Best Elumplus in 2026

【2 IN 1 Mini Ratchet Set】2 in 1 mini ratchet wrench, a complete ratchet set to meet your daily needs. ▶As a screwdriver bit ratchet, with different types of bits, available in Phillips/Slotted/Hex/Square/Torx/Tamperproof Torx bits. ▶As a socket ratchet wrench, use the included 1/4" sae sockets, get a mini-socket set.

【Accessories】▶Screwdriver bits are made of S2 alloy steel, high wear resistance, high hardness and good toughness, giving it a longer service life than ordinary bits. ▶49pc bits set - Phillips(1,1,2,2,2,2,3,3), Square (1,2,2,3), Hex(1/8",1/8",9/64",9/64",5/32",5/32",3/16",3/16"), Slotted(3,3,4,4,5,5,6,6), Torx(10,10,15,15,20,20,25,25,27,27,30,30,40,40), Tamperproof Torx(10,15,20,25,27,30,40) ▶6pc sockets(3/16",1/4",7/32",5/16",11/32",7/16"), 1pc adapter, 1pc quick release bit hold.

【Reversible Ratchet Wrench】▶1/4" small ratchet wrench, smaller than your palm, designed specifically for use in narrow spaces. Even the mini wrench is equipped with a ratchet mechanism to reduce unnecessary swinging operations. ▶The reversing switch can be tightened and loosened screw at your will.

PREMIUM - Precisely machined HEX & Torx sizes. Crafted and Designed with superior materials for increased torque and unmatched hardness.

DURABLE - Industrial grade, heat treated S2 alloy steel will increase turning power. Heavy-duty, will outperform the regular cr-v or common carbon materials.

LONGEVITY - Manganese Phosphate coating for rust and corrosion protection. Plus, the chamfered edges and ball end design will provide up to 25-degree angle entry.

Removable Power Tools Accessory Case

Quick Release, 72 Tooth Ratchet for high torque ratcheting

Durable anti-slip vinyl grip bit driver with maximum comfort.

HIGH DURABILITY: The impact socket set 1/2 drive metric and standard is made of high impact grade components of this master kit are constructed of drop-forged premium chrome vanadium Cr-V steel to withstand extreme levels of torque changes against fasteners.

6 POINT DESIGN: The 6-Point hex 1/2 impact socket set design prevents round-off on nuts and bolts under high torque exertion and hammering stress from the use of an impact wrench or electric wrench with a strong output.

DUAL MARKINGS: The impact socket set 1/2 drive has a highly visible laser-etched markings on the black phosphate finish makes it easy to identify drive socket sizes and measurements to allow for fast application, efficiency, and accuracy in your automotive workspace.

Mechanics tool set includes 72 tooth count ratchets which allow for a 5 degree arc swing for maneuverability in restricted areas

Vinyl, anti-slip driver handle provides maximum comfort for the mechanics tools

Durable case with metal latches provides protection and storage for your DEWALT mechanic tool set

168PC 14/38/12DR SOCKET SET PTA

168PC 14/38/12DR SOCKET SET PTA

168PC 14/38/12DR SOCKET SET PTA

PRECISE - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.

DURABLE - Reinforced ratchet gear head constructed from hardened, heat-treated Chrome Vanadium alloy steel.

LONGEVITY - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.

Updated version of the best selling CTK170CMP, this new set has a new and sturdier blow mold case as well as new and improved Crescent screwdrivers

Contains a carefully selected assortment of hand tools needed for most industrial, mechanical, and consumer applications

Set includes 1/4 inches, 3/8 inches and 1/2 inches drive tools (SAE and Metric). Drive Type 6 and 12 Point. Drive Tang Size 1/4 inches, 3/8 inches, 1/2 inches

measurement_system

Extremely robust and durable

Suitable for 1/4" hex bits under DIN 3126-C 6,3 and E 6,3, ISO 1173 and Wera series 1 and 4, Wera Adaptor 870/1 for 1/4" sockets

Includes 15-pc. combination wrenches: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in.; Roll-up storage pouch

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

Applications of this adjusting tool include Ducati 1098, 1198, Streetfighter-1098, Multistrada 1200, Monster 1200, 1199, Diavel and all other Single Sided Large Axle Swingarms

