Best Monoprice 3D Printing Filament in 2026

【Clog-Free & Bubble-Free】-- Designed and manufactured with clog-free patent to guarantee a smooth and stable printing experience with these PLA refills. Complete drying for 24 hours before packaging and vacuum sealed with desiccants in a transparent bag

【Less-tangle and Easy to Use】Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother

【Dimensional Accuracy & Consistency】advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, Accuracy +/- 0.03 mm; 1 kg spool (2.2lbs)

① 【Super Neat Filament Spool】SUNLU 3D printer filament product line is equipped with an excellent self-developed neat winding device, 100% neat rate, no clogs, making filament easier to use.

②【SUNLU PLA 3D Printer Filament】PLA filament is the most basic, the most used filament, no clogs, no bubbles, no tangle, SUNLU PLA filament has good layer adhesion, very easy to use.

③【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers.

【Up-to 5 Times Speed TPU Filaments】--- Our upgraded TPU Flexible Filament is thermoplastic polyurethane (TPU) based filament but can print 5 times fast as ordinary TPU filaments. It has a shore hardness of 95A and can stretch 3 times more than its original length. Excellent bed adhesion, low-warp and low-odor, make these flexible 3D filaments of of high Elasticity easy to print.

【Clog-Free, Bubble-Free & Easy-to-use】--- Designed and Manufactured with Clog-Free patent to guarantee a smoother and more stable printing experience with Overture TPU Rolls. Complete drying for 24 hours before packaging and vacuum sealed with desiccants in a transparent bag, no bubble and easy to print. Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking.

【Dimensional Accuracy & Consistency】--- Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these soft TPU filaments to be strict tolerances, diameter 1.75mm, dimensional Accuracy 99% Probability +/- 0.05 mm without any exaggeration; 1 kg spool (2.2lbs).

Filament Diameter: 1.75 mm; Shore Hardness: 95A; Dimensional Accuracy +/- 0.05 mm; 0.8 kg (approximately 1.76 lbs) per Spool; Vacuumed Sealed with Desiccant; Recommended extruder temperature:195 - 230°C; Recommended platform temperature: 40 - 60°C

SainSmart TPU filament is renowned for its high quality and ease of use, offering you a flexible and strong parts with consistency and smooth finish.

Compatibility: It is compatible with most FDM printers on the market that use 1.75 mm filament, including SainSmart x Creality, Prusa i3, Monoprice MakerSelect & Qidi, and other RepRap printers.

【𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲 & 𝐂𝐨𝐧𝐬𝐢𝐬𝐭𝐞𝐧𝐜𝐲】 Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance ±0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all

【𝐍𝐞𝐚𝐭 𝐒𝐩𝐨𝐨𝐥 & 𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐐𝐮𝐚𝐥𝐢𝐭𝐲】 The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely

【𝐂𝐥𝐨𝐠-𝐅𝐫𝐞𝐞 & 𝐁𝐮𝐛𝐛𝐥𝐞-𝐅𝐫𝐞𝐞】 Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother

✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE with excellent adhesion.

✅【Best Quality PETG Filament】Made by USA virgin PETG material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use. Ensure Diameter 1.75mm + / - 0.02 mm.

✅【Tangle-Free Tips】1kg Yellow PETG Filament dried 24 hours before packaging and vacuum sealed with desiccants in nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use.

Most Basic Popular Type Rainbow Silk PLA: This Multi Colored Silk PLA is Color Change Quite Fast, Around Each 5-10 Meters Change Color Random Gradually, which Much Faster Compare Others Rainbow PLA in Market; It's Include Mainly 5 Colors: Silk Yellow, Silk Orange, Silk Red, Silk Purple, Silk Peackcok Blue; This Unique Shining Luster Multi Colors, To Support You to Print Shiny Multi Beautiful Different Amazing Colors in One Spool Filament, It's Very Suitable for Printing Beautiful Objects as Gift

High Quality and Strong Compatibility: 1.75mm Diameter, Silk Like Feel Silky Shinny Surface with Silk Luster, Giving Smooth, Pearly and Unique Touch, Easy to Print; Perfectly Compatible with Most of the FDM 3D Printers and 3D Pens in Market, Such as Creality Ender, ANYCUBIC, Flashforge, Monoprice, SCRIB3D, MYNT3D, Melt Well and Feed Smoothly, No bubble, No Jamming, No Warping, Easy to Print

