Best 3D Commercial Printers in 2026

【QIDI Third Generation Extruder Assembly】The two newly upgraded extruders of X-PLUSⅡ are dual-gear extruders with more accurate printing, better heat dissipation, and less clogging.The ordinary extruder has already been installed on the printer, and its max printing temperature is 250 ℃. It can work well with PLA, ABS, and TPU. The high-temperature extruder has a 300 ℃ maximum printing temperature, which can print Nylon, PA12-CF, and PC.

【Double Z-axis driver】 Ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.Large print size is 10.6x7.9x7.9 Inch.

【Filament detection function& Resume Printing】X-PLUSⅡis equipped with a filament runout sensor. When printing a large model, there is no need to worry about the filament depletion. It will ring to remind users.If a power outage occurs during the printing process, the printer will automatically save the breakpoint.

【Design Concept】X-CF PRO is a 3d printer specially designed for printing carbon fiber and nylon filaments.Independent research and development of the latest generation single extruder system, which uses high-temperature alloy material, dual-gear extrusion, can solve the problem of the accuracy is not very accurate or service life is not long when printing carbon fiber. Another set of normal high-speed extruder can easily print PLA, ABS, PETG and other filaments.

【Precision Manufacturing Process】QIDI TECH using industrial-grade manufacturing, dual z-axis and industrial guide, can achieve high precision, fast printing. Upgrading the XYZ structure, all use of industrial slides. PEI printing plate, solve printing models warp and other problems.The 3d printer’s structure is developed for the effective and accurate printing of carbon fiber.Meanwile, printing other common filaments, the speed can be increased to 120cc per hour.

【New technology upgrade】 A new automatic intelligent leveling mode, taking points up to 20 points to calculate the travel prime. With the new upgraded software, it is more intelligent, especially provide more effective and accurate parameters for printing carbon fiber and nylon filaments, which can be used right out of the box. The main board is made of main core Cortex-M4 and TMC2208 driver chip, matched with 800*480mm 5 inch HD capacitive display.

【Faster printing】Fully industrial-grade structure, using the second-generation Qidi dual Z-axis structure, all of the original motion structure is upgraded to linear guides, with the high temp extruder, the filament extruding is faster and smoother, the printing accuracy is higher .The printing speed is increased by 20%, it is set to print easily at 100cc per hour.

【Freedom in the choice of the filament】 Qidi iFast can print almost all kinds of filaments which suitable for FDM 3D printers on the market, such as PLA ,PLA+ ,ABS ,PETG, NYLON,etc. The iFast 3d printer equipped with a heated chamber, which can be heated to 60°C. The excellent mechanical structure can produce more robust manufacturing-grade parts.

【Freedom in manufacturing of the complex parts】 Qidi iFast is equipped with automatic dual extruder, which can automatically adjust the left and right extruder up and down according to the software. With the PVA (water-soluble) support, it is very suitable for printing manufacturing-level parts with complex structures and realizing precision manufacturing.

【Upgraded Dual Blower Kit】Equipped with the dual blower kit, the filament can be cooled quickly after extrusion so that the model is not prone to deformation or wire drawing, which will be better for printing.

【90% Pre-assembled with Stable Triangular Structure】The Upgraded Longer LK5 Pro 3d large printer is 90% Pre-assembled with build size of 300*300*400mm. Plus the reinforced design of diagonal rods form a stable triangular structure, which can effectively reduce vibration and achieve more stable printing.

【Silent and Open source Motherboard】Backed by TMC2208 ultra-silent driver, it demonstrates firm properties as well as reduces noise. With open-source firmware, you can try your fantastic ideas on LK5 Pro by changing the G code. BL touch installation is also provided (not included in the package).

【250mm/s High-speed Printing】: The Official Creality Ender 5 s1 3D Printers cut printing time by 75% by refine motion system with a standalone motor at each X/Y/Z axis for up to 2000mm/s² acceleration, and a steel transmission shaft that connects and syncs the Y-axis belts. The 3D Printer alves the printing time and boosts efficiency.

【Clog-free Direct Extrusion at 300℃】: The “Sprite” dual-gear direct extruder of the Ender 3d printer delivers a strong 80N extrusion force. The hotend features a titanium heatbreak blocking heat creep, a corrugated heatsink for rapid cooling, and a 50mm³ large melting chamber to fully melt the filament. It can print PLA, TPU, PETG, ABS, and more, clog-freely for 1,000 hours.

