Best Feuling in 2026

The patented Feuling Superpump incorporates a highly efficient gerotor design that is capable of supplying 40% more volume and 60% increase in scavenge volume of oil capacity over your stock oil pump

Full travel hydraulic lifters made from machined steel

Exceeds the needs of large-lift camshafts and higher spring pressures with a slower bleed down rate

Maintains proper and critical oil flow to valves, springs, rockers, shafts and replacement valve guides

Feuling highly recommends using one-piece pushrods instead of adjustable pushrods to maintain maximum cam/ replacement valve lift and reduce valvetrain harmonics and associated hydraulic lifter issues

Fixed length, 4130 chromoly one-piece pushrods with swedged formed ends

Heavy-duty 7/16in. diameter tube with a wall thickness of 0.165in.

Cam chain tensioner conversion kits include the needed components to upgrade early 99-06 style mechanical cam chain drive systems to the late 07-17 hydraulic cam chain drive systems

Kits include a Feuling OE+ billet oil pump and camplate, Feulings billet hydraulic tensioners, cam chains, sprockets, sprocket alignment spacers, TimkenR/Feuling bearings, needed gaskets, O-rings, ARPR cam, crank and tensioner hardware, LoctiteR and moly lube

Cam chain tensioner conversion kits include the needed components to upgrade early 99-06 style mechanical cam chain drive systems to the late 07-17 hydraulic cam chain drive systems

Kits include a Feuling OE+ billet oil pump and camplate, Feulings billet hydraulic tensioners, cam chains, sprockets, sprocket alignment spacers, TimkenR/Feuling bearings, needed gaskets, O-rings, ARPR cam, crank and tensioner hardware, LoctiteR and moly lube

Mobil 1 Advanced Full-Synthetic Motor Oil 10W-30 Utilizes Mobil 1’S Signature Triple Action Formula To Deliver Outstanding Engine Performance, Protection, And Cleanliness.

Helps Protect Critical Engine Parts For Up To 10,000 Miles Between Oil Changes,* Controlling Oxidation To Prevent Oil Breakdown And Maintaining Excellent Viscosity

Meets Ilsac Gf-6 Standards To Help Provide Low-Speed Pre-Ignition (Lspi) And Timing Chain Wear Protection While Keeping Your Engine Clean And Helping To Improve Your Fuel Economy

Standard Volume

Standard Pressure

Cast Aluminum Housing

60 psi stock pressure relief spring provided

No modifications required to install

Threaded pressure relief nut. Drive Type- Crankshaft

High Volume

Standard Pressure

18% Increased Volume Over Stock

Made In U.S.A.

Stress proof steel

5.96 Inch Length

Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.

We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure.

LS1 style allen head bolts are included for installation. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor

Package Dimensions: 60.705 cms (L) x 31.75 cms (W) x 60.705 cms (H)

Product Type: Auto Accessory

Package Quantity: 1

【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport.

【 Dual-Purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed: 1.8L/min.)

【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil.

Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid evacuator pump

Double Duty: For pneumatic extraction, insert the suction hose in the engine oil extractor receiving hole; Manually suction fluid with the engine oil pump's oversized handle

Don’t Cry Over Spilled Oil: The 1.5 gallon reservoir is a solid one-piece tank that can't leak out the bottom; The built-in shutoff prevents overfilling the reservoir

Grade Type : Regular

Gasket Or Seal Included : No

Housing Material : Cast Iron

Package Dimensions: 10.07 L x 4.98 H x 7.24 W (inches)

Package Weight : 6.9 pounds

Country of Origin : United States

Fit type: Vehicle Specific

Package Weight: 1.587 kg

Package Dimensions: 15.748 L x 13.208 H x 21.082 W (cm)

Lower unit gear oil formulated to protect against corrosion and excessive wear

Designed for outboard motor lower unit and sterndrive applications above 75 HP

Extreme pressure synthetic additives protect gears from metal to metal contact

Match Bottle and Tubing Size : this Oil Analysis Sampler for standard bottle 38mm neck bottles and tubing size 3/16 - 5/16, also suitable for 5-40, 10-40, and 80-140. The sample port works amazing.

Multi Applications: the sampler can be used for accurate oil analysis, it is widely used for manual oil sampling of hydraulic system, oil cylinder, gearbox, turbine unit, motor, engine, cooler, heater, automobile oil tank, etc.

High Efficiency: matches with standard oil analysis sampling bottles and tubing, which can effectively prevent the oil from adhering to the oil gun and polluting the oil sample by external impurities. This oil extractor works flawlessly to take oil samples on over hundreds of machines with no cross contamination, speed up the process from the old procedure by 100%.

Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid evacuator pump

Easy Oil Change: No more crawling under cars for oil changes; This topside oil extractor pump pulls oil from the dipstick tube, allowing you to stay right side up the whole time

Move Fluid with Less Mess: An automatic shutoff valve and single piece construction are the cleanliness dream team, helping you keep the fluid off your floor

Most LS oil pickups are secured to the oil pump using only 1 bolt on one side of the flange. This girdle straddles the flange and secures the pickup tube to the oil pump with 2 bolts for maximum clamping capacity.

Compatible with all LS series engines 1997-2014

Made in the Wichita, KS from aerospace grade, USA billet aluminum

Made in United States

Package Dimensions : 8.0 L x 5.5 H x 6.0 W (inches)

Package Weight : 3.4 pounds

High Volume

Standard Pressure

25% Increased Volume Over Stock

【2 WAY USAGE】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with.

【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode.

【NO OIL LEFT】 Vacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil.

VERSATILE FLUID PUMP: The Performance Tool W1139 Quart/Gallon Fluid Pump and Hose is a versatile tool that can fit both quart and gallon size containers with its unique double threaded cap.

EASY TO USE: This fluid pump is designed to be convenient and easy to use, especially in hard-to-reach places. Say goodbye to messy oil changes and wasted fluids!

SAVES TIME AND MONEY: With this fluid pump, you'll be able to quickly and efficiently change the oil in your vehicle, saving you time and money in the long run.

Standard Volume

Standard Pressure

Gasket Included

High Pressure

Standard Volume

Includes optional +25 psi high pressure spring for the COPO Camaro engines.

Galvanized Steel

Made In U.S.A.

0.75 Inch Length

Galvanized Steel

Made In U.S.A.

2.150 Inch Length