Best Comgrow in 2026

Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.

Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.

Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.

Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.

Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.

Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.

Constant Temperature: Keep a constant temperature printing environment, reducing the bad impact to printed models when low-temperature weather, improving printing stability.

Fit for Ender 3/Ender 3 Pro/Ender 3S / Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo /Ender 3 Max/CR-6 SE/CR 20/CR 20 Pro.

Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well.

Wire Length: 45.27-46.85inch /1.15-1.19m. Package includes 5 thermistors.

Note: Not fit for Ender 3 V2/Ender 3 MAX/Ender-3 Max Neo/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3d printer's thermistor and confirm whether this thermistor is compatible with yours before buying.

Used for heated bed or hot end.

The UV LED lamp uses 6 high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured efficiently, using less time than usual. NOTE: It can't be used to cure liquid resin directly and can't cure filament prints.

The 360° rotating solar turntable use power from UV lighting /nature solar Power/fluorescent lighting, can't use batteries for power.Maximum display /rotate weighing less than 500g/1.1Pound which is also suggested size that the light can cure. TIPS: Close to light will help to speed up and rotate heavier.

The resin can be cured in 10-15 seconds from a distance of 5 cm from the light. NOTICE: thicker parts require more time to cure. What's more the dimension of the UV light is 3.35*4.53*3.74" and the turntable diameter is 3.5".

The PLA filaments has 1.75 mm diameter with tolerance of ±0.02 mm conform to a standard tolerance. 1 Kg (2.2 lbs) net weight. Compatible with any 3D printer that use 1.75mm diameter filament. (Tips: After printing, please pass one end of the wire into the fixing hole to avoid the filament being entangled due to the loosening of the wire coil.)

Comgrow white PLA is easy to print with. Comes neatly packaged in vacuum-sealed bags with desiccant packets to avoid moisture. The spools are very neatly wound, assuring clog, bubble & tangle-free prints.

We recommend printing the PLA filament at nozzle temperature of 180 - 215°C. All of the Ender 3 series can easily reach the melting range of PLA.

The PLA filaments has 1.75 mm diameter with tolerance of ±0.02 mm conform to a standard tolerance. 1 Kg (2.2 lbs) net weight. Compatible with any 3D printer that use 1.75mm diameter filament. (Tips: After printing, please pass one end of the wire into the fixing hole to avoid the filament being entangled due to the loosening of the wire coil.)

Comgrow black PLA is easy to print with. Comes neatly packaged in vacuum-sealed bags with desiccant packets to avoid moisture. The spools are very neatly wound, assuring clog, bubble & tangle-free prints.

We recommend printing the PLA filament at nozzle temperature of 180 - 215°C. All of the Ender 3 series can easily reach the melting range of PLA.

NO EDGE CURLING - Ender 3 pro glass bed with the composite coating. The models will stick on the bed firmly without glue, avoiding the issue of the print's edges curling. Equipped with 4 clips to fix the hotbed.

LONG DURABILITY - Inorganic coating, high hardness of 8 Mohs, avoiding the deformation of the ordinary aluminum heat bed after long-term use.Undiminished performance after repeated use, no need for frequent replacement.

EXTRA GLASS CLIPS - Use clips to fix the glass plate on the hot bed

The filaments has 1.75 mm diameter with tolerance of ±0.02 mm conform to a standard tolerance. 1 Kg (2.2 lbs) net weight. Compatible with any 3D printer that use 1.75mm diameter filament. (Tips: After printing, please pass one end of the wire into the fixing hole to avoid the filament being entangled due to the loosening of the wire coil.)

Comgrow Grey PLA is easy to print with. Comes neatly packaged in vacuum-sealed bags with desiccant packets to avoid moisture. The spools are very neatly wound, assuring clog, bubble & tangle-free prints.

We recommend printing the PLA filament at nozzle temperature of 180 - 215°C. All of the Ender 3 series can easily reach the melting range of PLA.

High-quality PLA filament: The recommended nozzle temperature is about 210-220°C. With quality and consistency in mind, stronger toughness with low shrinkage and better layer adhesion. Meet your needs for functional print projects. (Using tips: Please pass one end of the filament into the fixing hole to avoid being entangled after finishing your printing.)

Dimensional Accuracy & Consistency: PLA filament. Self-adaptive control system in the manufacturing guarantee the 1.75 mm diameter, dimensional tolerance: +/- 0.02mm, 1 kg spool (2.2lbs) net weight.

Clog-Free & No Bubble: PLA is vacuum sealed with desiccant to protect the filament from moisture to achieve high-precision printing.No clogging and bubble-free.

WELL MADE PEI SHEET- Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Our PEI bed is flexible, removable, and pei sheet can stick to magnetics very well. High strength and heat resistance.