【Stable Frame Underpins Quality】: An all-metal cube frame goes with the classic Cartesian structure. The stability is enhanced by thick linear shafts, extra gussets, two cantilevers, and silicone bed mounts. It ensures a 100% success rate for 1,000h printing at 250mm/s.

【Leveling Free】– Build plate is well leveled in the factory.Removable and Heating bed,much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG filament etc.

【New Quick Detachable Nozzle】– loading more smoothly with new nozzle and more compatible with third-party filaments. Remove the nozzle from extruder just in one push; Stainless steel tube material; Nozzle fast heated to 240°C in 50 seconds.If you need to print high-temperature filaments, you could purchase additional a 0.3, 0.4, 0.6mm 265℃ nozzle.

【Filament detection function】– Printing will be suspended automatically when filament is broken or used up, and printing will be resumed after user replaces the new filament.

【High-precision Integral Light Source】Creality resin 3d printer halot-one with the self-developed integrated light source adopts reflection and refraction, compared with the directional matrix light source, 20% increase in precision and uniformity increased to 80%, greatly improving the gloss and fineness of the model, avoiding uneven curing, overexposure, printing defects and other problems.

【Fast Printing】Creality halot one 3d resin printer is equipped with a 5.96-inch monochrome LCD screen with 2K HD 2560x1620 resolution, only taking 1-4s/layer exposure to cure resin, , which can significantly improve the printing efficiency while maximizing model detail and save you time.

【High-Performance Motherboard】Halot one resin printer is equipped self-developed mainboard of new generation boasts a main control chip equipped with the ARM cortex-A53 and 64-bit quad-core powerful computing and image processing functions ensure smooth operation and consistent printing accuracy and efficiency.

【IDEX 3D Printer with 4 Printing Modes】Creator Pro 2 3D printer is equipped with independent dual direct drive metal extruders that allow you to print two different colors and two different materials. Offers higher productivity and more possibilities.

【Double Productivit 】 Creator Pro 2 equips with Independent dual extruders (IDEX). 2 nozzles work simultaneously and independently to achieve double productivity. Perfect for small workshop's production demands.

【Heating bed】 Rapid steady heating prevent model warping much easier to take down models. Better able to produce high-quality prints with a variety of materials such as PLA, ABS, PETG, TPU, PC, PA, Wood, ASA and PVA.

Cut Printing Time by 70%: Get prints fast with PowerBoost. A powerful stepper motor, double-belt driveshaft, and stabilized motion algorithm work together to push out loads of extra power at 5X speed (compared to standard 50mm/sec print speeds).

Precise 0.1 mm Detail: Achieve precision—even at 5X speed—thanks to the new ultra-direct extruder and integrated die-cast aluminum alloy structure. Never compromise on stable quality even when you're printing at 5X speed. AnkerMake M5 frees yourself from sanding with smoothness in every 0.1 mm thick layer.

Error Detection System: M5 calculates a printing plan and uses extra processing power and an integrated intelligent camera to stick to it—keeping your model matching your design. Save time and filament with real-time notifications that auto-pause prints when errors are detected, including failing to stick to the print bed, spaghetti messes, or extruder jams.

[8.9 inch Large Screen, Fast Printing]: Creality LD-006 3D Resin Printer features an 8.9 inch monochrome 4K HD LCD screen with a resolution of 3840x2400dpi and requires only 1-4/layer exposure to cured resin, which can significantly improve printing efficiency and save you time. In addition, the monochrome LCD screen has a longer lifespan and stable performance during long-term printing.

[Better User Experience]: LD-006 dlp 3D Printer Insert User-friendly 4.3 inch full color touch screen UI design interface can monitor real-time printing information, easy to operate. In addition, Creality 3D Resin Printer has a large build volume of 7.55×4.72×9.84 Inch, which leaves sufficient printing space and freedom for you to make any shapes of 3d models.

[Ultra-Precision Printing]: This resin 3d printer comes with an upgraded version of the smallest. Angled 2° directional matrix light source and upgraded transmission system transmission system, working with 4K mono LCD, greatly improves printing accuracy and detail.

Independent dual extruders make it possible to produce a clean, dual color print and double productivity under duplicate mode

Free FlashForge developed powerful slicing software “FlashPrint” is fully compatible with Creator Pro 2

Full manufacturer's warranty fulfilled by FlashForge