100% Tangle-Free Tips and Printing Setting: All of Our Filament are 100% Tangle-Free before Package Opened, Pls Kindly Fix Filament End after Each Time Printing, Pls Make Sure to Insert Free End of Filament into Spool Holes, to Avoid Being Tangled for Next Time Use; To Improve Printing Quality, Pls Use New 0.4mm+ 3D Printer Nozzle, Pls Kindly Print Silk PLA with Higher Temperature and Lower Speed Compare to Normal PLA

🔮 【Matte Finish】 - PolyTerra PLA is a 3D printing filament featuring an incredible matte surface finish that helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: muted blue PLA filament 1.75mm ( PLA muted blue Filament )

🧵 【Tangle Free & Moisture Free】 - PolyTerra PLA is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use

🛠️ 【Advanced Properties】 - PolyTerra 1.75 PLA filament features good ductility, making it less brittle than usual PLA

PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant

Recommended Nozzle Temperature: 205 - 225 C; Filament diameter - 1.75mm +/- 0.03mm

Net weight: 200 grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25"

①【High Speed Printing PLA META Filament】SUNLU 1.75mm PLA Meta 3D printer filament(Tolerance Level : ± 0.02mm)smooth squeeze. PLA Meta filament is 1.5 times more fluid than regular PLA. Minimum tolerance and low warping to ensure consistent feeding and fast prints, say goodbye to clogging. SUNLU perfect dimensional accuracy +/-0.02mm provide optimum flow through the extruder nozzle.

②【PLA META Filament Recommend Settings】High toughness and non-brittle PLA Meta filament printed parts can be sanded, drilled and painted. SUNLU PLA Meta filament is very tough and not easily brittle, the model does not break easily when dropped from a height to the ground. PLA Meta filament Print nozzle temperature 185-195℃, Hot bed temp: 50°C-65°C, Print speed: 50-100mm/s, low printing temperature printing for greater energy efficiency.

③【Glossy Surface & Good Adhesion】Brightly coloured PLA Meta 3d printer filaments bring glossy surface prints to arts, crafts and 3D projects. SUNLU PLA Meta filament 1.75mm has the advantages of high purity with good adhesion and superb layer bonding.

Material TPU is a polymer material between rubber and plastic. It has excellent high tension, high tensile strength, toughness and aging resistance. It is a mature environmental protection material. TPU consumables are added on the basis of raw materials. It is made of toner and other additives. The material is environmentally friendly.

Technical Specification Print Temperature:190 - 220, Diameter:1.75mm (Tolerance:+/-0.05mm). Shore hardness 95A, Net weight 0.5kg(1.1lbs), We recommend hardened steel nozzle 0.5mm.

Less-tangle & Wide Compatibility Full mechanical winding and strict manual examination, which guarantee the TPU filaments tidy and easy to be fed. Works perfectly with most FDM 3d printers on the market, such as Ender 3, Monoprice, Prusa, MK3, Creality, etc.

【Easy going for new starters】-- Upgraded formula make the print is more easier and less print action needed. With consistency and pure quality,Easy PLA can be used on various mainsteam printers,give you less inconvenience and less hassle.It's easy for new starters to print with basic settings.

【Less-tangle and Precision Winding】Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother

【Dimensional Accuracy & Consistency】advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, Accuracy +/- 0.03 mm; 1 kg spool (2.2lbs)

✅【High bed and layer adhesion, Smooth surface, Great details, Easy to sand】Compared to traditional brittle PLA Black filament, PLA 2 (PLA 2nd generation) Black 3D filaments were enhanced to have better performance. PLA2 Black filaments are softer and more flexible. 3D Printing professionals and cosplay makers love PLA2 Black 3D printing filament because great printed details can save significant sanding and primer time. Prints can be sanded like ABS.

✅【Over-extrusion or under-extrusion prevented through Diameter Accuracy and Consistency control】Advanced real-time laser diameter monitor and self-adaptive control system in the manufacturing make sure PLA2 Black 3D printing filament to have a diameter tolerance of ±0.03 mm. The consistent diameter tolerance allows 3D printers to extrude exact amounts of melted PLA Black filament to flow through the extruder nozzle.

✅【Vacuum Packing and Tangle-free】All FilaCube 3D Black filament spools are vaccum sealed with a desiccant packet to protect plastic filament from moisture. Dry Black 3D filaments help make bubble-free and stringing-free prints. All Black filament spools are wound by winding machines, which prevents tangles.

