Best Creality Cr 10 3D Printing Filament in 2026

【Clog-Free & Bubble-Free】-- Designed and manufactured with clog-free patent to guarantee a smooth and stable printing experience with these PLA refills. Complete drying for 24 hours before packaging and vacuum sealed with desiccants in a transparent bag

【Less-tangle and Easy to Use】Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother

【Dimensional Accuracy & Consistency】advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, Accuracy +/- 0.03 mm; 1 kg spool (2.2lbs)

100% Original Capricorn XS Series tubing.

Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate.

PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and durable. PC4-M10 Couplers: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10.

Genuine Upgrades: Creality Capricorn XS Series Bowden PTFE tubing is the lowest friction premium tubing on the market with faster response, less retraction, and more accurate prints. There is less slippage, wear and tear on the extruder and less clogging when printing chunky filaments such as some wood fillers or iron fillers.

Compatible with More Filaments: This Bowden tube is reinforced with a proprietary blend of high-performance additives that can withstand higher temperatures than any other tubes, making it ideal for printing specialty filaments such as ABS, nylon, and polycarbonate. This PTFE tube XS tubing can keep working at temperatures up to 260°C.

Smoother Filament Output: Designed for 1.75mm filament, Creality Capricorn tubing has extremely accurate inner & outer diameters, and filament loads smoothly into the hotend with as little room for error as possible between the extruder and the hotend.

👍【Quality Assurance】Creality 100% official, 3M Capricorn premium XS Bowden tube is all original and high quality from 100% quality assurance. Creality selects imported Teflon tubes, which are not only high-quality but also highly adaptable, with a low loss rate, suitable for Ender 3 Series, Ender 5 Series, CR-10 Series.

🆗【Advanced Technology】Capricorn PTFE tube 1.75mm is far better than the white PTFE tube that comes with any 3D printer. It is manufactured according to the highest specification of 1.75mm filament. It has the lowest friction 1.75mm filament on the market and the inner diameter is 1.9mm. It is an ideal oil-free lubricating material. Less friction means faster response, less retraction, and saves more time.

⭕【4 Major Advantages】Creality Capricorn tube is resistant to high temperatures up to 300°C, which is very suitable for printing special filaments such as ABS, nylon, and polycarbonate. High lubrication, corrosion resistance, pressure and wear resistance, aging resistance, radiation resistance, low permeability, long-term exposure, and no deformation in the atmosphere.

【Clog-Free & Bubble-Free】Designed and manufactured with clog-free patent to guarantee a smooth and stable printing experience with these PLA refills. Complete drying for 24 hours before packaging and vacuum sealed with desiccants in PC bag

【Less-tangle and Easy to Use】Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother

【Dimensional Accuracy & Consistency】Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, dimensional accuracy + / - .02 mm; 1 kg spool (2.2lbs)

High-quality PLA filament: The recommended nozzle temperature is about 210-220°C. With quality and consistency in mind, stronger toughness with low shrinkage and better layer adhesion. Meet your needs for functional print projects. (Using tips: Please pass one end of the filament into the fixing hole to avoid being entangled after finishing your printing.)

Dimensional Accuracy & Consistency: PLA filament. Self-adaptive control system in the manufacturing guarantee the 1.75 mm diameter, dimensional tolerance: +/- 0.02mm, 1 kg spool (2.2lbs) net weight.

Clog-Free & No Bubble: PLA is vacuum sealed with desiccant to protect the filament from moisture to achieve high-precision printing.No clogging and bubble-free.

【Best Performance】 Creality 3D Printer Bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend.

【Compatible with More Filaments】 PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃.

【Product Parameter】Teflon tube length: 1 Meter, Inner Diameter: 1.95mm ± 0.05mm , Outer Diameter: 2mm. The optimal inner diameter size is designed to reduce "wiggle room" or flex in the tube, allowing you to print flexible filaments even on the longest Bowden systems.

