Best Fiberpunk in 2026

【3D PRINTER WIFI PRINTING】 With Node Pro, you can Real-time check the printing status and control your printers anywhere and anytime by PC/Phone browser

【HIGH SPEED,HIGH QUALITY】Node Pro is based on SD card printing, Node Pro realizes sharing SD card with 3D printer, and directly transmits Gcode to the SD card of 3D printer, achieving high quality, high speed printing

【EASY TO USE】 Support Cura/PrusaSlicer upload gcode file directly to Node Pro after slice job finish

【Design Concept】X-CF PRO is a 3d printer specially designed for printing carbon fiber and nylon filaments.Independent research and development of the latest generation single extruder system, which uses high-temperature alloy material, dual-gear extrusion, can solve the problem of the accuracy is not very accurate or service life is not long when printing carbon fiber. Another set of normal high-speed extruder can easily print PLA, ABS, PETG and other filaments.

【Precision Manufacturing Process】QIDI TECH using industrial-grade manufacturing, dual z-axis and industrial guide, can achieve high precision, fast printing. Upgrading the XYZ structure, all use of industrial slides. PEI printing plate, solve printing models warp and other problems.The 3d printer’s structure is developed for the effective and accurate printing of carbon fiber.Meanwile, printing other common filaments, the speed can be increased to 120cc per hour.

【New technology upgrade】 A new automatic intelligent leveling mode, taking points up to 20 points to calculate the travel prime. With the new upgraded software, it is more intelligent, especially provide more effective and accurate parameters for printing carbon fiber and nylon filaments, which can be used right out of the box. The main board is made of main core Cortex-M4 and TMC2208 driver chip, matched with 800*480mm 5 inch HD capacitive display.

【Main Control Chip】Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6 or STM32G0B0RET6;

【Three CNC Fan】Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working;

【Increased Heat Sink】Redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly improve the heat dissipation performance;

【9.25'' Larger LCD Screen】 ANYCUBIC Photon mono X 6k 3d printer is equipped with a 9.25inch monochrome screen, which is 138% larger than a normal 6-inch screen. The monochromatic screen lasts 4X longer than the RGB LCD screen, and a special replaceable scratch-resistant film is added above the screen to save your maintenance costs.

【Achieve Larger Print Volume】 The ANYCUBIC Photon Mono X 6K Resin 3d printer can print up to 9.6 x 7.8 x 4.8 inches (HWD). The large volume can print large-size models or multiple models at one time, effectively improving your work efficiency.

【High Precision & High Resolution】 The Photon Mono X 6K LCD screen has a high resolution of 5,760 x 3,600 px and a contrast ratio of over 350, which can fully express the details of the character model's hair, fingers and so on. 40 bright LED lights arranged in a matrix provide intense and uniform exposure in each layer of print, improving print quality and accuracy.

❤【32 Bit High Performance Microprocessor】TFT35 V3.0.1 touch screen uses 32 bit ARM level Cortex-M3 series GD32F205VCT6,120MHz frequency Microprocessor, which makes it an upgraded replacement of LCD12864

❤【Two Working Modes】TFT35 V3.0.1 Touch screen support UART serial port screen mode(touch screen mode) and 12864 screen mode,serial screen mode supports both SD card and USB stick printing.

❤【12864LCD Mode】The 12864LCD mode includes EXP1, EXP2, EXP3, where EXP1 and EXP2 are general motherboards LCD screen interface, while EXP3 is the LCD screen interface used by E3 series boards (like SKR MINI E3,SKR E3 DIP, etc.)

❤【Touch Screen for Ender 3 】Appearance size: 93*87mm, power input : 5V. This is a 3.5 inch full-color screen with ultra clear interface and responsive touch, it is designed for ender 3 3d printer especially, which can be a drop-in replacement for its original LCD screen.

❤【Two Working Modes】TFT35 E3 V3.0.1 touch screen support UART serial port screen mode (touch screen mode) and 12864 screen mode, it can replace original display of Ender 3 3D printer. You can enjoy two printing modes: SD card and U disk.

❤【More Extension Ports is Reserved】TFT35 E3 V3.0.1 display r eserve the extension port of filament breaking detection,automatic shutdown after printing,also WIFI function can be realized by external WIFI module through WIFI port.