Use alone or with a 3/8"D wrench for the adjustment of the drive chain on motorcycles fitted with single sided swinging arms

Alternative to 88713.1038 or 887131038. Manufactured precisely to fit the eccentric spanner nut

CORROSION RESISTANCE: Full Polish Chrome Finish

QUICK ENGAGEMENT: 12 Point Box End with fastener

ADDITIONAL KNUCKLE CLEARANCE: 15° Box End Offset

Set Includes: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8"

Individually tested to 10,000 volts AC and rated to 1,000 volts AC for safety and peace of mind

Black oxide finish for corrosion protection

90 tooth design, 4 and DEG of arc swing

90-Tooth design

4 and DEG of arc swing

Access with these sockets are intended for use

Strength with Surface Drive contact points virtually eliminate the rounding of fasteners

Angled entry guides the socket on to the fastener

LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.

CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.

RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.

Entry Angle guides fastener

Serration depth as deep as the fastener

Large hard stamped identifications

Includes 8-pc. stubby combination wrenches: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in.; Wrench holder

Short length and a slim body make it easy to operate in areas with limited room

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

15° offset for better access in tight spaces

Off-corner loading design on box end provides better grip and reduces fastener rounding

Long pattern beam length for improved reach, leverage and torque

Gearwrench's off-corner loading design has an open end, stronger grip, reduces fastener rounding, and has up to 25% more torque

Gearwrench's Wrench Set has an off-corner loading design on box end for better grip and reduced fastener rounding

15° offset box end for better access

Solution to the extraneous rust problem: fasten stainless screws with stainless tools

Hex-plus allows hexagonal socket screws to live longer

Stainless l-keys prevent extraneous rust on stainless screws

Combination Wrench Set Comes with Lockable Stacking Cases

Stamped hashmark pattern on SAE combination wrench set handle provides added grip points.

Longer panel design gives more torque during use.

Includes 15-pc. inch combination wrenches: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in.; 15-pc. metric combination wrenches: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 mm; Roll-up storage pouches

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

15° offset for better access in tight spaces

Off-corner loading design on box end provides better grip and reduces fastener rounding

Long pattern beam length for improved reach, leverage and torque

Long Pattern Length

Offset Box End for Increased Access

Surface Drive Plus on Open End: Stronger Grip, Reduces Fastener Rounding

CORROSION RESISTANT: The combination wrench has chrome finish for corrosion resistance

QUICK ENGAGEMENT: 12 point box end for quick engagement with fastener

KNUCKLE CLEARANCE: 15 degree box end offset for additional knuckle clearance

Product 1: 72 tooth ratcheting box end needs a minimal 5° to move fasteners vs 30° for standard wrenches

Product 1: Off corner loading design on box end provides better grip and reduces fastener rounding

Product 1: Pass thru technology works down any length of threaded rod and long bolts

INDUSTRIAL GRADE - Forged from high-quality chrome vanadium steel, highly polished surface, the torque is over DIN3113 standard, overall hardness reaches HRC48, more durable, stronger and corrosion resistant.

12 SAE WRENCHES - 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8"

PRECISION DESIGN - The 180 degree Flex-Head can perform precise repair work in any space. The 72-tooth ratchet gears need only a 5-degree working swing arc suitable for any narrow space. High torque to tighten or loosen any bolts without rounding.

INDUSTRIAL GRADE - Forged from high-quality chrome vanadium steel, highly polished surface, the torque is over DIN3113 standard, overall hardness reaches HRC48, more durable, stronger and corrosion resistant.

10 METRIC & 10 SAE WRENCHES - 6mm, 8mm, 10mm, 12mm,13mm, 14mm, 15mm, 16mm, 17mm, 18mm & 1/4‘’, 5/16‘’, 11/32‘’, 3/8‘’, 7/16‘’, 1/2‘’, 9/16‘’, 5/8‘’, 11/16‘’, 3/4‘’.

PRECISION DESIGN - The 72-tooth ratchet gears need only a 5-degree working swing arc suitable for any narrow space. High torque to tighten or loosen any bolts without rounding.