✅【High bed and layer adhesion, Smooth surface, Great details, Easy to sand】Compared to traditional brittle PLA Black filament, PLA 2 (PLA 2nd generation) Black 3D filaments were enhanced to have better performance. PLA2 Black filaments are softer and more flexible. 3D Printing professionals and cosplay makers love PLA2 Black 3D printing filament because great printed details can save significant sanding and primer time. Prints can be sanded like ABS.

✅【Over-extrusion or under-extrusion prevented through Diameter Accuracy and Consistency control】Advanced real-time laser diameter monitor and self-adaptive control system in the manufacturing make sure PLA2 Black 3D printing filament to have a diameter tolerance of ±0.03 mm. The consistent diameter tolerance allows 3D printers to extrude exact amounts of melted PLA Black filament to flow through the extruder nozzle.

✅【Vacuum Packing and Tangle-free】All FilaCube 3D Black filament spools are vaccum sealed with a desiccant packet to protect plastic filament from moisture. Dry Black 3D filaments help make bubble-free and stringing-free prints. All Black filament spools are wound by winding machines, which prevents tangles.

HIGH SPEED PLA: Creality 3D printer filament Pro vacuum sealed with desiccants in a transparent bag.

STRONGER TOUGHNESS: Toughness enhancement,Stable spool less-tangle, Make printing smoother.

SIZE ACCURACY: Filament accuracy is 1.75mm ±0.03 mm, 1 kg (2.2 pounds).strict quality control make a reassuring printing experience.

HIGH SPEED PLA: Creality 3D printer filament Pro vacuum sealed with desiccants in a transparent bag.

STRONGER TOUGHNESS: Toughness enhancement,Stable spool less-tangle, Make printing smoother.

SIZE ACCURACY: Filament accuracy is 1.75mm ±0.03 mm, 1 kg (2.2 pounds).strict quality control make a reassuring printing experience.

【Good printing effect, 100% Bubble-Free】- New upgraded Universe series 3D printing filament PLA-Meta strictly guarantees neat lineup, no knotting, strictly guarantees ±0.02mm wire diameter difference, 100% zero bubbles. Ensure high efficiency printing, say goodbye to plugging.

【Good fluidity, Strong resistance】- SUNLU 3D filament PLA-Meta is 1.5 times more fluid than ordinary PLA, About 1 times stronger than ordinary PLA and PLA+ in terms of impact resistance. The smoothness of the material discharge is excellent, reducing plugging, and the printed models are resistant to dropping.

【Lower printing temperature, lower consumption】 - PLA meta filament melting point is 155℃-170℃, Recommended printing temperature is 180℃-200℃, lower than PLA 3D printing filament. Lower melting point and printing temperature, means more energy saving, reduce printer loss and extend the life of 3D printer. It can also greatly reduce clogging, drawing, and ensure stable feeding and stable printing.

【Who doesn't cherish his reputation】As a well-known brand in 3D printing, Creality is committed to creating excellent printing experience for customers. We are committed to providing a more cost-effective and good quality PLA Filament to all people who love 3D printing.

【Made of Corn Starch Materials】Non-toxic, No irritating smell. Suitable for use in schools, homes, and offices. Whether for entertainment or work, Ender PLA 3D printing filament can give you a better experience.

【Tangle Less,Clog-free, Bubble-Free】Creality Ender PLA 3D Printer Filament 1.75mm, PLA 1.75 Dimensional Accuracy +/- 0.02mm. Full Mechanical Winding and Strict Manual Examination, Which Guarantee the Ender PLA filaments tidy and easy to be fed.

【Toughness Upgraded Ender PLA Plus】Creality Ender 1.75mm pla filament has Quality Assured, No Second-Hand Material Added, Satisfy Ordinary Printing Needs. Make sure there is no clog and adhesion issue.

【New Cardboard Spool】This 3D printing filament has upgraded to Recycled Cardboard Spool. With Instant Measure Board .Delivering good Design and good Quality.

