HP COMPRESSOR DUTY MOTOR, 56HZ FRAME, 3450RPM, 7/8" SHAFT DIAMETER

22 FULL LOAD AMP AT 230V, THIS MOTOR NOT SUITED FOR INCOMING VOLTAGE LESS THAN 208V

CCW (COUNTER CLOCKWISE) SHAFT ROTATION WHEN VIEWED FROM THE SHAFT END. SHAFT ROTATION IN NOT REVERSIBLE

3 HP - 1 PHASE - 56 FRAME - 3450 RPM - 230VAC - 5/8" SHAFT

1 PHASE, 56 FRAME, 3450 RPM, 230VAC, 5/8" SHAFT DIAMETER

CAPACITOR START AND CAPACITOR RUN CONTINUOUS DUTY COMPRESSOR MOTOR

Patented LED ring. Air flow - 40.6 CFM. Noise level - 24.0 decibels

Concentrated compression blades (CCB) is engineered to focus the inner weaker circle of Air outwards, allowing the outer section to pressurize and compress the Air.

Hydraulic Bearing/Low-Noise design lowers operating noise and improves efficiency. The Low-Noise cable can reduce the noise level by 24% from 24.6dBA to 18.7dBA.

Patented LED ring. Air flow - 40.6 CFM. Noise level - 24.0 decibels

Concentrated compression blades (CCB) is engineered to focus the inner weaker circle of Air outwards, allowing the outer section to pressurize and compress the Air.

Hydraulic Bearing/Low-Noise design lowers operating noise and improves efficiency. The Low-Noise cable can reduce the noise level by 24% from 24.6dBA to 18.7dBA.

Cont./Peak Current:80A/400A

Motor Type Supported:Brushed Motor (540, 550, 775 Size Motor)

LiPo / NiMH Cells: 2-4S LiPo or 5-12S NiMH.,BEC Output: 6V@4A (Switch-Mode)

Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.

This product is made from high quality materials and designed for long-lasting performance.

This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

Model Name:4 Pieces Synchronous Synchron Motor Turntable Motor Electric Cuptisserie Motor Cup Turner Motor Power: 4 watts; AC voltage range: 100-127 V; Frequency: 50/ 60 Hz; Rotating speed: 2.5-3 R per minute; Manner of working: CCW/ CW

Size: motor is 1.9 inch/ 4.8 cm in diameter, 1.57 inch/ 4 cm in height; Cable is 0.08 inch/ 2 mm in diameter, 15.7 inch/ 40 cm in length

Efficient synchronous motor: small power consumption and large torque

Model Name:4 Pieces Synchronous Synchron Motor Turntable Motor Electric Cuptisserie Motor Cup Turner Motor Power: 4 watts; AC voltage range: 100-127 V; Frequency: 50/ 60 Hz; Rotating speed: 5-6 R per minute; Manner of working: CCW/ CW

Size: motor is 1.9 inch/ 4.8 cm in diameter, 1.57 inch/ 4 cm in height; Cable is 0.08 inch/ 2 mm in diameter, 15.7 inch/ 40 cm in length

Efficient synchronous motor: small power consumption and large torque

Shaft 1/4" x 1"; Rotation = CCW; 3.3" Diameter Motor

Sheet metal = 8 15/16" x 8 15/16"; Wheel = 5.75" x 2"

2 Mounting Studs Opposite Shaft End

Bathroom exhaust fan replacement: 50CFM, 0.65 amps, 3000 Rpm, 120 volts, 60Hz

Shaft = 3/16" x 1 3/4", wire length = 6" with 2-prong plug

UL certified bathroom vent fan motor replacement kit: stable and durable

【 Product description】This universal bathroom exhaust fan motor and blower wheel eliminates bathroom odor, removes moisture from the air, and improves indoor air quality.

【 Package includes】1 motor & 1 fan. Motor is mechanically reversible - shipped ccw (counter clock wise) shaft end. Mounting studs, 1 7/8 inch on center

【Product specifications】0.65 amps, 3000 rpm, 120 volts 60hz, 50 cfm, continuous duty, air over. Shaft 1.75 inches long x 3/16 inches diameter, wire length = 6 inches with 2-prong plug

【Durable】Durable metal construction for long-lasting performance.

【More Funny】Provide the option of being able to change your gear ratio for different track conditions.

【💡】48P is the pitch of each tooth on the pinion gear and the 19T 20T 21T 22T 23T is the number of teeth on the pinion gear. You have to make sure your spur gear and pinion gear have the same pitch, or the teeth won't mesh.

REPLACEMENT HOUSING: Fits NuTone 696N without "R0" number, 696N-R01, and 696N-R02, with housing size 8 inch. x 7-1/4 inch only - or units manufactured prior to the year 1999 (not compatible with models 696N, 696N-R01, 696N-R02 and 696N-R03 with housing size 7.25 in. x 7.5 in.)

DURABLE: Housing is constructed of durable PVC for lasting use

CONVENIENT: No drywall or duct work changes required with this replacement housing!

B2854 replaces old Century stock, B854

1-1/2 HP

230/115 volts

Rated Voltage: 13.5 VDC

3/8" shaft with 1 flat ("D" shaft) where flat to OD is 0.322" and the length of the shaft is 0.886" long

Rated Speed: 50 RPM

✔Include: 10 male & 10 female connectors w/Shrink tubing.

✔Max. current: Approx 120A

✔Material: durable flame-resistant gold-plated copper & hard plastic.

