Best Espeeder in 2026

The female to male fitting adapter size: female 8an to male -8an (3/4-16 UNF) thread pipe connectors, 90 degree swivel hose fitting adapter

Forged swivel 6an elbow design fitting can be used with fuel, oil, gas, fluid, water, air line. 90 degree adapter fitting can allow for the connection of hose ends to other components like oil pumps, fuel pumps and fuel filters

The 90 degree adapter fitting forged swivel elbow design, swivel 360° elbow design allows you to get things reasonable tight while still maintaining the swivel functionality so that you can ensure a proper connection and positioning before doing that final. The swivel fitting has 37-degree sealing angle design assures leak free performance

Function : Swivel Hose End Fitting usually used for Oil/ Fuel/ Water/ Fluid/ Airline etc. Connect engine transmission oil cooler, engine and air filtration system, engine and cooling system. Suitable for EFI systems rubber push-lock oil hose. (Not compatible with PTFE hose, nylon baided hose or stainless steel braided hose.)

Three Anti-leakage Designs ： 1. Push on with 37- degree mating angle which provided superior sealing 2. Push on lock fitting raised edges stop the hose from sliding and prevent leakage 3.Aluminum hose cover for hose sliding and protection of hose ends, have a smooth snag-free performance.

Size : 6AN 90 degrees hose fitting; Push lock hose fitting made of lightweight 6061-T6 aluminum, black anodized surface has anti-corrosion effect.

Universal fitment, Joins 4.0" OD Pipe to 4.0" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. reducing costs and time Significantly.

The lap joint clamps 4.0" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars.

Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection.

Universal fitment, Joins 2.5" OD Pipe to 2.5" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. reducing costs and time Significantly.

The lap joint clamps 2.5" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars.

Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection.

0.75L oil catch can made of High Quality T-6061 Aluminum and TIG welded for Enhanced Strength and Durability.

Separates Oil Particles From PCV/CCV Air to Prevent Intake Valve Gunk Accumulation, 10AN oil catch can keep your engine to perform at its best for the longest period of time.

Air filter to prevent pressure from building up in the system, can be use as Vented System, Universal oil catch can with breather, suitable to most vehicles.

[Collect Oil & Keep Engine Clean]--The oil collection tank will collect the oil and moisture in the PCV/CCV air to prevent carbon and sludge in the intake system and the engine, keep the engine clean and extend its service life.

[ Function ]-- Mostly it is used to trap the oil that comes with gases from the combustion process and thus prevent accumulation in the valves in GDI engines. Preventing misfires due to carbon accumulation in the valves.

[Superior Quality]--Made of high quality T6061 aluminum with stylish appearance. With higher strength and durability, light weight and corrosion resistance. (Blue Oil Catch Can Diameter: 2.68in / 68.25mm. Height: 4.27in / 108.66 mm.)

Universal fitment, Joins 2.0" OD Pipe to 2.0" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. Come with 2Pcs/Package. reducing costs and time Significantly.

The lap joint clamps 2.0 are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars.

Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection.

Exhaust manifold Stud Bolt Nut Gaskets Kit is designed compatible with Honda Acura B, C, D, F, H series engines. also works for the intake manifold; You can also remove the gasket (exhaust manifold stud designed compatible with Ford 4.6 & 5.4 Liter V8 Engine)

Standard 304 stainless steel studs and serrated flange nuts kit is great replacement for your orginial stud and bolt that are rusted and broken

Exhaust manifold stud nuts kit thread size, M8*1.25MM, also fit other vehicle, such as Chevrolet, GMC, Dodge and so on. Please Check and measure the lengths(50mm) and thread sizes(M8*1.25MM) needed for your specific vehicle application

Fuel cell bulkhead size is -6 AN

Radiused entries for unrestricted flow

Allows you to connect fuel lines to fuel cells

Size: Female AN10 to Male AN6, the thread size of 10an is 7/8-14 UNF, the thread size of 6an is 9/16-18 UNF.

Parameter: Max working pressure: 1500PSI.Temperature range: -65°F-252°F.

Material: Made of aluminum alloy 6061-T6, anodized black surface.

Size: Female AN6 to Female AN6, the thread size is 9/16-18 UNF.

Parameter: Max Working Pressure: 1500PSI. Working Temperature Range: -65℉ to 252℉.

Sealing: The AN side of the flare is sealed by a 37 degree angle.

BASIC FLOW SIZE: All 1/4" body size air fittings. 1/4" NPT. Buna-N seals.

KWIK-CHANGE: Interchangeable/compatible with most manufacturers. Easy push to connect.

MAXIMUM: 40 SCFM. 300 PSI. Temperatures up to 250 degrees F.

[Size] 8AN to 1/2 inch barb, and thread size of 8an is 3/4-16UNF.

[Application] The barb fitting only work with rubber fuel line.

[Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉.

[Size] 6AN to 3/8 inch barb, and thread size of 6an is 9/16-18UNF.

[Application] The barb fitting only work with rubber fuel line.

[Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉.