【Cool Rock-like PLA with Rock/Marble Rough Surface】--This newly launched filaments feature not just matte rock visualization, but also rock feel. Designed for aesthetic creation of statue themed prints, which can exhibit sharp details. Not suitable for functional scenario which needs very strong physical properties

【Easy to Print & More Humanized Design】-- Easy to print just like normal PLA, more likely to get quality prints. Excellent threshold overhang angle. Printing a raft is always recommended. Raft and support are very easy to remove. Reel with length/ weight gauge and viewing hole so that you can easily figure out the remaining filaments; more filaments clip holes for fixing purpose on the reel; Larger spool inner diameter design makes feeding smoother

【Odorless & No Bubble】-- Developed based on Natural PLA, this marble PLA filaments deliver excellent printing quality with no odor and low warpage during printing; Complete drying for 24 hours before vacuum packaging to effectively protect the filament from moisture, no stringing and bubble-free.

♥[Premium ST-PLA Filaments] CCTREE ST-PLA (PLA Plus version): is a Upgrade Non brittle PLA with real good strength and impact resistance,High rigidity and Good Glossiness, It has the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness.

♥[Dimensional Accuracy & Consistency] -- CCTREE ST-PLA filaments made of Premium PLA Raw Material, advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these ST-PLA filaments of 1.75 mm diameter, dimensional accuracy + / - .03 mm; 1 kg spool (2.2lbs).You will have Pretty good experience during Printing with useing CCTREE Filaments

♥[Less-tangle & Wide Compatibility]-- Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking;CCTREE filament Perfect Compatible with all common 1.75mm FDM 3D printers,such as Creality Ender 3 ,Ender 3 V2,ANYCUBIC Mega S,Monoprice and other desktop 3D printers

✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE with excellent adhesion.

✅【Best Quality PLA Filament】Made by USA virgin PLA material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use. Ensure Diameter 1.75mm + / - 0.03 mm.

✅【Tangle-Free Tips】1KG grey PLA Filament dried 24 hours before packaging and vacuum sealed with nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use.

[Odorless &Zero Warping]-- This CoPA filament combines excellent strength, toughness, and heat resistance of up to 180˚C. It delivers excellent printing quality with no Order or warpage during printing. Complete drying for 24 hours before vacuum aluminum foil packaging, which can effectively protect the Nylon filament from moisture. As the Nylon material is sensitive to moisture, please remember to put it back into a transparent bag.

[High Stability and Durability]-- Our OVERTURE Nylon Roll is based on a copolymer of Nylon 6 and Nylon 6.6, a strong and tough thermoplastic polymer. Great for creating parts which needs to be strong and durable. These Nylon filaments are excellent choice for engineering production or prototyping. PVA glue is always required for better adhesion

[More Humanized Design & Easy to Use] -- Grid layout on the surface for easy resizing; with length/ weight gauge and viewing hole on the reel so that you can easily figure out the remaining filaments; more filaments clip holes for fixing purpose on the reel; Larger spool inner diameter design makes feeding smoother

[Less Odor, Less Warping & Bubble-Free]--This ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor and low warpage during printing. Complete drying for 24 hours before vacuum packaging. Enclosed chamber is required for better printing quality and durability when printing big parts with ABS filaments

[High Stability and Durability]-- OVERTURE ABS Roll are made by commonly used ABS, a strong and tough thermoplastic polymer—great for creating parts which needs to be resistant to high temperatures; Due to the high stability and various post-processing options (sanding, painting, gluing, filling), our ABS filaments are excellent choice for engineering production or prototyping

[More Humanized Design & Easy to Use] -- Grid layout on the surface for easy resizing; with length/ weight gauge and viewing hole on the reel so that you can easily figure out the remaining filaments; more filaments clip holes for fixing purpose on the reel; Larger spool inner diameter design makes feeding smoother

【Good printing effect, 100% Bubble-Free】- New upgraded Universe series 3D printing filament PLA-Meta strictly guarantees neat lineup, no knotting, strictly guarantees ±0.02mm wire diameter difference, 100% zero bubbles. Ensure high efficiency printing, say goodbye to plugging.

【Good fluidity, Strong resistance】- SUNLU 3D filament PLA-Meta is 1.5 times more fluid than ordinary PLA, About 1 times stronger than ordinary PLA and PLA+ in terms of impact resistance. The smoothness of the material discharge is excellent, reducing plugging, and the printed models are resistant to dropping.