1/4 HP, 1625 RPM, 3.1 Amps, 115 V; 2-Speed; CW Lead End Rotation

Double Shaft: 5-3/4" x 1/2" x 5-3/4''; Sleeve Bearings

Bracket on motor bottom

Keep good air quality: Using our motor with fan on your RV, can effectively exhaust lingering smells in the bathroom and built-up moisture, provide a healthy environment for you!

Long lifespan: The fan blade made of durable plastic which can resist rust and corrosion, and last for a long time. And all our motor had been tested before you got it, we care a lot about your device safety. (Only for RV!)

Decide your rotation: The direction of spin is determined by looking down through the motor, at the top of the blade. and the vent fan motor has reverse polarity, which allows turning in both clockwise or counterclockwise. you can determine the direction yourself if it rotates in the wrong direction, just reverse the wires on the motor.

Variable 3-speed Ultra-Energy Efficient ECM

QuietCool Smart App Control

Up to 2,801 CFM on high at 148 Watts and Down to 1,337 CFM at 22 Watts

This is a TYC-50 AC 110V 28-33RPM CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is combination of metal/plastic to ensure the gear working continuously and quietly. We promise we will tested ever motor before shipment.

【Specification】 Product Name:Synchronous Motor; Model:TYC-50; Shaft Diameter: 7mm ;Shaft Length: 16mm; Direction : CW/CCW(UNCONTROLLABLE); Voltage : AC 110V-130V; Speed : 28-33RPM; Power : 4W;Torque:≤1.1kgf.cm; Frequency : 50/ 60Hz;

【Application】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners, microwave ovens, glue machines, electric ovens, rotating lamps, electric tables, electric models, electric advertising, electric shelves, dishwashers, control appliances , curtain machines, etc.

This is a TYC-50 AC 110V 2.5-3RPM CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is combination of metal/plastic to ensure the gear working continuously and quietly. We promise we will tested ever motor before shipment.

【Specification】 Product Name:Synchronous Motor; Model:TYC-50; Shaft Diameter: 7mm ; Shaft Length: 16mm;Direction : CW/CCW(UNCONTROLLABLE); Voltage:AC 110V-130V;Speed:2.5-3RPM; Power : 4W; Torque:≤9.5kg.cm; Frequency : 50/ 60Hz;

【Application】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners, microwave ovens, glue machines, electric ovens, rotating lamps, electric tables, electric models, electric advertising, electric shelves, dishwashers, control appliances , curtain machines, etc.

This is a TYC-50 AC 110V 0.8-1RPM CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is combination of metal/plastic to ensure the gear working continuously and quietly. We promise we will tested ever motor before shipment.

【Specification】 Product Name : Synchronous Motor; Model : TYC-50; Shaft Diameter: 7mm ; Shaft Length: 16mm; Direction : CW/CCW(UNCONTROLLABLE); Voltage : AC 110V-130V; Speed : 0.8-1RPM;Power : 4W;Torque:≤14kg.cm; Frequency : 50/ 60Hz;

【Application】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners, microwave ovens, glue machines, electric ovens, rotating lamps, electric tables, electric models, electric advertising, electric shelves, dishwashers, control appliances , curtain machines, etc.

The new upgrade, a larger 050 size brushed motor option for the Axial SCX24.

050 Motor PRO provide increased power and torque compared to the stock motor

Rotor with a strong structure guarantees outstanding performance and super durability

This is a TYC-50 AC 110V 5-6RPM CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is combination of metal/plastic to ensure the gear working continuously and quietly. We promise we will tested ever motor before shipment.

【Specification】 Product Name: Synchronous Motor; Model : TYC-50;Shaft Diameter: 7mm ; Shaft Length: 16mm； Direction : CW/CCW(UNCONTROLLABLE); Voltage : AC 110V-130V; Speed : 5-6RPM;Power : 4W;Torque:≤4.8kg.cm; Frequency :50/ 60Hz;

【Application】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners, microwave ovens, glue machines, electric ovens, rotating lamps, electric tables, electric models, electric advertising, electric shelves, dishwashers, control appliances , curtain machines, etc.

Input voltage MAX: 2s - 3s Lip; 6 - 9 cell NiMH (2s only for Short Course Trucks)

ESC Size: L: 1.93" W: 1.48" H: 0.79" (1.96 oz.)

MOTOR Size: L: 52.7mm, Diameter: 36mm and M3 @ 25mm Mounting Holes.

Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs

5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos

LiPo 2 - 6s (Cells), NiCd/NiMH: 5 - 18 Cells, 6.4v - 25.2v

TT02B

NEW 3.7HP COMPRESSOR DUTY MOTOR, SINGLE PHASE, 56 FRAME, 3450RPM, 5/8" SHAFT DIAMETER

IF THE MOTOR YOU ARE REPLACING SHOWS HP AS (5HP SPL) OR JUST (SPL) AND IS ALSO RATED BETWEEN 15-17 FULL LOAD AMPS AT 230V, THIS MOTOR WILL REPLACE YOURS

CCW (COUNTER CLOCKWISE) SHAFT ROTATION WHEN VIEWED FROM THE SHAFT END. SHAFT ROTATION IN NOT REVERSIBLE

Pay attention: Please read the instructions or pictures carefully, use the correct circuit diagram to avoid short circuit, short circuit will produce high temperature and Causing accessory damage

Shaft Propeller Aperture:2mm/0.078"; Diameter:80mm/3.15"; Number of vane:4 vane and 3 vane;colour:Red & Blue & Yellow

DC Motors Color:Siler+Red;Voltage:DC 3V-12V;No-load speed: 9000RPM- 25000RPM ±10%; Motor Body Diameter:27mm/1.06";Shaft Size:10x2.0mm/0.39"x0.08"(L*D);Motor Body Length;38mm/1.46"