Best Creality in 2026

Compatible with all Creality 3D Printer

Number of Pins: 3

3D Printer Accessories Limit Switch 3Pin N/O N/C control easy to use Micro Switch

👍【Quality Assurance】Creality 100% official, 3M Capricorn premium XS Bowden tube is all original and high quality from 100% quality assurance. Creality selects imported Teflon tubes, which are not only high-quality but also highly adaptable, with a low loss rate, suitable for Ender 3 Series, Ender 5 Series, CR-10 Series.

🆗【Advanced Technology】Capricorn PTFE tube 1.75mm is far better than the white PTFE tube that comes with any 3D printer. It is manufactured according to the highest specification of 1.75mm filament. It has the lowest friction 1.75mm filament on the market and the inner diameter is 1.9mm. It is an ideal oil-free lubricating material. Less friction means faster response, less retraction, and saves more time.

⭕【4 Major Advantages】Creality Capricorn tube is resistant to high temperatures up to 300°C, which is very suitable for printing special filaments such as ABS, nylon, and polycarbonate. High lubrication, corrosion resistance, pressure and wear resistance, aging resistance, radiation resistance, low permeability, long-term exposure, and no deformation in the atmosphere.

100% Creality Original--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.

Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.

Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

Very easy to take off the models, NO tools to remove models

Use clips to fix the glass plate on the hot bed.

Higher temperature higher sticky. The models will stick on bed firmly when temperature is high

【300°High-temp Nozzle】Upgraded brass nozzle can stand up to 300°printing temperature and it is compatible with multiple filaments such as PLA, ABS, PVA, Wood, TPU, PRTG and PA which providing more possibilities for creation.

【Sprite Dual-Gear Direct Drive Extruder】Compatible with more filaments, Ender 3 S1 Pro 3d printer can print PLA, TPU, PETG, ABS.etc. It is more lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU.

【4.3 inch Touch Screen】The 4.3-inch touch screen supporting 9 languages, offers efficient UI interaction and is easy to use. It will dim out automatically for energy-saving if there is no action for 3 minutes.

PC4-M6 Fittings：thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm

PC4-01 Fittings：thread about 1/8, The upper parts can be inserted into 4MM pipe and self locking,the lower screw thread is 1/8 teeth

PC4-01 Fittings:Silver; PC4-M6 Fittings; Gold

【Best Performance】 Creality 3D Printer Bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend.

【Compatible with More Filaments】 PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃.

【Product Parameter】Teflon tube length: 1 Meter, Inner Diameter: 1.95mm ± 0.05mm , Outer Diameter: 2mm. The optimal inner diameter size is designed to reduce "wiggle room" or flex in the tube, allowing you to print flexible filaments even on the longest Bowden systems.

A PREMIUM CREALITY UPGRADED KITS: A Premium Upgrade Kits for Ender 3 / Ender 3 Pro /Ender 5 /CR10 /CR10S /S5 3D printer; These quickly and easily installed collection of tried and tested upgrades improve the performance and reliability for your 3D Printers.

100% GENUINE CAPRICORN XS BOWDEN TUBING---Capricorn Premium XS Bowden Tubing is enhanced with a proprietary blend of high-performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm ± 0.05mm internal diameter.

COMPATIBILITY--- All Metal MK-8 Extruder Feeder Drive 1.75mm Filament, It makes loading the filament easier and smoother, no worries about filament scraping or breaking.

Creality Upgrade Heater Block Silicone Cover Instead of Heat Insulation Cotton

Non-stick silicone material made

Keep the hotend temperature extremely stable.

[Super Durable Tungsten] - MK8 extruder nozzles are made by paramount hardened tungsten steel, with longer lasting time than the normal brass nozzle. The nozzles can work on Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 S1, Ender 3 S1 Plus, Ender 3 S1 Pro and CR 10 Series. The hardness is beyond HRC60, can reduce the abrasion to the inner and outer of the nozzle during long time printing, more heat-resistant and more durable than ordinary brass nozzle.

[Super High Temperature Resistance] - The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible with material such as PLA, ABS to carbon fiber, even PEEK.

[High Precision More Than Your Imagination] - Keep stable temperature during printing, let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision. Avoid clog during printing, easy to clean. Made with centering CNC precision automatic lathe and with one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs.

COMPATIBILITY--- All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about filament scraping or breaking. This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware.

UPGRADE METAL EXTRUDER---The upgrade Creality3D silver metal Bowden extruder is an update for the plastic extruder. Upgrade your Creality 3D Printer Extruder with "Metal Anodised Aluminum". The extruder drive upgrade can resolve the under extrusion problem. The silver extruder even has smoother feeding than the RED metal extruder.Creality Official Upgrade Extruder is the perfect replacement

WORK BETTER--- the extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printers' performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. It performs better than the plastic version included in stock printers. It allows you to print flexibles and regular plastic filaments.