90% Pre-installed Make It Easy: Anycubic Kobra Neo is a 90% Pre-installed 3D Printer, which make it possible to set up within 10 minutes. It can print perfectly right out of the box and this would make any beginner to be a great printer enthusiast, which is more suitable for beginners than other DIY 3D Printers.

Direct Drive Extruder Make It Precise Control: The Direct Drive Extruder realizes smooth feeding and discharging of flaments and compatible with more flexible filament such as TPU/PLA/ABS/PETG. It is more lighter, features less inertia and more precise printing, can restore the form of the model to the greatest extent.

PEI Spring Steel Platform Make It Easy Removal & Cost Saving: Compared with other FDM 3d printers, double-sided magnetic PEI spring steel platform is more durable and lasts longer, saving a lot of maintenance costs. You can remove the model easily.

⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin.

⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance.

⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer.

🌲 2004LCD is a smart display controller with display format of 20 characters x 4 lines(80 characters in total).

🌲 2004 LCD smart controller can be used in 3D printer and supports for RAMPS 1.4 control board. It can also be used on copiers, fax machines, laser printers, industrial test equipment and networking.

🌲 2004LCD smart monitor controller allows you to print your 3D designs without PC, and just with a g-code design stored on the SD card.

The main control uses the ARM-level Cortex-M4 series with a 32-bit dominant frequency of 168 MHz STM32F407ZGT6 chip, performance is greatly improved.

Equipped with highly modular open source firmware Marlin2.0, it is convenient for users to DIY and further-development, to avoid the worry of not being able to master the core code.

Motor driver support :TMC2209,TMC2208,TMC5160,TMC2130,ST820,LV8729, DRV8825,A4988, etc.Display screen support: BIGTREETECH- 2.8 inch TFT,BIGTREETECH-3.5 inch TFT, LCD2004,LCD12864.

3D Printer Controller RAMPS 1.4 interfaces an Arduino Mega2560 board. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion

With LCD 12864, you can easy connect it to your Ramps board using the "smart adapter" included. After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.

It is designed to fit the entire electronics needed for a RepRap in one small package for low cost

The fifth stepper motor output port can be customized as a Z-axis motor or a second extruder.

Can be extended to control other accessories.

Three field effect transistors, three heater / fan output ports, three thermistor circuits.

🌟【High Compatibility】SKR MINI E3 V3.0 Control board compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs.

🌟【Multiple Functions】It Supports BLTouch, RGB lights, blocking detection, shutdown function. What ’s more, it also supports TFT35 E3 V3.0/TFT35 V3.0/TFT28 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer.

🌟【Superior Heat Dissipation Performance】New Upgraded SKR MINI E3 V3.0 main board is equipped with a large Aluminum heat sink of stepper motor driver instead of pieces small heat sink, this design is able to increase the heat dissipation performance of the motherboard by 20% which greatly strengthen the heat dissipation capacity of the driver totally.

【64-bit Strong Computing Power】The Creality Sonic Pad features a large 7" color touch control screen and the Klipper firmware runs fully on a powerful 64-bit computing platform that delivers amazing performance. With hardware and software integration, you'll get the best experience with less hassle.

【Advantages of Klipper Firmware】It is able to achieve high-precision stepper motor motion control, thus ensuring the stability of the printer at a faster 3D printing speed. The unique pressure compensation function is to reduce the nozzle overflow by compensating the pressure inside the nozzle. Resonance suppression can reduce the system vibration and reduce the striations on the model surface.

【Speed up Printing without Qaulity Loss】This 3d printing Pad uses precise algorithms to control the motors for faster printing speed. The built-in input shaper function will mitigate oscillation during high-speed printing and keep the model quality smooth.

Large Print Size & Auto Leveling, Small body but Large printing volume of 9.6"(L) x 9.6"(W) x 10.2"(H) / 245 x 245 x 260mm, ANYCUBIC Vyper 3D printer equipped with intelligent leveling system, accurately detect 16-point and automatically adjust the height of nozzle to platform, 1 click to auto leveling, which is friendly use for both veterans and recruits.

