Best Etoput in 2026

3 Edge Pyramid cnc engraving bits - Contains 10 end milling cutters, five different cutting degrees (20°/ 30° / 45° / 60° / 90°)

1/8” Shank Router V Bit - Tip: 0.1mm; Overall Length: 25mm / 28mm / 28mm / 29mm / 30mm

Suitable Material - PCB, MDF, ABS, PVC, Acrylic, Nylon, Resin, Plastics, Density board, Wood, Plywood, Hardwood etc.

101pcs Fiberglass Reinforced Cut Off Wheel with 1 Mandrels Included (1/8 inch Shaft Fits Standard Rotary)

This is a cut-off disc - only cuts along its edge. Ideal for cutting, grooving and cutting all kinds of metal and fine wood, plastics and ceramics

With low heat generation and thin cutting line, the cut off wheels are applicable to electric drills, hanging grinders, electric grinders, etc.

Used for routing harder and more rigid plastics in the following materials: Acrylic, Acetal, Nylon, PVC, ABS, Phenolic, Poly (methyl methacrylate) (PMMA) and other MDF, PVC, Wood, Density board, etc.

Nano Blue Coating which enables the tool's cutting edge to retain crucial sharpness and lubricity with an extreme nanohardness and heat resistance. This provides longevity and produces cutting results of the highest quality.

SHANK DIAMETER: 1/8" (3.175mm)Shank; CUTTING DIAMETER: 1/8" (3.175mm); CUTTING HEIGHT: 22mm; OVERALL LENGTH: 45mm.

✅ 𝐓𝐡𝐞 𝐁𝐞𝐬𝐭 𝐂𝐍𝐂 𝐑𝐨𝐮𝐭𝐞𝐫 𝐁𝐢𝐭𝐬 𝐒𝐭𝐚𝐫𝐭𝐞𝐫 𝐒𝐞𝐭 - Confused about choosing the best CNC router bits?For those new to CNC routers, IDC Woodcraft offers the ideal CNC router bits tool kit for carving wood. With these high-quality carbide bits, you'll be on the right track from the start. These bits are made of tungsten carbide steel and are built to last. This American-made set is intended to cover almost any type of CNC project you may design.

✅ 𝐂𝐨𝐦𝐩𝐥𝐞𝐭𝐞 𝐑𝐨𝐮𝐭𝐞𝐫 𝐁𝐢𝐭𝐬 𝐒𝐞𝐭 𝐓𝐨 𝐂𝐨𝐯𝐞𝐫 𝟗𝟗% 𝐎𝐟 𝐘𝐨𝐮𝐫 𝐏𝐫𝐨𝐣𝐞𝐜𝐭𝐬 - Designed to be the workhorse of your cnc wood carving jounery, our bits kit is equipped 90°/60°/30° v-bits, 1/4″, 1/8″ & 1/16" downcut end mills, an 1/8" up-cut 'drilling' endmill, 1/4" & 1/8" ball nose endmills, & 1" surfacing bit and 2 collets. Includes a 2nd bonus 1/8” downcutting endmill bit, making this a 13-piece set.

✅ 𝐎𝐮𝐭𝐬𝐭𝐚𝐧𝐝𝐢𝐧𝐠 𝐖𝐨𝐨𝐝 𝐂𝐚𝐫𝐯𝐢𝐧𝐠 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞 - From elegant cuts & delicate carves, to cool 3D carvings and angled inlays, these bits are designed to deliver it. Use30, 60, and 90-degree v-bits with blade-style edges to create super-clean cuts in groove carving. Ball-nose end mills are used for beautiful accent work and 3D carving. The spiral cutting edges of downcut router bits and up cut end mills give extremely clean finish cuts.

Specs: Arbor 5/8", Chippers (3)1/8" Chippers, (3)spacers, Diameter 6", Teeth 10

Negative hook angles

Features Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance

Dremel's versatile and simple-to-use engraving bits make it easy to express your creativity

Ideal for detailed material removal in applications like shaping, carving, engraving, hollowing, grooving, slotting, inlaying, making tapered holes, or freehand routing. For use on materials like wood, fiberglass, plastic, and soft metals.