It's 100% Creality Original and Creality-Capricorn PTFE Tubing.

Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.

Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.

Nozzle: 0.4mm

Material: brass

Input Diameter: 1.75mm

Original Aluminum Drive Feed for Creality 3D CR-7, CR-8, CR-10, CR-10 S4, CR-10 S5, it is stable and durable.

MK8 extruder drive feed kit, can replace acrylic parts of CR-10, CR-10 S4, CR-10 S5.

Full Metal Aluminum Alloy

HIGH SPEED PLA: Creality 3D printer filament Pro vacuum sealed with desiccants in a transparent bag.

STRONGER TOUGHNESS: Toughness enhancement,Stable spool less-tangle, Make printing smoother.

SIZE ACCURACY: Filament accuracy is 1.75mm ±0.03 mm, 1 kg (2.2 pounds).strict quality control make a reassuring printing experience.

HIGH SPEED PLA: Creality 3D printer filament Pro vacuum sealed with desiccants in a transparent bag.

STRONGER TOUGHNESS: Toughness enhancement,Stable spool less-tangle, Make printing smoother.

SIZE ACCURACY: Filament accuracy is 1.75mm ±0.03 mm, 1 kg (2.2 pounds).strict quality control make a reassuring printing experience.

【High-precision Integral Light Source】Creality Halot-Lite Resin 3D Printer self-developed integrated light source adopts reflection and refraction, so that the light intensity distribution of the entire screen is uniform, and the uniformity of the light source energy can reach more than 80%. When the individual lamp beads are attenuat-ed, the uniformity of the printed model is not affected.

【4K Monochrome LCD & Fast Printing】Creality resin printer is equipped with a 8.9-inch monochrome LCD screen with 4K HD 3840*2400 resolution, only needs 1-4/layer contact curing resin, which can significantly improve the printing efficiency while maximizing model detail and save you time.

【Larger Build Volume】Creality Resin 3D Printer has a large printing size of 192*120*200mm/7.55x4.72x7.87 inch, which leaves sufficient printing space and freedom for you to make any shapes of 3d models. The transparent cover enables you to monitor the printing process while maintaining a 99.95% UV blocking rate, making it safe and convenient for beginners and kids.

HIGH SPEED PLA: Creality 3D printer filament Pro vacuum sealed with desiccants in a transparent bag.

STRONGER TOUGHNESS: Toughness enhancement,Stable spool less-tangle, Make printing smoother.

SIZE ACCURACY: Filament accuracy is 1.75mm ±0.03 mm, 1 kg (2.2 pounds).strict quality control make a reassuring printing experience.

✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term use!

✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture between pneumatic joint and Teflon tube. What's more, you can adjust the gear pressure of extruder in time by adjusting bolts.

✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly making the red extruder retain powerful in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.

Ender 3 Rubber belt

belt for ender-3 X axis Y axis

timing belts

[High-temp Passion, Good with Multiple Filaments]: For creality ender 3 s1 pro 3d printers, the most attracting thing is its good performance under high-temp conditions. The nozzle made of brass can stand up to 300 degrees celsius printing. It is compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, creating numerous possibilities for the imagination. There is no need to change the nozzle even printing with different filaments, which is time-saving with enhanced efficiency.

[“Sprite”, Small but Powerful]: Creality 3d printers uses the self-developed “Sprite” full Metal Dual-gear Direct Extruder. Same as its name, “Sprite”, it is small but powerful - weighing only 334g, but the extrusion force can be up to 80N. It enables smooth feeding when printing with diverse filaments, including those flexible materials, providing users with a stable and reliable printing journey.

[Hassle-free Leveling]: This creality 3d printer equipped with CR Touch, the automatic leveling ensures perfect leveling by measuring the distance between the nozzle and the heat bed and accurately completes compensation. Therefore, Ender-3 S1 Pro is friendly, especially for 3D printing beginners.

【Dual-Gear Direct Drive Extruder】The upgraded dual-gear direct extruder features two chromesteel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extrudeirealizes smooth feeding and discharging of filaments without slipping and works extremely well irprinting flexible filaments such as TPU. Compatible with more filaments, Ender 3 S1 Pro 3d printecan print PLA,ABS, PETG, Wood TPU PA etc.

【4.3 inch Touchscreen & LED Light】 The 4.3-inch touchcreen, Supporting 9 lanquages, offers offcient Ul interaction and is easy to use lt will dim out automaticaly for energy-saving if there no action for 3 minutes. Designed with LED lights enables you to check the printing status at any time.

【Removable PEl Spring Steel Print Sheet】The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PEl coating brings good adhesion and printed models can easily be removed by bending the print sheet.

【Larger Printing Size】Ender 3 S1 Plus 3d printer has a larger print size of 11.8*11.8*11.8inch compared to Ender 3 S1 and Ender 3 S1 Pro, which can print both large models and small parts, or print several small models at the same time on a large build surface, to achieve better printing results and larger print models.