Accurate & Silent Printing, Vyper FDM 3D printer Equipped with new 32-bit motherboard and high-performance Cortex -M3 architecture main control chip, enable the system to run faster and smoother. TMC2209 silent driver makes the motherboard have both silent printing and precise voltage output control, ensuring a more accurate and silent printing.

PEI Spring Steel Magnetic Platform, Vyper 3D printer adopted a new platform of a special coating combined with spring steel, which features non-deformation at high temperature, scratch-resistant coating and easy model removal by bending or popping. Widely compatible with PLA/ABS/PETG/TPU filaments.

【Speed Up Printing While Keep the Quality】Creality sonic pad uses precision-oriented algorithms to command the motors for higher printing speed. The built-in input shaper fanction will mitigate oscillation during high-speed printing and smooth out ringing, thus keeping the model quality.

【Highly Integrated with Strong Computing Power】Beneath the large 7-inch touch control screen, the Klipper firmware runs in full swing on a powerful 64-bit computing platform. With software-hardware integration, you will get stunning performance.

【Wide Compatibility】Sonic pad based on klipper firmware can connect to almost any ender 3D printer on the market via a USB cable. By updating the system, it has been pre-configured for Ender-3 Pro,Ender-3 V2/Neo,Ender-3 Max/Neo,Ender-3 S1,Ender-3 S1 Pro,Ender-3 S1 Plus,Ender-5 S1,Ender-5 Pro,Ender-5 Plus 3D Printer, so you can get it going in seconds. The rest of Compatible Creality 3d printers will catch up soon.

Smart G-sensor Auto Leveling: Supports gravity sensing conduction leveling. This provides more accurate leveling, higher detection sensitivity, and using software optimization, more precise compensation in printing, making the model more accurate.

Modular Design FDM 3D Printer: Our new generation of 3D printer integrates the functions of 3D printing, laser engraving, suitable for DIY home school. Compatible with PLA/PLA+/ABS flexible filament. When using laser engraving, supports bamboo, ceramic tile, wood, leather, and kraft papers for carving.

Ultra Fast Cooling & Supports Night Mode: LOTMAXX Shark V3 stays cool while printing, thanks to its modular nozzles' unique and signature design. It offers the unique possibility to achieve dual color printing effect by switching filaments. Shark V3 also supports night mode, with LEDs on the print head to light up dark rooms.

2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an for Arduino shield for easy service, part replacement, upgrade-ability and expansion. for Additionally, a number of for Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.

LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.

※【32 Bit Microprocessor】: Adopted ARM Cortex-M3 series STM32F207VCT6 master controller chip with 32-bit CPU main frequency of 120 MHz, BTT TFT35 V3.0.1 touch screen can perfectly replace the LCD12864 screen for use.

※【Dual Working Modes】: BTT TFT35 V3.0.1 display enables two different modes, with options for either LCD12864 Encoder Mode, or the modern Colour Touch Screen Style. It also supports both SD card and USB stick printing.

※【More Reserved Extensions】 :TFT35 V3.0.1 touch screen reserves the extension ports of filament break detection, automatic shutdown after printing, also WIFI function can be realized by external WIFI module through WIFI port.

1.The Mini12864 display panel has RGB multi-color backlight and can support 8 RGB, which is even more cool.

2.With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing.

3.Product comes encoder parameter adjustment can be achieved, and the file selection print.

👉【Patented Dual Extruder】Excellent industrial design, high-end manufacturing, it can be used out of the box and support dual color print and dual material print. Ventilative printing or enclosed printing for you to choose when printing the different types of filament.

👉【Heating Bed】Rapid steady heating prevent model warping much easier to take down models. And better quality by using cooling fan. Creator pro support PLA, ABS, PVA, HIPS, TPE, TPU and PETG etc.

👉【Precision Manufacturing Process】Creator Pro using industrial-grade manufacturing,double linear guide design,can achieve high precision, fast printing.

⭐【Main Control Chip Features】This SKR Mini E3 V2.0 motherboard uses the STM32F103RCT6 main control chip, and its flash memory size is 256K.

⭐【CNC Fan】Because the fan on the SKR Mini E3 V2.0 control board is a CNC fan, you need to set the wind speed before using it. (Note: V2.0 version of the fan is not ready to use after power on).

