Best Feiton in 2026

UNIVERSAL BATTERY DISCONNECT SWITCH - High current battery disconnect switch is designed to cut off the electrical power of the electrical system, which protects against electrical fires and theft when equipment is not in use and provides a reliable way to shutdown electrical power during maintenance and protect batteries from excessive battery drain. Disconnct the battery when you are not driving a car / boat / RV / vehicle / ATV / Trailers / Off-road, etc. Keep you safe all the time.

APPLICATIONS - Rated to 200 Amps continuous duty, 1000 Amps intermittent duty, used for 12-48 VDC systems to isolate and secure the electrical system. Master battery disconnect switch is widely used for ATVs, Trailers, UTVs, Cars, Marine Outboard, Off-road, RVs, Trucks, Heavy Vehicles, and electrical equipment's switch.

PREMIUM QUALITY - Master battery disconnect switch with face plate is made of robust aluminum alloy heavy duty housing, strong weather resistance and long service lifespan. It can protect the internal components of the switch for use in the harsh condition. Replace part number: 20701, 062790.

Notice!!! The distance between the lenses of the two products should not exceed 15m!!! If the product does not work after installation, please troubleshooting by referring to the product details page.!!!

Fit for Liftmaster Sears Chamberlain Craftsman (1997+) garage door openers with safety sensor. Replacement aftermarket parts for safety sensors 41A5034 & 41A5266-1, automatically opens the door if there is an obstruction.

Your garage opener must be equipped with safety sensors!!!!! If not, installing this accessory will not add the feature. The length of the wire is 34cm, If your connection is far from the door, you need to equip with an extension cable.

!!!!!Note: For facilitate installation, the black negative wire has been installed at the bottom of the battery switch. Please pay attention to the installation instructions; If your car stereo can not be completely power off, then once you use our product to completely disconnect the battery, the stereo needs to be re-matched when you start the vehicle again!!!

REPLACEMENT REMOTE BATTERY DISCONNECT SWITCH - Wireless kill switch enables you to kill your car battery power with remote control, which can help to prevent battery drain and protect the circuit. Besides, car battery disconnect switch can disconnect the power of your car, the theif cannot start and stole your car. Just press the remote control button to disconnect your car power system, easy to use and improve security!

WIDE APPLICATIONS - Remote battery disconnect switch works well for Car, Truck, RV, Travel Trailer, Camper, SUV, ATV, UTV, Marine, Van, Boat, Agricultural Vehicle Trike Auto Off Road Jeep and other engine applications with a 12 volt battery.

!!! Note: On some models of vehicles, after the remote control of this product is used to disconnect the vehicle battery and turn it on again, you need to wait about 6s before pressing the vehicle start switch to start the vehicle.

PREMIUM QUALITY - Durable and Reliable. Rated current 200A, Starting current 500A, DC12V, this Battery Disconnect Isolator is upgraded from the old model as the improved fittings make mounting contacts stronger. All required wiring harnesses included, no need to buy additional accessories.

REPLACEMENT REMOTE BATTERY DISCONNECT SWITCH - Wireless kill switch enables you to kill your car battery power with remote control, which can help to prevent battery drain and protect the circuit. Besides, car battery disconnect switch can disconnect the power of your car, the theif cannot start and stole your car. Just press the remote control button to disconnect your car power system, easy to use and improve security!

REPLACEMENT AIR FOOT PEDAL - The riveted aluminum plate at the bottom of this foot pedal helps to protect the pedal from breaking or puncturing when working on uneven ground. Protect your safety while using the drain cleaning machines.

WIDE APPLICATIONS - FEITON air foot pedal is compatible with most of the drain cleaning machines like Ridgid K-400, K-380, K-3800, K750, K-7500, General, Spartan, Electric Eel and other air- activated drain cleaning machines. DO NOT compatible with the Harbor Freight Hydrostar Drain Cleaners. Please check the size and applications before ordering.

PREMIUM QUALITY - Air-activated foot pedal features a heavy-duty neck bulb molded integrated structure and unique non-metal structure, which can make sure that this foot switch can work in any humid environment.

【Large Capacity】This tobaccopipe bag can hold 2 pipes and other tobacco pipe accessories, easy to carry andperfect for outdoor activity.