The ball shape of the engraving bit can be used to make concave cuts or hollows out material - the tip makes round bottom slots and grooves and can be used for rounded side cut

Dremel's versatile and simple-to-use engraving bits make it easy to express your creativity

Ideal for detailed material removal in applications like shaping, carving, engraving, hollowing, grooving, slotting, inlaying, making tapered holes, or freehand routing. Use bits on materials like wood, fiberglass, ceramics, plastic, jewelry and soft metals.

The ball shape of the engraving bit can be used to make concave cuts or hollows out material - the tip makes round bottom slots and grooves and can be used for rounded side cuts

This round over router bit has a 3/4" radius and 3/4" cutting depth. The shank is 1/2" in diameter.

Add a round over edge to a variety of surface edges and projects or create small moldings to be used on its own or as part of a molding build-up

Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge

Premium Carbide

60° & 90° V groove

15° Detail carving liner

Specs: Number of Cutters 2, Overall Dia. 1-1/2", Overall Length 3", Shank Dia. 1/2", Carbide Height 1-1/4"

Freud Tico Hi-Density Carbide

Clean cuts in solid wood, plywood and composites

Specs: Bearing Dia. 1/2", Number of Cutters 2, Overall Dia. 1/2", Overall Length 3-5/8", Shank Dia. 1/2", Carbide Height 1-1/2"

Cuts all composition materials, plywoods, hardwoods, and softwoods

Use on hand-held or table-mounted routers

VERSATILE ROTARY TOOL KIT : Includes 3000 corded rotary tool, 2 attachments, 28 high-quality Dremel accessories, plastic storage case, and accessory case

HIGH PERFORMANCE 1.2AMP MOTOR : Provides maximum power and performance at all speeds

6 VARIABLE SPEEDS : Provide greater control and maximum accessory versatility and precise tool control (5,000 – 35,000 RPM)

DURABLE – Multipurpose wood router bit set – delivers precision and durability

MULTI-PURPOSE – Varied 15-bit set – use for finishing in a wide range of applications

VERSATILE – bits are designed for processing soft and hard wood as well as wood composites

Solid Carbide spiral upcut router bits with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length

The CNC Router Bits is suitable for Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits

DURABLE – Multipurpose wood router bit set – delivers precision and durability

MULTI-PURPOSE – Varied 30-bit set – use for finishing in a wide range of applications

VERSATILE – bits are designed for processing soft and hard wood as well as wood composites

2D/3D CARVING ROUTER BIT – Made in the USA. The Spektra 2d/3d carving router bit is specially designed for 2D and 3D CNC profiling and carving in plastic and wood with CNC machines.

FOR PLASTIC AND WOOD – Use these CNC router bits for plastic and router bits for wood-working for 2D and 3D large-scale carving.

GREAT FOR DEEP PROFILING – This carving/profile router bit is a perfect bit for 3D carving. Great for dimensional signage, 3D millwork, 2D/3D contouring, profiling, modeling, pattern making for cabinetry, sign making, furniture, and jewelry mold making.

Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length

The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits

RD2100

Down Cut Spiral

Industrial Quality

🔧 KOWOOD 35 pcs set is a common variety to cover most woodwork needs

🔧 C2 Carbide for clean and accurate trimming, edging, grooving for all type of wood material

🔧 This 35 pcs set is the most cost-effective sets. Ideal budget for beginner

▲ DURABLE STEEL BODY - Boasting alloy blade, balanced craftsmanship and a solid hardened steel board these woodworking tools can withstand some heavy duty use and the test of time. Their clever anti kickback design ensures safe installation

▲ USE OF SAFE - The 1/4 inch shank bits provide greater stability and less vibration during use