【Lower printing temperature, lower consumption】 - PLA meta filament melting point is 155℃-170℃, Recommended printing temperature is 180℃-200℃, lower than PLA 3D printing filament. Lower melting point and printing temperature, means more energy saving, reduce printer loss and extend the life of 3D printer. It can also greatly reduce clogging, drawing, and ensure stable feeding and stable printing.

Great Silk Luster Surface PLA Filament: It's Silk Like Feel Silky Shinny Surface with Silk Luster, Giving Smooth, Pearly and Unique Touch; Without Polishing, You will Get a Gorgeous Printing Surface, It's Perfectly for 3D Printing Field, Such as DIY, Industry, Education, etc

High Quality Control: All of Our Silk PLA is Made by 100% Eco-Friendly New Raw Material, and Low Odor, No Bubble, Melt Well, Feed Smoothly, No Jamming, No Warping, Easy to Print, Provide Excellent Surface Finished of Printed Parts;

Strong Compatibility: 1.75mm High Diameter Tolerance, To Ensure Consistent Feeding and Smooth Printing, It's Perfectly Compatible with Most of the FDM 3D Printers and 3D Pens in Market, Such as Creality Ender, ANYCUBIC, Flashforge, Monoprice, SCRIB3D, MYNT3D, etc

PETG filament combines the advantage of PLA and ABS filaments, which are odorless, flexible, durable and highly impact resistant. Enhanced adhesion, less warping and stable filament diameter guarantees print quality.

No jamming, no bubbles and neatly winding making Firos PETG filament provides you with a great printing experience. This 1.75mm 3d printer filament compatible with most common 3D printers, such as Creality Ender 3 , Ender 3 Pro, Prusa, Makerbot, ANYCUBIC, Monoprice Mini Delta, SCRIB3D, MYNT3D, Flashforge, etc.

3D printer filament with 1.75 mm diameter + / - 0.03 mm; Recommended Nozzle Temperature 210 - 230°C (410 - 446°F). Heat Bed 65-85°C (149 - 185°F).Spool Diameter: 7.87" - Spool Width: 2.72" - Spool Hub Hole Diameter: 2.13".

[Shinning Silk PLA] -- This OVERTURE Newly-released PLA with nice and glossy color brings your prints a rich and "metallic" finish, which is quite suitable for printing docorations or structurers with luxurious fee

[Clog-Free & Bubble-Free]-- Designed and Manufactured with Jam-Free patent to guarantee a smooth and stable printing experience with these PLA refills. Complete drying for 24 hours before packaging and vacuum sealed with desiccants in a transparent bag

[Less -tangle and Easy to Use] -- Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother

【Up-to 5 Times Speed】- The Amolen TPU Flexible Filament can print 5 times fast as ordinary TPU filaments, it's made from high-quality thermoplastic polyurethane (TPU) that allows for repeated movement or impact without cracking. Plus, it's resistant to oil, grease, and abrasion.

【Smooth and Clog-Free Printing】- AMOLEN TPU filament 1.75 is designed to print smoothly and without clogs.Ensuring good shaping, strong toughness, no bubbles, no jams, and no warping. It melts well and feeds smoothly and constantly without clogging the nozzle or extruder.

【Versatile Applications】- The TPU filament can be used to create a wide range of items, including FPV drone parts, Playstation covers/skins, mobile phone cases, holders, toy soles, watch straps, and more. Let your imagination run wild!

🌳AMAZING PRINT EFFECT - The PLA filament is color change dual colors - black, green, and a little yellow as a transition color. You would get a complete discoloration when you print a 120g object. The reason why this 3D printer filament looks beautiful is full of shiny galaxy flecks on the silk PLA filament surface.

🌳EASY TO PRINT - The diameter tolerance of this 1.75 PLA filament is +/- 0.02mm. More stable diameter tolerance of 3D printer filament would give you smoother 3D printing. High toughness PLA filament cause you have room for 3D printing imagination.

🌳UPGRADE PLA RAW MATERIAL - The raw material comes from Europe, and it has been developed and modulated to show a charming sparkle on the PLA. No jamming, no bubble, no tangle, and no layer line, just silk and shiny color changing PLA filament.

PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution.

This 1.0kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm.

It has a nominal processing temperature range of 205 ~ 225°C (401 ~ 437°F).