【Ultra Accuracy & Consistency】100% Diameter Accuracy +/- 0.03 mm. Manufactured by Creality self-owned factory certificated with BSCI and ISO. Sold Over 10 thousand Tons of filament A year. owns 420+ Patented Technology in FDM 3D print.

HIGH SPEED PLA: Creality 3D printer filament Pro vacuum sealed with desiccants in a transparent bag.

STRONGER TOUGHNESS: Toughness enhancement,Stable spool less-tangle, Make printing smoother.

SIZE ACCURACY: Filament accuracy is 1.75mm ±0.03 mm, 1 kg (2.2 pounds).strict quality control make a reassuring printing experience.

✨【PLA+ Filament Advantages】--- PLA+ 3D Printer Filament is improved and upgraded based on PLA filament,good adhesion performance ,high strength and better toughness.Clog/Bubble/Tangle/Warping/Stringing free, high durability, better layer adhesion.iBOSS filaments are made with virgin materials, no pollution, non-toxic and no odor during the printing.

📏【Dimensional Accuracy & Consistency】--- iBOSS 3D Printer PLA Plus filament of 1.75mm diameter, Minimum tolerance and low warping to ensure consistent feeding and stable prints.Dimensional accuracy + / - 0.02 mm ; 1 kg spool (2.2lbs), which making filament that have an outstanding surface finish and are highly precise.

🧵【Tangle Free & Bubble-Free & Clog-Free】--- Our 3D Printing Filaments are easy-to-use.Total Length: 340-350m.Recommended Print Temperature:210-230℃.Melt well, feed smoothly and constantly without clogging the nozzle or extruder.Full mechanical winding and strict manual examination,to make sure the line tidy and no-tangle.

✔️New double gear extrusion mechanism, high extrusion force, ensuring smooth feeding.

✔️Upgrade: Better pressure pushes the filament into the printer nozzle, works with Creality 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/ Tornado, etc.

✔️All-metal aluminum alloy, High-quality dual gear extrusion, stable and durable.

Compatible：The filament spool holder is compatible with Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5, CR-6 SE, CR-10 Smart and more 3D printers.

Rotatable Spool Holder: The spool holder rotate 90° in single track. Making the filament better fits on your table.

Easy Installation with Gripper: The hollow part with integrated casting and snap-in type gripper ensures the spool holder durable and sturdy.

【Packing List】1Set Filament Holder(2 Parts)

【Adjustable Width】All size of filament spool can be used on our filament holder, just adjust the distance.

【Application】Suitable for 3D printing filament spools.

100% Original Capricorn XS Series tubing.

Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate.

PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and durable. PC4-M10 Couplers: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10.

【100% Original Teflon Tube】Capricorn premium XS bowden genuine teflon tube is specially developed for 1.75mm filament, with extremely precise inner diameter. There are uniform tube shape, inner diameter and perfect round shape, which ensures smooth filament-pushing. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon.

【Advanced Material】Capricorn bowden PTFE tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃.

【Gas-tight Seal Pneumatic Fitting】PC4-M6 & PC4-M8 pneumatic fittings are also included for replacement use on any stock creality hotends. High quality pneumatic joint, elasticity clamp springs,resistance plug, press ellipticrelease ring and pull out easily.

🔰【Widely Compatible】Original MK-ST 0.4mm 3D printer Nozzles of Creality CR-6 SE/Ender-3 S1/Ender-3 S1 Pro/Ender-3 S1 Plus/Sermoon V1 Pro/Ender-2 Pro/CR-6 Max/CR-10 Smart. And it can compatible with most Creality 3D printers on the market such as Ender-3 series and CR-10 series.

🔰【Quality Assurance】Creality 100% official, 5 MK-ST extruder nozzles are made of high-quality national standard brass, centering CNC precision automatic lathe and one-step molding technology, with precise tooth shape and no burr, to ensure that the input and output holes have a high degree of concentricity and better preventing print head leakage.