【Leather Pipe Pouch】High-grade PU leathermaterial, soft, delicate ,durable and dampproof, stainless steel zipper improvingthe quality of the pipe bag, this tobacco pipe bag is a good partnerfor your pipe and accessories.

【Portable And Convenient】Approximately 7.5 x 3.8 x 2.3inches,about 0.35 pounds, portable and very convenient.

UNIVERSAL STAIR TREADS GAUGE TEMPLATE TOOL - Stair tread template tool enables the treadle installer to measure the length and angle easily and accurately without a measuring tape. Easy to use and save plenty of time for measurement. No more shoddy stairs after easy operation.

ADJUSTABLE ANGLE - Stair measurement layout tool works well to measure stair treads, risers and shelves. The adjustable angle is 0°- 300°, you can adjust the angle, length or height according to your need. Shelf layout tool & stair tread jig can be widely used in many woodworking environments, specially designed for laying out wooden stair treads, wooden floors, closet and windowsill. Nice choice for DIY woodworking.

PREMIUM QUALITY - Stair jig tool are made of superior aluminum alloy, durable and wear resistant. The surface is treated by anodizing to prevent discoloration in high-temperature environments or wet condition. The scale is etched by laser for better accuracy. Bolts are portable and reusable. Complete kit for direct fit!

Please confirm the width of the slot for the T style Track Retainer Base under the garage door before purchase!!!! T style Garage door sealing strip, 3-3/4" width, three lengths optional: 9FT, 16FT or 20FT. And easily cut to any length to fit the desired size of the garage door.

Form effective isolation with the outdoor, keep the garage clean and tidy, Seals garage door to keep out cold air, rain, dust, leaves and pests.

High quality material, soft and hard moderate, Even if the ground is uneven, it can fit tightly, form a closed space.

High Quality - Alloy panel, Black Outlet made of High-Impact Thermoplastic materials, Waterproof, flame retardant, high temperature resistance, wear resistance, high safety and durability.

Certification - AU/CU/UL APPROVED, NEMA 14-50R Commercial/Industrial Grade heavy duty receptacle outlets, 50 Amp, 125/250 Volt, high-power receptacle, 3-Pole, 4 Wire, neutral wire is required. A high-quality socket is the foundation of protecting the safety of electricity.

Unique DIY - Easy to install, the details page shows the connect wire mark corresponding to each interface. You can choose the appropriate shell to assemble according to your preference, but be careful to see if the size fits.

7pcs Multi-function Cutter Head Set - Contains 1 key & 6 different cutter head (Straight spiral cutter head, Grease cutting head, Olive cutter head, Shovel head, Four-flute cutting head, Spiral serrated head), deal with all kinds of congestion problems. Superior Quality & Rust-proof - Made of manganese steel, the surface is treated with rust prevention, sturdy and durable, high hardness, wear resistance, Often work in wet environment, also don't worry about rust.

Easy to Install & Quick Knockdown - Installed on the drain cleaner to use. There are two small holes under the cutter head, which can be fit directly with the spring. the cutter head can be easily removed by the key insert the small hole.

Fast & Efficient - Combined with drain cleaner, it's unstoppable. Quickly break through all kinds of blockage, whether it is hair, leaves, branches, grease or fruit pit, etc. Widely application, suitable for all kinds of pipes, for families, kitchens, living rooms, bathrooms, hotels and other occasions.

For use with 12, 24 and 32 Volt Marine Electrical Systems

Capacity - 250 AMPS Continuous, 360 AMPS Intermittent

Ignition Protected

Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads

Ignition protected—safe for installation aboard gasoline powered boats

IP66 waterproof, ISO 8846 and meets ABYC requirements

60A

Water Proof

Splash & Dust Proof

Permits selection between batteries for starting, charging or operation in parallel

For use with two or more batteries and systems under 50V

UL listed, ignition protected and CE approved

Blue Sea Systems Battery Switch m-Series ON/OFF with Knob, part number 6006, is a Single Circuit ON-OFF switch. Switches a single battery to a single load group

IP66 waterproof, ISO 8846 and meets ABYC requirements. Ignition protected—safe for installation aboard gasoline powered boats

Make before break contact design allows switching between battery banks without power interruption

🔋【Material】: Heavy duty battery shut off switch made of ABS plastic housing, and the 4 sets of bolts is tinned copper studs(2 x 3/8" (10mm) & nuts for ignition protected to distinguish the different gears easily which you switch to even at night.