ALL NEW FUNCTIONALITY - The flexible surface of the ender 3 Pro PEI bed can easily be cut to any dimension making it perfect for all build sizes and all FDM printer models.No more tape, no more glue, no more shovel, and release your printing anxiety.

EASY MODEL REMOVAL-The PEI spring steel 235x235 is easy to adhere to the printing surface, easy to remove the prints and flex slightly to pop your print right off.

V4.2.2 UPDATED SILENT MOTHERBOARD: Creality Ender 3 V2 3D printer update the motherboard with silent TMC2208 stepper drivers: Compared to the Ender 3 and Ender 3 pro, a V2 design that delivers users out-of-the-box experience and silence-oriented upgrades,It has been built to offer a beefy level of power, featuring an ARM Cortex-M3 STM32F103 CPU and a TMC2208 stepper drivers

NEW UI & 4.3 INCH COLOR SCREEN: The ender-3 v2 use new display equipped with UI LCD screen, user experience greatly upgrades with the newly designed operation UI system, convenient disassembly and simple operation.

UL CERTIFIED MEANWELL POWER SUPPLY: Creality 3D printer equipped with well-known brand MeanWell power supply to heat up quickly and let users choose between power voltage of 115V or 230V, Meanwhile the ender 3 v2 has been shielded by its power supply from voltage spikes and power outages. If there is a electrical power failure or outage suddenly , printers can resume printing from the last layer, saving time and reducing waste.

REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.

SAFE POWER SUPPLY: Ender 3 Pro comes with a branded power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.

RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.

Self-developed Silent Motherboard: The Ender-3 V2 built-in self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.

UL Certified MeanWell Power Supply: Equipped with MeanWell power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing. Moreover, the power supply is concealed in the machine, making it much safer.

Effortless Filament Feed-in: Ender-3 V2 adds a rotary knob on the extruder, making loading and feeding filament process much easier; Brand new operation UI system and 4.3" smart color screen greatly improve user experience.

ATTENTION BEFORE USE：Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.

ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.

EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.

Upgraded Acrylic Clear Plate Easel stands are suitable to hold and display plates, saucers, photos,books, etc.

The stands have Extra Anti-slip Silicone Dots and are foldable which can stand firmer ,hold heavy things, and are easy to storage.

Comes in 8 Pieces 6.3" Stands - Fit 7"-9" diameter/height item(please choose the right stand size for your items for a stable support), 8 pieces is a great pack that can display a set of plates and other items.

Premium Quality - 25 PCs high-quality brass nozzles, good abrasion resistance, heat resistance, and corrosion resistance.It is convenient for you to replace them in time to achieve high-quality printing.

Package List - The 3D printer extruder nozzles come with 0.4 mm brass nozzles*25, nozzle cleaning needles*10, hexagon wrench*1, stainless steel tweezers*1, and a storage box.

Strong Practicability - Storage box for easy carrying and storage of small accessories.The nozzle cleaning needle is made of high-quality stainless steel with good toughness and is not easy to break, and the nozzle can be cleaned from multiple angles.The hexagon wrench makes the adjustment of the nozzle easier.

Official Guarantee: 100% Creality official stepper motor, our 42-40 stepper motor compatibility with Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/5 pro/5 plus/Ender 3 max/CR-10/CR-10s/CR-10 V2/CR-10V3 3D Printer.

Parameter: 1.8-degree step angle, 0.4 N.M holding torque, with 1A rated current per phase. (The connecting cable is not included.)

High-Quality Stepping Motor: With low power, stable speed and performance, low noise, and no step loss during operation, which ensures the stable operation of the extrusion mechanism.

1.Easy Assembly: Compared to Ender-3 V2, this Ender-3 V2 Neo printer is pre-installed, and the assembly requires only 3 steps. Friendly enough to users and beginners in assembly process, which will save much time. It is convenient for customers to install it in quick way, more efficient.

2.CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you in the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the hot bed. It saves much more time for customers in long-time leveling adjustment, quickly finish the leveling process.

3.Brand New 4.3 Inch UI User Interface: The upgraded UI adds a model preview function, making it easier to observe the printing shape and progress for customers. Which is convenient for you to know about the model status. Also, it supports nine languages for different customers demand.

Upgraded Silent Mainboard V4.2.2: Ender 5 Pro 3d printer comes with upgraded V4.2.2 silent Mainboard with TMC2208 drivers, allowing for quieter and more precise printing performance.

Metal Extruder Kit: Ender 5 Pro adopts Creality metal extruder which has better stronger pressure to pushing filament into printer nozzle, improving the printer's performance.

Capricorn Premium XS Bowden Tubing: Imported Capricorn blue tube with high temperature resistant makes feeding smoother and ensure great printing texture.

[Clean Surface and Smooth Edge] Comgrow air-assist accessories can reduce the surface temperature of objects quickly and effectively during engraving and cutting, the edge will be much more clean and clear by heat dissipation.