I/M Type air coupler and plugs with max pressure of 300psi

1/4" Basic body size

All the outside thread with sealant, better sealing

DESIGNED/MANUFACTURED: To exacting standards. This is a Closed/Sealing-type air chuck for use on a compressed airline

DUAL HEAD CHUCK: Makes tire valves more accessible with the two heads for easier access

INFLATE: By hooking the closed head (w/valve) directly to an airline

[Size] 10AN to 5/8 inch barb, and thread size of 10an is 7/8-14UNF.

[Application] The barb fitting only work with rubber fuel line.

[Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉.

✔ INCLUDES 2pcs USA Universal Type Coupler , 1pc I/M Type Female Plug, 1pc Swivel Connector, Steel,allows connection of 2 tools to a single outlet.

✔ 300PSI WORKING PRESSURE - USA Universal Type air coupler and I/M Type plug with max pressure of 300psi.HEAVY DUTY machined construction enhances durabililty.

✔ HIGH CORROSION RESISTANCE - Steel plated nickel coupler features high corrosion resistance and long life.

[Size] The thread size of 6an is 9/16-18UNF. The ID of spring lock is 3/8 inch.

[Seal] The 6an flare efi fitting is sealed at 37 degree angle to avoid leakage.

[Parameter] Working pressure: 1500psi, Temperature range: -40°F to 176°F.

M-STYLE: The industry standard coupler. Milton M-style, ColorFit M-style, + red competitor couplers/plugs are all compatible.

KWIK-CHANGE: Interchangeable/compatible with most manufacturers. Compliant with military specification MIL-C-4109.

NPT: 1/4" female national pipe thread flow size. Case hardened steel drag guard to prevent accidental uncoupling and resist rust. Durable brass. Buna-N seals.

Milton s-765 HI-Flo V-Style 'A,M,V' 1/4" MNPT Brass Body

Milton is your number 1 source for Quality Air Accessories

Since 1943 Milton has been producing Quality Air Accessories

[Size] 10AN to 5/8 inch barb, and thread size of 10an is 7/8-14UNF.

[Application] The barb fitting only work with rubber fuel line.

[Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉.

HIGH QUALITY- 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion, construction.

360 °SEAL PROTECTION - These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. Great secure in any PEX pipe using system.

WIDELY USED- Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing.

Industrial Type D 1/4-Inch NPT

Suitable for M or D type couplers, interchangeable/compatible with most manufacturers.

Common Use to air fitting kit for air tools, air compressor, air nailer, air blow gun, pressure washer, air hose.

Common Use to air fitting kit for air tools, air compressor, air nailer, air blow gun, pressure washer, air hose.

Suitable for M or D type couplers, interchangeable/compatible with most manufacturers.

High quality brass durable, no rust

➤ Durable Solid Brass Construction: Made of brass, long-lasting and resistant to corrosion.

➤ Do The Best to Prevent Leak: All male thread with sealent for no leaking and come with teflon tape.

➤ Easy Connect System: Sleeve guard helps reduce the risk of accidental disconnects and protects the coupler sleeve.

Size: Male -8 AN to 1/8" NPT thread, straight

Made of High Performance Lightweight 6061-T6 Billet Aluminum Material

Surface treatment: Black anodized finish for durability and strength

SUPERIOR PERFORMANCE: AquaAulos hydraulic fittings are made to the highest standards, with our JIC cap and plug kit meeting or exceeding SAE J514 conventions. These industrial heavy-duty JIC fittings are made from premium carbon steel galvanized with robust and long-lasting zinc, which prevents rust, corrosion, and degradation, even with extended use. Over time these fittings are exposed to hose fluid, so this durability is essential. You can trust our products like any leading brands, such as Parker, Eaton Aeroquip, or Gates, as they have been rigorously tested and meet the industry standards for pressure, temperature, and material strength!

PRECISION-ENGINEERED: We understand the importance of heavy-duty craftsmanship, which is exactly what we strive for in every piece in this kit. Our state-of-the-art CNC machine provides ultra-precise production, ensuring that the caps and plugs are made with fine-tolerance thread with good sealing for easy, repeated installation and removal. This extra attention to the manufacturing process enhances the adapter's performance. It provides customers with a competitive advantage through less downtime and extended equipment life, leading to increased revenues and reduced warranty costs.

AVOID COSTLY DOWNTIME: The perfect caps and plugs kit for the mechanic in you. These JIC kits seal and protect the ends of hydraulic hose and tube fittings to prevent hydraulic liquids from leaking onto the ground or into your or your client's machine. While you perform preventive maintenance, it also stops contaminants such as dirt, dust, moisture, and sand from entering and damaging your machine's sensitive and expensive parts, such as Pumps Motors, Valves, and Cylinders.

Female National Pipe Taper (NPT) threads for connecting to male threaded pipes

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

1/4-Inch NPT x 1/4-Inch NPT, Coupling for connecting two pipes with the same diameter in a straight run

Use these fittings to adapter a -8 ORB port to a -6 hose end.

37 degree flare fitting (automotive standard)

Black Anodized Aluminum Finish