Best Fl Auto in 2026

Used for removing and installing oxygen sensors in many vehicles that are 7/8" / 22mm in size

1 3/8” Drive 7/8”x80mm (L) Vacuum Switch Socket - 2 3/8” & 1/2" drive, 30 & 50mm (L), ‘Crows Foot’ type Oxygen Sensor Sockets - Comes in a molded case

Constructed of high performance (CR-V & CR-MO) vanadium and chrome molybdenum solid cast steel for strength and durability - Finished with Black Oxide to prevent rust

【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.

【USE】 Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!

【Package】1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads

DESIGN: This socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached. The 6-point beveled nose of this 7/8-Inch (22mm) socket fits oxygen sensors on a wide variety of vehicles. This 3/8-inch drive oxygen sensor socket is also offset and compact which allows for extra leverage even in hard to reach spots. For added leverage, you can use it with your 3/8-inch breaker bar or ratchet.

QUALITY: Made from premium Chrome Molybdenum steel, the oxygen sensor socket allows users to exert maximum torque while the precision casting ensures accurate fit and function. This tool meets and exceeds ANSI/ASME standards. ARES offers a full line of Oxygen Sensor tools including our complete 70318 Oxygen Sensor Socket set that features thread chasers, oxygen sensor sockets and more!

WHY YOU NEED IT: Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. The sensors live in the harshest of environments and may require some elbow grease to remove, but this oxygen sensor socket can save your knuckles and save you time!

Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines

3 types of universal socket wrenchs cover various situations of oxygen sensor location

6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar

DESIGN: This socket's slotted design allows you to maintain oxygen sensors with the wiring harness still attached. The 6-point design of this 7/8-Inch (22mm) socket fits oxygen sensors on a wide variety of vehicles. This 1/2-inch drive oxygen sensor socket can be used with your 1/2-inch breaker bar or ratchet for added leverage.

QUALITY: Made from premium Chrome Vanadium steel, this oxygen sensor socket allows users to exert maximum torque while the precision casting ensures accurate fit and function. This tool meets and exceeds ANSI/ASME standards. ARES offers a full line of Oxygen Sensor tools including our complete 70318 Oxygen Sensor Socket set.

WHY YOU NEED IT: Even if you don't have a lot of experience working with cars, you can maintain your O2 sensor with this oxygen sensor socket. The sensors live in the harshest of environments and may require some elbow grease to service, but this quality tool can save your knuckles and save you time!

【Package】Includes 2 7/8" 3/8 Inch Drive Vacuum Switch Sockets and One 7/8" x 1/2" drive Oxygen Sensor Socket

【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.

【Material】 Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.

【High Qulity】Made of high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust and corrosion.

【Size】 7mm slot, 7/8” (22mm) x 6-point x 3-1/10” (80mm) length, 3/8 inch square drive for use with ratchet. Fits all standard oxygen sensors with a 7/8” hexagon nut.

【Design】Standard 6 point with low profile and 8mm x 64mm side cutout design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.

Usage: This tool sets are used to remove. Inspect, replace and install oxygen sensors and vacuum switches on vehicles and engines.

Package: There are 5pcs sockets and wrenches included in the red case, 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads

Material: These sockets and wrenches are forged with high quality steel and gain a high strength which give them a better performance.

SPECIALTY TOOL MAKES EASY WORK: Slotted designed for removing and installing 7/8 inch 22mm oxygen sensors in hard to reach locations without removing or damaging wiring harness

BUILT TOUGH: Impact-rated Chromoly steel; precision casting for accurate fit and long tool life

WORKS IN TIGHT SPACES: Wrench offset design for added working depth; works with 3/8 inch drive tool or breaker bar for improved leverage

INCLUDES: This set includes a 29mm 1/2-inch drive Vacuum Switch Socket, 27mm 1/2-inch drive Injector Socket, 27mm 3/8-inch drive Oil Sender Unit 1-inch Socket, 22mm 3/8-inch drive Vacuum Switch Socket, 22mm 1/2-inch drive Heated O2 Sensor Socket, 27mm 3/8-inch drive Oil Sender Unit 1-1/16-inch Socket, 22mm 3/8-inch drive 6-Pt Offset O2 Sensor Wrench, M12 x 1.25mm and M18 x 1.5mm O2 Sensor Rethread Tools, and a 22mm 1/2-inch Drive Deep Offset O2 Sensor Socket."

QUALITY: All tools in this 10-piece Oxygen Sensor Socket Set are constructed of high strength Chrome Vanadium Steel with a Manganese Phosphate coating to resist corrosion."

