Best Erie Outdoor Power Equipment in 2026

M22 High-Pressure Swivel Nut Brass Coupler Fitting

Inlet: 1/4" FNPT Female

4500 Max PSI

Direct-drive triplex plunger pump.

1-inch right hand hollow shaft pressure washer pump.

Maximum Pressure: 3,200 PSI (220 Bar) Flow Rate: 5 GPM

3 Spindles Required for 42"

Compatible with Cub Cadet LT 1040, LT 1042, and RZT models with 42" Deck

MTD 618-0624A, 618-0659A, 918-0624A, 918-0624A

AYP 48" deck 2002 and newer

Grease fitting on threaded end

LT19A, LT2119A, LT2122A, LT2122A2

Fits Cub Cadet MTD 618-04125, 618-04126, 618-04126A, 918-04125A, 918-04125B, 918-04126, 918-04126A

Fits i1050, LT, SLT and RZT Zero Turns with 50" Decks using star center hole blade

Oregon 82-403 Sunbelt B1CC111

Hot and cold water grade professional pressure washer gun and wand

5000 Max PSI high pressure gun assembly with 36" Wand

heavy duty trigger valve trigger lock gun for safe operation

Easy Pull, Safety-off trigger lock and brass internal parts

Enables hose to enter pistol grip for easier handling

Deluxe: Inlet: 3/8" Male Plug, Outlet: 1/4" female

✅[M22-14mm Female Thread to M22-15mm Male Fitting] : Compatible with Sun Joe M22-15mm Pressure Washer Hose. Please check if your power washer and hose match the adapter before purchasing. M22 15mm fitting is replacement for Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell power washer.

✅[Professional Adapter]: High strength steel layer with twice Anti-rust Treatment. No shake or leaking, work great on gas and electric pressure washers, nice choice for both professional, business and household users.

✅[Super Pressure Resistance]: Real 4,000 PSI up to 4500 PSI working pressure for long lifetime.

ATTENTION: M22 14 mm swivel fitting has 14 mm inside diameter, NOT 15mm. NOT FIT electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz. If washer needs 15 mm, may cause leakage.

8-pack universal Pressure Washer Adapter Set, 4 kinds of couplers includes: Metric M22-14 swivel female + 3/8’’ plug, 3/8’’ quick disconnect + M22 male, 3/4’’ female + 1/2’’ quick connect, 1/2’’ plug+ 3/4’’ male.

Two Quick Connector Sets connect water outlet of pump to pressure washer hose or connect pressure washer hose to gun. The other two Quick Connect Kits converts 3/4’’ threads to quick release fittings, connecting all 3/4" standard garden hose to water inlet of power washer pump.

Convenient to connect: these pressure washers and quick connector plug nipples are easy to be assembled manually, these adapter sets and nipples make a quick connection for hose, water pump, ball valve, telescoping wand, surface cleaner and so on

NPT-compliant: these adapter sets and quick connector plug nipples are all NPT-compliant, please check the specifications before connect them, you can connect to most NPT-compliant connectors

Quantity and size: there are 4 sets of quick connector pressure washer adapters, sufficient for your replacement use, the stainless quick connector kit and pressure washers coupler nipples are 3/8 inch, pay attention to connect to the 3/8 inch size connector before connecting

M22-14mm swivel+3/8''QD

Max. Working Pressure: 5,000 PSI

Max. Temp 300°F

Precision design by Kadee.

Exceptional quality.

True to life detail.

Easy to connect: you can assemble these pressure washers and quick connector plug nipples easily, these adapter sets and nipples make a quick connection for hose, water pump, ball valve, telescoping wand, surface cleaner and so on

NPT-compliant: these adapter sets and quick connector plug nipples are all NPT-compliant, please check the specifications before connect them, you can connect to most NPT-compliant connectors

Size: stainless quick connector kit and pressure washers coupler nipples are 3/8 inch, pay attention to connect to the 3/8 inch size connector before connecting

Including 2 secure fittings, convert 1/4" quick connect socket to 1/4" female NPT.

Made of premium quality and durable brass. Ball lock design ensures a solid connection and prevents water leakage.

Easy to assemble and disassemble the high power washer connections in lots of situations.

♥ Warm Reminder - This is an M22-14mm diameter male connector, can't compatible for some electric pressure washer and hose which equipped with an M22-15mm fitting of Sun Joe, AR Blue. Please check that first, or send the brand and model to us to confirm it.

⭐Pressure Washer Hose Extender - M22-14mm male X M22-14mm male to extending your hose to longer length, you don't have to move around your house and driveway, get done your clean work faster!

⭐Premium Solid Brass - High-quality SOLID BRASS and rustproof coating, outstanding ductility at high temperatures, low magnetic permeability. Much thicker and heavier, connected with hose thread firmly without water leak or pressure loss, More durable.

Pressure washer quick connect kit includes two 1/4 quick connect fittings. Convert 1/4" quick disconnect plug to 1/4’’ male NPT fitting.