【CR Touch Auto Bed Leveling】Creality Ender 3 S1 Plus 3d printers with CR-Touch 16-points automatic bed leveling, which can complete quickly adjust the the nozzle printing height on the hot bed, making the bed leveling more precise and saving the trouble of manual leveling.

【High-Precision Dual Z-Axis】Creality 3d printer has the dual Z-axis lead screws and dual motors design, this 3D printer works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality.

Highly Integrated with Strong Computing Power: Beneath the large 7-inch Creality sonic pad touch control screen, the Klipper firmware runs in full swing on a powerful 64-bit computing platform. With software-hardware integration, you will get stunning performance.

Higher Printing Speed and Keep the Quality: Creality sonic pad uses precision-oriented algorithms to command the motors for higher printing speed. The built-in input shaper fanction will mitigate oscillation during high-speed printing and smooth out ringing, thus keeping the model quality.

Higher Compatibility: Sonic pad based on klipper firmware can connect to almost any creality FDM 3D printer on the market via a USB cable. By updating the system, it has been pre-configured for Ender-3 Pro,Ender-3 V2,Ender-3 V2 Neo,Ender-3 Max,Ender-3 S1,Ender-3 S1 Pro,Ender-3 S1 Plus,Ender-5 S1,Ender-5 Pro,Ender-5 Plus Ender 6 3D Printers, so you can get it going in seconds. The rest of compatible Creality 3d printers will catch up soon.

【250mm/s High-speed Printing】: The Official Creality Ender 5 s1 3D Printers cut printing time by 75% by refine motion system with a standalone motor at each X/Y/Z axis for up to 2000mm/s² acceleration, and a steel transmission shaft that connects and syncs the Y-axis belts. The 3D Printer alves the printing time and boosts efficiency.

【Clog-free Direct Extrusion at 300℃】: The “Sprite” dual-gear direct extruder of the Ender 3d printer delivers a strong 80N extrusion force. The hotend features a titanium heatbreak blocking heat creep, a corrugated heatsink for rapid cooling, and a 50mm³ large melting chamber to fully melt the filament. It can print PLA, TPU, PETG, ABS, and more, clog-freely for 1,000 hours.

【Stable Frame Underpins Quality】: An all-metal cube frame goes with the classic Cartesian structure. The stability is enhanced by thick linear shafts, extra gussets, two cantilevers, and silicone bed mounts. It ensures a 100% success rate for 1,000h printing at 250mm/s.

【CR Touch Auto Bed Leveling】Ender 3 Neo 3D printer is equipped with CR Touch sensor, which can automatically identify the height between nozzle and platform, 16-point ranging and intelligent compensation make the leveling bed easier and more accurate.

【Silent Mainboard】The Ender 3 Neo with 32-bit silent mainboard which has stronger anti-interference, faster and more stable performance. Ensure that the operation of the machine is below 50db without affecting study and work.

【Smooth Feeding】This ender 3D printers uses an all metal extruder for greater extrusion force and smoother synergy; it is more durable and guarantees smooth infeed and outfeed, reducing the risk of nozzle blockage.

【CR Touch Automatic Leveling】Creality Ender 3 Max Neo 3D printers is equipped with CR Touch sensor, which can improves the efficiency by automatically measuring and adjusting the 25-point print height on the heat bed, making leveling much easier.

【Larger Build Volume】Ender 3 Max Neo 3D Printers Compared to ender 3, ender 3 v2 neo, ender 3 neo can print larger size. Ender 3 Max Neo build volume of 300*300*320 mm allows the printing of both large models and small parts, or several small models on a large build surface at the same time, greatly increasing efficiency and offering more creative possibilities.

【High-precision Dual Z-Axis】Perfect coordination among dual Z-axes, timing belt and dual motors guarantees the stability and higher printing precision. Effectively avoid printing deviation in single-axis printing and reduces the possibility of lines and bulges on your side print.

【High-precision Integral Light Source】Creality resin 3d printer halot-one with the self-developed integrated light source adopts reflection and refraction, compared with the directional matrix light source, 20% increase in precision and uniformity increased to 80%, greatly improving the gloss and fineness of the model, avoiding uneven curing, overexposure, printing defects and other problems.

【Fast Printing】Creality halot one 3d resin printer is equipped with a 5.96-inch monochrome LCD screen with 2K HD 2560x1620 resolution, only taking 1-4s/layer exposure to cure resin, , which can significantly improve the printing efficiency while maximizing model detail and save you time.

【High-Performance Motherboard】Halot one resin printer is equipped self-developed mainboard of new generation boasts a main control chip equipped with the ARM cortex-A53 and 64-bit quad-core powerful computing and image processing functions ensure smooth operation and consistent printing accuracy and efficiency.

ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design

EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands

CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.

100% Creality Original

X axis 765x6mm Y axis 720x6mm Belt for Ender 3

Material: Rubber