STORAGE: This Oxygen Sensor Socket set comes complete with convenient storage case so you'll never misplace a socket on the job again!

QUALITY - Constructed from drop forged heat-treated chrome-vanadium steel (CR-V) for strength and longevity; Black phosphate finish for corrosion resistance.

SIZE - Fits standard oxygen sensors with a 7/8” hexagon nut; 7mm slot, 7/8” (22mm) x 6-point x 3-1/10” (80mm) length, 3/8 inch square drive for use with ratchet.

DISIGN FEATURES- The size of the open side is 8 mm, the length: 80mm, Side cutout prevents damage to wires

Ideal for removing and installing oxygen sensors and vacuum switches on vehicles with computer-controlled engines

3 Different types of sockets cover various situations of oxygen sensor locations

Universal 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar

Application: This socket set is designed for the removal inspection or replacement of heated and non-heated oxygen sensors fitted to the following vehicle Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda. These sockets feature cut-away sections allow some sockets to fit over wiring harnesses, complete with the black phosphate finish for a durable design.

3/8’’ Drive × 7/8’’ ×1/2’’ Oxygen Sensor Socket/Vacuum Switch Socket removes and installs vacuum switch with a 7/8’’ hex and some oxygen sensors; 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance.

1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models; 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles; 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’.

【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.

【Package】1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads

【USE】 Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!

Used for removing and installing oxygen sensors in many vehicles that are 7/8inches / 22mm in size

2pcs CR-MO Steel 6 Point Sockets

1pcs CR-V Steel 6 Point Socket

Oxygen Sensor Socket Wrench Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads

Oxygen Sensor Socket Wrench Set Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires，Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.

5 Pcs Oxygen Sensor Switch Socket Wrench Kit and Thread Chaser Set-3 types of universal socket wrenchs cover various situations of oxygen sensor location,6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.

[SIZE]: 3 piece 3/8 & 1/2" drive O2 oxygen sensor wrench socket tool set; universal 7/8"/22mm professional grade removal tool for cars & automotive

[ITEM INCLUDES]: 1 vacuum switch socket & 2 puller sockets kit

[MATERIAL]: Constructed of high performance (cr-v & cr-mo) vanadium and chrome molybdenum solid cast steel for strength and durability - finished with black oxide to prevent rust

【Package】Includes 2 7/8" 3/8 Inch Drive Vacuum Switch Sockets and One 7/8" x 1/2" drive Oxygen Sensor Socket

【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.

【Material】 Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.

Function: The Apeixoto oxygen sensor removers will help your in adjusting and removing oxygen sensors, oil pressure sending unit vacuum swithces and fuel injections. These tools can be used most vehicles.

Packages: There are 10 pieces removers and sockets in the red case. The whole tool set comes in a solid red case which will protect the tools well during shpping and let you keep the tools well after usage.

Specifications: The specification for these 10 oxygen sensor sockets are : 1/2 inch dr x 22mm x 6PT x 110mm, 1/2 inch dr x 29mm x 6PT x 90mm, 1/2 inch dr x 22mm x 12PT x 78mm, 1/2 inch dr x 27mm x 12PT x 78mm, 1/2 inch dr x 28mm x 12PT x 78mm, 1/2 inch dr x 7/8 inch x 50mm, 3/8 inch dr x 7/8 inch x 6PT x 80mm, 3/8 inch dr x 7/8 inch x 6PT x 90mm, 3/8 inch dr x 7/8 inch x 30mm, and 3/8 inch dr x 1 inch and 1-1/6 inch x 74mm

Offset Design: Wire drive gate allows sensor access from the side, not the top, preventing damage to wires; Install or pull sensor without detaching the wiring harness

Import and Domestic: Standard 6 point, 22 millimeter socket fits a broad range of car oxygen systems; 3/8 and 1/2 inch drive crowfoots make this a nearly universal O2 removal tool set

Professional Grade Sensor Set: This specialty tool kit allows you to remove and install oxygen sensors and hex vacuum switches on most vehicles with computer-controlled engines

Fitment: Compatible with Aston Martin DB7; Compatible with Ford Crown Victoria Mustang Taurus Escape GT Thunderbird F-150 F-250 F-350 F-450 F-550 Focus E-150 E-250 E-350 Expedition F53 Explorer Econoline Club Wagon Windstar; Compatible with Jaguar S-Type; Compatible with Lincoln Town Car LS Aviator Navigator Blackwood Continental; Compatible with Mazda B4000; Compatible with Mercury Grand Marquis Montego Sable Marauder Mountaineer Cougar