✅No Clogging & No Bubbles & Easy to Use: The use of non-clogging patented design and manufacturing ensures that the use of our PLA refills provides a smooth and stable printing experience, so that the printed parts have an excellent surface finish.

✅Dimensional Accuracy & Consistency: Advanced CCD diameter measurement and adaptive control system in manufacturing ensure that these tough PLA filaments have strict tolerances. The diameter of the filament is 1.75mm, and the dimensional accuracy is +/- 0.03mm, which makes the filament flow out more smoothly and the output is even. Low shrinkage and stable printing size make the interlayer fusion very good and obtain better bridging effect.

✅Strong Toughness & Less Tangles: BIQU PLA 1.75mm filament is a high-performance PLA material with strong toughness.100% no tangles. Fully mechanical automatic winding, stable fixing holes, strict manual inspection, to ensure neat lines, less tangles, and avoid breaking and breaking. The larger inner diameter of the spool is designed to easily leave the spool without any cross turning, and the feeding is smoother, meeting your needs for free printing.

2 Silk Color Gradient Change PLA Filament: It's 2 Color Change from Silk Black to Silk Green, Which Color Change is Gradiently, will Make Multi Silk Shiny Colors Mixed in One Spool Filament; Also this Filament Type with Silk Like Feel Silky Shinny Surface; Giving Smooth, Pearly and Unique Touch; You will Get a Gorgeous Mutli Colored Printing Surface, It's Perfectly for 3D Printing Field, Such as DIY, Industry, Education, etc

High Quality and Strong Compatibility: 1.75mm Diameter, High Quality Controlled, We Use the Premium Quality Raw Material to Keep High Qulity Filament; It's Low Odor, No Bubble, Melt Well, Feed Smoothly, No Jamming, No Warping, Easy to Print

Strong Compatibility: 1.75mm High Diameter Tolerance, To Ensure Consistent Feeding and Smooth Printing, It's Perfectly Compatible with Most of the FDM 3D Printers and 3D Pens in Market, Such as Creality Ender, ANYCUBIC, Flashforge, Monoprice, SCRIB3D, MYNT3D, etc

👉🏻【Parameter】Recommended Printing Temp/Nozzle Temperature: 205-230°C (401-446°F), Base Plate Temperature: 40-60°C(104-140°F). Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.20". Weight: 1 KG (approximately 2.20 lbs) Spool.

👉🏻【High Quality, Environment Friendly】RANKI rosewood PLA filament has wood powder in it,so the wood odor will give off when printing. Prints just like normal PLA with gorgeous surface of wood color and texture.superb layer bonding, and strength and toughness are greater than conventional PLA filament. Environmentally friendly and easy to use.

👉🏻【Wide Compatibility】1.75mm Diameter, High Diameter Tolerance, Universal Compatible with Diverse FDM 3D Printers in Market, (For example MK3, Ender 3, BCN3D,Monoprice ,CR 10, Mega, Chiron,Ultimaker, FlashForge , etc.) Melt well and Feed Smoothly, Easy to Print.

【Katkuca PLA 3D Printer Filament】Katkuca PLA filament is the most basic, the most used filament. Designed Clog-Free to guarantee a smooth and stable printing experience with our PLA refills, no bubbles, no tangle, PLA filament has good layer adhesion, very easy to use. Translucent, like frosted frosted glass texture.

【Dimensional Accuracy & Consistency】3D printing filament Plus 10%- 1,1 kg (approximately 2.42 lbs) Spool, 1.75 mm Filament Diameter (Dimensional Accuracy ± 0.02 mm). Katkuca filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing.

【Less-tangle and Easy to Use】Katkuca 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance ±0.02mm, which making filament outflow smoother, came out homogeneous, no clogs, making filament easier to use. Without a single jam and adhesion issue which meeting your demands for printing freely.

【10X Printing Speed】Thanks to the high fluidity and fast cooling formula, Hyper Series PLA supports up to 600mm/s print speed. High fluidity provides sufficient melting and extrusion, while rapid cooling provides fast shaping for high-speed printing.

【Higher Toughness】With higher tensile strength than ABS and higher toughness than traditional PLA, Hyper Series PLA brings better structural bearing capacity to the printed models.

【Environmentally friendly】Hyper PLA Filament selects high-quality raw materials to provide excellent printing performance and printing effect. The packaging uses paper trays and environmentally friendly boxes, reducing carbon emissions.