▲ WIDELY APPLICATIONS - These tongue and groove router bit set is truly versatile for your extra convenience. Works great with woods, MDF, particle board, plywood compact panel. ▲DO NOT cutting ferrous metal and non wood materials, such as: steel, iron, sand, etc▲

357 Pcs Rotary Tool Accessories Kit: The carefully selected 357 Pcs accessories include sanding bands, sanding papers, cutting wheels, grinding wheels, grinding needles, Hss cutter, flap wheels, brass brushes, steel wire brushes, mandrel, 4 pcs collet, and wrench, etc. Very suitable for sanding, polishing, cutting, sharpening, drilling, cleaning, carving, etc. Can be used for wood, glass, ceramic tiles, plastic, metal, etc.

Multi-Purpose Accessories Kit: 357Pcs accessories kit is the complete kit you need to complete a different projects. Ideal for home improvement, hobby, craft and whenever you need to sand, polish, grind, drill, cut, carve, engrave and more. This kit is universal fitment for all major brands.

Added Accessories: Equipped with APEXFORGE special chuck collet(1/16”, 3/32” and 1/8”)1.6mm, 2.3mm and 3.2mm*2 and cloth wheel for polishing jewelry, glass, jade; Flap wheel for polishing heavy duty material; Diamond cutting disc for cutting jade, thin iron plate.

The product is 1/8 straight router bit

Easy to use

The product is manufactured in China

For controlled cuts in drywall

Guidepoint tip traces around outlet boxes and can lights

For use with RotoZip Spiral Saws

Used for edging and grooving wood, Dremel router bits are ideal for routing, inlaying and mortising in wood and other soft materials

The corner routing bit is designed for decorative cutting of edges and rounding corners in wood and other soft materials

Working diameter: 1/8-in (3.2 mm), shank: 1/8-in (3.2 mm), material: carbide tipped

Rout, edge, inlay, and mortise in wood

Constructed of high-speed steel

Reusable plastic storage case included

【✺PREMIUM MATERIAL】The 20-piece carbide burr set is made of high-quality tungsten carbide, strong and durable. Carbide burr is suitable for wood, iron, carbon steel, alloy steel, stainless steel, copper, aluminum and other metals such as marble, jade, bone, etc. It is an essential tool for any wood or metal carving.

【✺PERCISION AND EFFICIENCY】After engraved by the die grinder bits, the carbide rotary bit has a smooth surface and will not generate dust and pollution. Especially the engraving drill bit, 3mm is suitable for fine work, its efficiency is higher than that of manual files, and the specially designed multi-groove carbide burr greatly improves the work efficiency.

【✺TUNGSTEN = DURABILITY】Tungsten carbide grinding points are easy to use, safe and reliable. Its durability is much higher than that of high-speed steel tools, and more than 200 times that of small grinding wheels.

Dremel router bits are ideal for routing, inlaying and mortising in wood and other soft materials. Used for edging and grooving wood.

Straight Router bits are flat on the bottom for cutting square grooves, rabbets and dadoes, and for leveling recessed areas.

Working diameter: 1/4-in (6.4 mm), shank: 1/8-in (3.2 mm), material: carbide tipped

Turn your rotary tool into a powerful cutting machine

Ideal for cutting drywall for electrical boxes, air vents and other wall features

Piloted tip to cut around outlet and switch boxes

▲ DURABLE STEEL BODY - Boasting alloy blade, balanced craftsmanship and a solid hardened steel board these woodworking tools can withstand some heavy duty use and the test of time. Their clever anti kickback design ensures safe installation

▲ USE OF SAFE - The 1/4 inch shank bits provide greater stability and less vibration during use

▲ WIDELY APPLICATIONS - These tongue and groove router bit set is truly versatile for your extra convenience. Works great with woods, MDF, particle board, plywood compact panel. ▲DO NOT cutting ferrous metal and non wood materials, such as: steel, iron, sand, etc▲

Diameter (D) 3/8

Cutting height (B) 1

Shank (D) 1/4