Pressure washer fittings is made of stainless steel, Wear resistantand, resistance to corrosion, long service life. Pressure washer quick connect's working pressure is up to 5000 PSI.

Make it easy and quick to exchange of pressure washer outlet, sewer jetter hose, guns and nozzles.

3/8" QD + 3/8" female (stainless steel material), 3/8" plug + 3/8" female (brass material)

Max. Working Pressure: 5,000 PSI

3/8" QD Ball lock design ensures a solid connection, simple to assemble and disassemble with 3/8’’ plug

Fits coupler boxes for several manufacturers' Cars

One piece Delran plastic

No additional springs required

PRACTICAL AND CONVENIENT — Both ends of this pressure washer fittings are M22 14mm male thread, which can help you connect your high-pressure cleaning hose with M22 14mm female connector to any power washer equipment with M22 14mm female connector!

UPGRADED REMOVABLE SHELL — The handle of this m22 14mm to 14mm pressure washer swivel kit is made of rubber, which can prevent scratching your fingers, increase the friction between fingers and fittings, help you rotate the pressure washer hose adapter to hoses more easily!

HIGH QUALITY BRASS — This pressure washer hose connector set is made of high quality brass, connected with each part firmly. At the same time, it has corrosion resistance. It is the best choice for both environmental protection and practicality!

【Size】: Including 2 secure fittings, convert 3/8"(9.525mm) quick connect socket to 3/8" female NPT, please confirm the brand sell before buying

【High Quality】: Made of premium quality and durable brass quick connect, ball lock design ensures a solid connection and prevents water leakage

【Working pressure】: This 3/8" pressure washer couplers brass fittings Working pressure is rated to 5,000 PSI

✔ Package included:12Pcs ho train couplers.

✔ Suitable for supplement, repair, upgrade

✔ Integrated spring, simple installation.

ATTENTION: M22 14mm quick connect’s INSIDE DIAMETER IS 14mm, NOT 15mm!!! It may cause leakage when your fitting’s 15mm. Pressure washer adapter not fit electric brand pressure washer with M22 15mm fitting.

UPGRADE MATERIAL: Unlike other pressure washer quick connect, pressure washer quick connect 3/8 is made of brass and stainless steel. Not only can be anti-rust, extend the service life, but also plays a decorative role.

EASY to INSTALL: According to connection map, pressure washer quick disconnect is easy to connect and disconnect. you only need to connect pressure washer hose adapter correctly, and then you can apply it to your pressure washer. Saving your lots of time. If you not sure your pressure washer needs M22 15mm or M22 14mm fitting, please contact with us.

What this adapter for - This is a Connection Stabilizer which is used for the connection between pressure washer outlet, gun, and hose. It will help to reduce the damage to "screw on" and "release", help the pressure washer accessories last longer.

Coupler Size: M22-14mm female x M22-14mm female. Please note: NOT FIT electric pressure washer with M22-15mm fitting like sun joe, Ar blue, or some special connector, otherwise may cause leakage. Before purchasing, please check your washer connection. NOT FIT garden hose, an inlet of the pressure washer, or the faucet.

Super pressure resistance: Up to 4,000 PSI Max. Working Pressure(280 Bar). Fit almost all pressure washers.

Compatible with all magnetically operated couplers currently on the market

Simple Instalation, Integrated spring

HO Scale – 1:87 -- Conforms with NMRA (National Model Railroad Association) Standards

【Two Size Available】: 2 Pack of 1/4 inch Male quick connect plug/nipple OR 3/8 inch Male quick connect plug/nipple for NPT quick connect couplers

【Fitting】: This Male quick connect plug fits 1/4" or 3/8" inch female quick connect fittings / quick coupler socket or 1/4" or 3/8" inch female pipe thread /quick coupler socket

【Easy to Use】: Convert 1/4" or 3/8" Male quick disconnect plug to Female 1/4" or 3/8" female NPT fitting, working pressure is up to 5000 PSI

✔️ PACKAGE CONTAINS: Stainless Steel Quick Connect Socket with 3/8" inch Male NPT (National Pipe Thread) and one (1) Stainless Steel Plug/Nipple with 3/8" inch Male NPT (National Pipe Thread)

✔️ MANY USES: These universal stainless steel fittings can be used with pressure washer wands, spray guns, hose, surface cleaners, foam cannons, or other types of related products

✔️ CORROSION RESISTANCE: All stainless steels have a high resistance to corrosion. These will perform better than brass and will be easier to connect or disconnect when swapping out accessories

Compatible with all magnetically operated couplers currently on the market

Simple installation

Integrated spring

M22 High-Pressure Swivel Nut Brass Coupler Fitting

Inlet: 1/4" FNPT Female

4500 Max PSI

Material:copper and the surface is Ni plated.

Powersupply:DC.It is one-way conductive.

Magnetism:none.