⭐【Hot-bed Mosfet】The hot bed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduce heat generation.

🐙【Main Control Chip】: BIGTREETECH Octopus V1.1 motherboard adoptes ARM Cortex-M4 series STM32F446ZET6 32-bit microcontroller at 180MHz with 512Kb flash ROM. Notice: Input voltage only supports 24V, 12V is not allowed.

🐙【CAN BUS】BTT Octopus control board supports CAN Bus connectivity using an ethernet connector. This CAN Bus connection allows to expand control board with other expansion boards very easily.

🐙【6 PWM Fans Plus 2 】The Octopus Mainboard offers up to 6 controllable PWM fans and additional 2 without control with the possibility of voltage selection from 5V, 12V or 24V.The BTT Octopus also has 8 sockets for drivers, making it an ideal electronics for demanding machines.

Support Marlin2.X firmware,32-bit 168MHz MCU STM32F407VGT6

Support TF Card,USB Disk,Virtural USB Device,PWM TTL,Power TVS Protect

3.5 inches Touch screen Support 3 types of UI

☆【48V High Speed Printing】Motor voltage of SKR 3 EZ varies from 12V to 48V (need to use EZ5160 Pro driver for 48V) while SKR 3 varies from DC 12V to 24V. Higher voltage can extremely improve your printing speed and you can adjust it with a jumper cap. What's more, SKR 3 owns 2 normal fans, and the EZ version owns 3 normal fans, which can ensure the smooth operation of your printer and advance your printing quality.

☆【Safe Anti-misplugging Design】Wrong installation of drivers will not only cause damage to the drivers itself but even ruin the motherboard or catch fire. And according to our survey, 40% Users may misplug the drivers unintentionally. Our new arrivals SKR 3 EZ motherboard and EZ series drivers, featuring an unprecedented anti-misplugging design, can totally remove such hidden dangers to offer you a better and safer printing experience! (Traditional TMC drivers is still compatible.)

☆【Updates of Processor】The new processor of SKR 3 EZ controller is upgraded to 32-bit 480MHz ARM Cortex-M7 series STM32H743VI, with which the running speed and printing accuracy of SKR 3 controller is greatly increased by 30%+ while its working noise become lower. Its upgraded thermistor supports PT1000, exempting the need of external module.

🍀【New Upgrade of SKR 2】BIGTREETECH SKR 3 mainboard is the upgrade version of SKR 2. Its processor is upgraded to 32-bit 550MHz ARM Cortex-M7 series STM32H723VGT6.The running speed and printing accuracy of SKR 3 controller is greatly increased by 30%+ while its working noise become lower.

🍀【Robust Power System】SKR 3 controller board is equipped with TPS5450-5A power chip, which supports power input of DC12/24V and output current of 5A (peak output 6A ). With its robust power system, SKR 3 motherboard can firmly will be the perfect supporter for your Raspberry PI.

🍀【DIY Friendly Interfaces】BOOT0 is added for programming firmware in DFU mode. WIFI module (ESP-12S, ESP-07S, ESP32) enables you to easily debug RRF. SKR 3 motherboard also supports bltouch, resume printing function, RGB lights, blocking detection and shutdown after printing function. What’s more, it’s also compatible with TFT35 E3 V3.0/TFT35 V3.0/TFT28 V3.0/12864 LCD display as well as TMC2209, TMC2208, TMC5150, DRV8825 stepper motor drivers.

【🐙Main Control Chip】Octopus pro board adopts the ARM Cortex-M7 series, STM32H723ZET6, main frequency up to 550MHz, Processing is more stable and fast.

【🐙About Firmware】Supports Marlin and Klipper, the best choice for Klipper high-speed printing，meet the individual need of DIY users，support Operation systems Raspberry Pi / Octoprint.

【🐙Stepper motor Upgraded】Support 8 axis powerful motor driver ，support 5V level for stepper motor driver ,better performance. support max 60V motor input voltage to inprove motor power ,reduce pulse losing. Support STEP/DIR/UART/SPI Mode.

TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision.

The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing.

Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market.

All-in-one 3D printer motherboard

A preconfigured firmware is preloaded onto the board.

Stepper Drivers: 5x integrated 1/16th microstep motor drivers