🔋【Easy Operation】: RV Battery switch with On/Off position in clear color labels. Switch ON=Power (green) to closed circuit, Switch OFF = No power (red) to the cut-off circuit.

🔋【Compatible 】: Used for 12-48V, 275 A continuous at DC 12V, 455 A intermittent at DC 12V, 1250 A momentary at DC 12V, battery selector switch can stand alone or be locked together with other switch for minimizing battery loss and preventing electric leakage effectively.

Easy to Use Kit for a Professional Installation

High Current (180A Continuous/1000A Intermittent) Battery Disconnect Switch with Black On/Off Plate

Contains #2 3/8" Copper Lugs, Heavy Duty Heat Shrink, and Rubber Terminal Insulators

Rated to 180A Continuous or 1000A Intermittent

Mounts in 3/4" Hole

Provides Single Power Cut off to Entire Electrical System

Polycarbonate body with brass terminals

Dimensions: 5-1/4" diameter x 2-5/8" depth, 5/16" terminal stud size

For use with 6 to 50 volt marine electrical systems

Switches a single battery to a single load group Ignition protected - safe for installation aboard gasoline powered boats

IP66 waterproof, ISO 8846 and meets ABYC requirements

Accepts two 4/0 AWG (95mm²) battery cables.

Simple Operation:Switch on = Power; Switch off = No power.Rating: 275A DC Continuous (1hr), 455A DC Intermittent (5 min), 1250A DC Cranking (10 sec); Stud Size: 2x3/8" (10mm)

Durable Material: This battery disconnect switch is made of ABS plastic housing, tinned copper studs and nuts.Come with 4 stainless steel mounting screws and caps to help fix the switch tightly. 4 Removable side plates provide access for battery cables

Safety Protection:battery shut off switch can disconnects the battery safely, protect batteries from excessive drain when vehicle or boat is not in use

Rotary Switch

Panel Mount

125 amp 12V

Battery Holder Type: 9v battery holder with switch, 9v battery holder with on off switch

Battery Holder Voltage Output: 9V, 1 x 9v battery holder= 9 volt battery holder with leads; Battery Holder Switch Function: ON/OFF switch on 9 volt battery case holder

9 Volt Battery Holder Dimensions: (L*W*H)/2.657" x 1.299" x 0.835"/6.75cm x 3.30cm x 2.12cm

MICTUNING 5 Pin on-off Rocker Switch is SPST designed(Single pole single throw) switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lights

PERFECT APPEARANCE: built in two premium LEDs emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark

STURDY DURABILITY: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability

Heavy Duty: ABS plastic housing, durable made for safety use, rear cover insulates terminals against any short of circuits, equiped with 4 sets of bolts.

Operation: On/Off 2 positions, 275 A continuous at DC 12V, 455 A intermittent at DC 12V, 1250 A momentary at DC 12V.

Compatible: used for DC 12 - 48 V systems to isolate and secure the electrical system, can stand alone or be locked together with other switch.

Heavy Duty: ABS plastic housing, durable made for safety use, rear cover insulates terminals against any short of circuits, equipped with 4 sets of bolts.

Operation: On/Off 2 positions, 275 A continuous at DC 12V, 455 A intermittent at DC 12V, 1250 A momentary at DC 12V.

Compatible: used for DC 12 - 48V systems to isolate and secure the electrical system, can stand alone or be locked together with other switch.Its purpose is to eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely.

Push button switch with highly visible red button is suitable for any momentary function

Positions: Off – Momentary On

Requires ½ inch mounting hole

Heavy Duty: ABS plastic housing, durable made for safety use, rear cover insulates terminals against any short of circuits. Design for 2 batteries vehicles, can switch battery 1 / battery 2 separately or both on and off.

Purpose: eliminate any power from the battery when vehicle or boat is not in use, disconnects the battery safely.Avoid battery drain off.

Operation: 1-2-Both-Off,4 positions, 200A continuous at 12VDC, 300A intermittent at 12VDC, 1000A momentary at 12VDC.

Laser etched backlit with two LED lights

Single pole double throw on-off-on switch

All symbols are laser etched directly onto the switch face to ensure long image life