🔰【Perfect and Durable】The brass nozzle has better thermal conductivity. It is recommended to print at standard temperature. Filaments like PLA, and TPU are ideal choices. It not only reduces the resistance, avoids the clogging of the filament on the rounded chamfer, but also has a long service life and makes the filament smoother.

100% GENUINE CAPRICORN XS BOWDEN TUBING---Capricorn Premium XS Bowden Tubing is enhanced with a proprietary blend of high-performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm ± 0.05mm internal diameter. Reduces the "wiggle room" or buckling, inside the tube, allowing you to print flexible filaments

LESS FRICTION---High Lubricity Additives makes Capricorn XS Series tubing has the lowest friction than another ordinary Bowden tube. More responsiveness, less retraction, more accurate prints, less slippage, wear and tear on the extruder, and less clogging when printing chunky filaments

HIGHER TEMPERATURE RESISTANCE--- High-Temperature Resistance due to using only the highest quality PTFE. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. it stands the highest standards for PTFE tubing in all of the 3D printing.

Compaliablity: 8.66*8.26*11.02inch, compatible with500g, 1kg, 3kg, 5kg filament and suitable for all printers.

High Stability: The overall frame of the 3d printer filament bracket is composed of sheet metal and is integrally cast to ensure the long-term durability and stability of the filament holder.

Exquisite Craftsmanship: The feeding seat is rotated by the bearing to avoid flaming paper jams and entanglement, which makes feeding more smooth.

High Performance: It has the advantages of both PLA and ABS filaments. Eco-friendly, odorless, and non-toxic. No cracking and warping. With good toughness, the printed model is firm and sturdy

Transparent and Glossy: The finished product has a fine surface with exquisite details. With good toughness, the printed model is firm and sturdy. The filament can bend repeatedly with high elongation at break

Non-toxic Material: CR-PETG 3D Filament has excellent wether resistance and chemical resistance, no odor, and non-toxic, which is friendly to the environment

Matte Surface: matte finishes for a premium printing experience, the printed surface diffuses light to give it a matte finish reducing the visibility of printed layer lines.

Easy Support Removal: designed to support itself and break away easily, saving you time and hassle during support removal. No worries about damaging the model's body, and keeping perfect details.

Eco-friendly Cardboard Spool: fully recyclable PLA raw material and cardboard packaging reduce spool handling costs and plastic waste.

Upgraded teflon tube. It's specially developed for 1.75mm filament, the inner diameter is extremely precise and uniform, ensuring smooth filament flow.

Advanced Material: Preciser transmissionof hot-melt filament. Heat resistant, anti-carbonize.

Internal visualization. Translucent design makes your process more visible.

【Mechanical Properties】-- Tensile strength (X-Y): 31.9 ± 1.1 (MPa), Elongation at break (X-Y): 6.8 ± 0.9 (%), Bending modulus: 1174 ± 64 (MPa), Bending strength: 53.7 ± 2.4 (MPa), Charpy impact strength: 5.1 ± 0.3 (kJ/m2).

【Clog-free & Bubble-Free】-- Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience. Complete drying for 24 hours before vacuum aluminum foil packaging, which can effectively protect the PETG filament from moisture. As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result

【Less- tangle and Easy to Use】-- Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed; Larger spool inner diameter design makes feeding smoother

【Foaming Process】AIR PLA is a low-density foamed PLA, the foaming process allows the filament to have a lower density than ordinary PLA, making the print quality lighter (compared to about 80% of the weight of ordinary PLA)

【Density stable】The pre-foaming process is adopted, and the foaming is completed during the wire making process. Compared with the filament of Foaming When Printing, it has higher printing density stability and is better at suppressing stringing

【Application】AIR PLA has the potential to print lightweight parts because of its low density. It can be used to print models such as drones and RC-planes, or for the manufacture of cosplay props