[Wide Compatibility Air Pump] Comgrow air assist is equipped with two air assist nozzles and two air tube connectors, which do not need to be purchased separately and can be used with other brands of laser heads, such as XTOO*D1/D1 Pro;

[Air Assist Pump with Large Airflow] Comgrow air assist equipped with adjustable airflow from 0 to 25L/min, which can effectively suppress the smoke and dust generated during engraving and cutting to help engraver cut faster and deeper. (Not the greater the air volume, the better the effect, the air volume will be too large to help combustion, according to the actual situation)

Easy to take off the model, no tools needed. The borosilicate glass bed could be fixed with middle sized clips.

Creality glass bed provides stronger adhesion when removing models.

This borosilicate glass bed could be fixed with middle sized clips.

Size: 235mm x 235mm.

Build sheet adheres to the hot bed to help the filament stuck during printing, while also helping remove the printed model afterward.

Compatible with ABS, PLA, HIPS, and another filament. Works with all FDM printer models.

Dual-Gear Direct Drive Extruder: Compatible with more filaments, Ender 3 S1 3d printer can print PLA, TPU, PETG, ABS.etc. It is more lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU.

CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the heatbed.

Removable Spring Steel Print Sheet: Different from ender3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC spring steel platform. The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PC coating brings good adhesion and printed models can easily be removed by bending the print sheet.

【Powerful Laser Technology】: Comgrow Z1 laser cutter and engraving machine, with 10W diode laser module, 0.08 mm laser spot gives a precise cutting and engraving. Powerful laser units are available for cutting or etching plywood, some cloth and etching aluminum, stainless steel.

【DUAL Y-AXIS MOTOR】: The Y-axis of acrylic engraving machine is extremely smooth and extremely mobile. Not only provides almost unbelievable speed when engraving but also increases the stability and accuracy of the project.

【Extensive software adaptability & Multiple connection methods】：Z1 laser engraver can be compatible with various mature engraving software, LightBurn for experirenced laser user and LaserGRBL for new laser user. LaserGRBL Support Win 7 / Win 8/ Win 10/Win XP,LightBurn supports window /Mac /Linux system.And you can transfer data via Wi-Fi, USB cable, and SD card and use Z1 laser cutter and engraver machine anytime and anywhere.

EASY REMOVAL OF PRINTS: Upgrade part, simply prints on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands. The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible.

DURABILITY: The bed surface is capable to work at 70℃.

CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.

Upgraded 300℃ High-temp Nozzle: This creality 3d printer comes with upgraded brass nozzle which can stand 300℃ high-temp, allow you to choose more kinds of filament like ABS, PETG, PA, PLA, TPU and Wood. Not only for more possibilities of creation but also gives you a smoother printing.

"Sprite" All Metal Direct Drive Extruder: The new upgraded direct extruder comes with the pushing force up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments like TPU.

CR-Touch Auto-level Sensor: CRTouch can complete quickly adjust the the nozzle printing height on the hot bed. CR-Touch gets the 16-points auto-leveling program, which can collect more samples than the 9-points of the BLTouch which makes the bed leveling more precise.

Meanwell Power Supply: The powerful 350W power supply can be adjusted to adapt the voltage from 100V to 240V. Safe to use, and powerful in heating up.

Silent Mainboard: Ender 3 Max adopt the German import TMC2208 chip driver. It is effective to reduce the motor noise and shake that brings a comfortable and silent work environment for you.

Carborundum Glass Platform: With its superiority in heat resistance and surface flatness, the Carborundum glass platform helps prints adhere better and users remove prints easier. No wrapping and no scratches.

1.CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you in the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the hot bed. It saves much more time for customers in long-time leveling adjustment, quickly finish the leveling process.

2.Silent Mainboard: Low-decibel operation ensured by a silent mainboard, will not bothering study or work. Which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation, create a quiet environment.

3.Smooth Feeding: Full-metal extruder with greater force enables smooth feeding, reducing the risk of nozzle blockage. Quick Heat Dissipation: Corrugated heat sink enlarges the radiating area, enabling fast cooling down.

Auto Bed Leveling Pre-Installed - You just plug them in and start printing! It can precisely measure the tilt of the Bed surface, offers the automatic compensation for Z-axis for unevenness of the platform plate, easy to solve the printing failure caused by the unevenness of the platform and provid reliable operation with all build surfaces.

Ultra Large Printing Format - Meet more of your printing requirement. Your idea should not be confined. Achieve better print results and a larger print model at a time. Cube FrameBox design with overhead gantry.A plus size and upgraded version of Ender-5 printer.

Solid Cube Frame - Dual Y-axis synchronization and equipped with a 42-48 motor. Strong power support and smoother transmission lexible and reliable. Dual Z-Axis Lead screw drive smoothly and steady.Movement of the build plate will be more stable.