Interchange Part Number: 15717, 234-4071, 234-4046, SG1814, ES20104, 250-24001

Product Package Includes--4 x Oxygen Sensor(4 sensors are the same);

10Pcs Sensor Oil Pressure Sending Unit Socket Set Oxygen Injection Tool Set Remove Oxygen

Sensors, Injectors, Oil Pressure Sending Units And Vacuum Switches. Heat-treated Chrome

Vanadium And Chrome Molybdenum Steel With Black Oxide Finish Accepts Either 3/8 Or 1/2""

REMOVE OXYGEN SENSORS FROM YOUR VEHICLE: This 10 Piece Specialty Sockets O2 Sensor Tool Set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches; Some O2 socket pieces feature cutout sides to prevent damage to wires and tubes; Remove and install parts on most domestic and some international vehicles

USE WITH YOUR TOOLS: Features 3/8-inch or 1/2-inch square drive to fit your O2 sensor wrench drives; For use with ratchet, breaker bar, or hand wrench (driver tools not included); Not compatible with impact tools; Use this tool in conjunction with the O2 Sensor Thread Chasers to install new sensors easily (thread chaser and sensors not included)

BUILT TO LAST: Constructed of heat-treated chrome vanadium steel, this oxygen sensor remover set is built for strength, durability, and longevity; Each 02 sensor socket is coated with a black oxide finish to provide resistance to rust and corrosion

【Size】 7/8 inch (22 millimeter) hex fits almost all oxygen sensors. 3/8 inch square drive for use with ratchet.

【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.

【Material】 Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.

✅ UNIVERSAL APPLICATION: Shankly's oxygen sensor socket set is appropriate for oxygen sensors on the majority of modern vehicles. It is designed to remove oxygen sensors while the wiring harness is still attached and compact to give you more leverage even in tight spaces

✅ PROFESSIONALLY-MADE: Designed with solid cast steel construction and high-performance chrome molybdenum for strength and durability, assisting the mechanic in doing the task swiftly and effectively. To prevent corrosion, this tool was finished with black oxide

✅ HEATED AND NON-HEATED SENSORS: The heated and non-heated oxygen sensors on the majority of automobiles can be removed, inspected, or replaced with Shankly's o2 sensor sockets. This spark plug thread chaser set has two thread chasers that clean and mend damaged threads

【Size】 7/8 inch (22 millimeter) hex fits almost all oxygen sensors. 3/8 inch square drive for use with ratchet.

【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.

【Material】 Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.

Used for removing and installing oxygen sensors in many vehicles that are 7/8" / 22mm in size

1 3/8” Drive 7/8”x80mm (L) Vacuum Switch Socket - 2 3/8” & 1/2" drive, 30 & 50mm (L), ‘Crows Foot’ type Oxygen Sensor Sockets - Comes in a molded case

Constructed of high performance (CR-V & CR-MO) vanadium and chrome molybdenum solid cast steel for strength and durability - Finished with Black Oxide to prevent rust

21Pcs Sensor Oil Pressure Sending Unit Socket Set Oxygen Injection Tool Set Remove Oxygen

Most comprehensive kit available. Features extended and reinforced socket body removes the most stubborn sensors without rounding them off

Automotive 6pt and 12pt sensor sockets set for installing and removing oxygen sensors, injectors and thermal switches

Premium Quality: This automotive oxygen sensor socket set is made of premium material with delicate workmanship, heat treated chrome vanadium & chrome molybdenum steel with black oxide finish for corrosion resistance. They are sturdy in structure and will not easily crack under high pressure to achieve maximum strength and service life.

Excellent Design: The pressure vacuum switch socket kit adopts a 6-point high torque design, which touches and grasps the firmer flat side of the nut or bolt head, rather than the weaker corner. Slotted design allows removing oxygen sensor with wiring harness attached and prevents damage to wires. Each socket is permanently etched with size marking for your convenience.

Diversified functions: This oil pressure sending unit master socket is ideal for the removal and installation of oxygen sensors, oil pressure sending units, oil pressure switches, vacuum switches equipped with wires or vacuum tubes and thermal sensor switches. Humanized design, indenter design, non-slip, wear-resistant, and careful makes it ideal for home, construction and auto shops.

Suitable for oxygen sensors found on most modern vehicles

Cut-out and slots enable sockets to be fitted over wiring harness

Includes 2 chasers for cleaning and repairing damaged threads