Best Flsun in 2026

【400mm/s High Speed Printing & 8000+ mm/s² Acceleration & Pre-installed Klipper Firmware Pad;】 Equipped 3 x 48W High Power stepper motor and Pre-installed Klipper Firmware Pad support a normal printing speed of Flsun V400 3D Printer up to 400mm/s and 8000+ mm/s² acceleration, enjoy instant high speed printing while maintaining the same molding precision quality, 400% faster than industry standard, enable you save more than 70% of printing time.

【Φ300mmX410mm Large Printing Size;】 Large printing volume Φ11.8"（Diameter）x 16"(H) / Φ300mm（Diameter）X410mm.

【High-Speed Integrated Dual-Axis Linear Guide;】 High-precision Dual-Axis linear rail guide, providing higher printing accuracy and stability, and lower noise.

<b>200mm/s High Speed Printing & 2800+ mm/s² acceleration & Three Axis Linkage Technology; Equipped 3 x 48W High Power stepper motor and Three axis linkage technology support a normal printing speed of Flsun Super Racer （SR） 3D printer up to 200mm/s and 2800+ mm/s² acceleration, enjoy instant high speed printing while maintaining the same molding precision quality, 200% faster than industry standard, enable you save more than half of printing time.

<b>Φ260X330mm Large Printing Size; Large printing volume Φ10.2"（Diameter）x 13"(H) / 260 x 260 x 330mm.

<b>Linear Rail Guide; High-precision linear rail guide, providing higher printing accuracy and stability, and lower noise.

FLSUN SR Super Racer 3D Printer Fast 200mm/s 2800 mm/s ² FDM 3D Printer + One Set of PEI Board Official Hot Bed Upgrade Kit

200mm/s High Speed Printing & 2800+ mm/s² acceleration & Three Axis Linkage Technology; Equipped 3 x 48W High Power stepper motor and Three axis linkage technology support a normal printing speed of Flsun Super Racer （SR） 3D printer up to 200mm/s and 2800+ mm/s² acceleration, enjoy instant high speed printing while maintaining the same molding precision quality, 200% faster than industry standard, enable you save more than half of printing time.

Linear Rail Guide & Three-Axis Linkage Technology; High-precision linear rail guide and Three-Axis Linkage Technology , providing higher printing accuracy and stability and printing speed, and lower noise.

【400mm/s High-Speed Printing】Pre-installed full Klipper firmware brings FLSUN V400 a 400m/s high-speed printing effect with no configuration required.With the same printing quality, the printing time can be saved by more than 70% compared with the mainstream 3D printer structure.

【Ultralight Short-range Extruder】FLSUN V400 is designed with ultra-light short-range extruder, and the extrusion force can reach 70N, which can meet the needs of high-speed printing of 400mm/s, especially suitable for printing flexible consumables and hard consumables such as PLA.

【Bi-Metal Construction】The extruder throat tube adopts a bi-metal structure, which can meet the high-temperature printing of 300 degrees.

200mm/s High-Speed Printing & 2800+ mm/s² acceleration & Three-Axis Linkage Technology; Equipped 3 x 48W High-Power stepper motor and Three-axis linkage technology support a normal printing speed of Flsun Super Racer （SR） 3D printer up to 200mm/s and 2800+ mm/s² acceleration, enjoy instant high speed printing while maintaining the same molding precision quality, 200% faster than industry standard, you can save more than half of printing time.

Linear Rail Guide & Three-Axis Linkage Technology; High-precision linear rail guide and Three-Axis Linkage Technology , providing higher printing accuracy and stability and printing speed, and lower noise.

Auto-Leveling System & Resume Printing Function & Removable Lattice Bed ; Automatic leveling system, easy to start printing, Flsun Super Racer 3D printer has the ability to resume printing even after a power outage or lapse occurs, Coated lattice glass platform, good filament viscosity, replaceable design.

<b>Save More Than Half of Printing Time; Flsun Super Racer 3D Printer normally 200mm/s high speed and high precision and stability printing, 2800+ acceleration.

<b>Large Printing Volume; 10.2"(L) x 10.2"(W) x 13"(H) / 260 x 260 x 330mm.

<b>Linear Rail Guide & Three-Axis Linkage Technology; High-precision linear rail guide and Three-Axis Linkage Technology , providing higher printing accuracy and stability and printing speed, and lower noise.

Item Size; diameter Φ265mm /Φ10.43 Inch, it is only applicable with FLSUN SR Super Racer.

Easy to adhere and Remove; Easy to adhere to the printing surface, easy to remove the prints,Prints can be easily removed by hand when the build surface cooled, gentle flexing of the plate will help remove it.

Excellent Performance; Removable,flexible,can stick to magnetic very well,high strength and heat resistance.Excellent adhesion,easy to Install,excellent flatness.

Fast Printing & Large Printing Size: The printing speed of FLSUN V400 3D printer is 400mm/s and 8000mm/s ² Acceleration, 400% faster than the industry standard, saving 70% of printing time. The larger print size is 10.2 inches (L) x 10.2 inches (W) x 13 inches (H)/260 x 260 x 330 mm.

Detachable PEI Spring Steel Platform: Make the first layer of printing more solid adhesion but easy to take off the model; The hot bed can be heated up to 110℃, suitable setting parameters can be printed various materials such as PLA, PETG, WOOD, ABS, PC, TPU.

Direct Extruder: It adopts ultra-light short-range extruder design, the extrusion force can reach 70N; and the throat adopts bi-metal structure, which can meet the high temperature printing of 300℃.

Save More Than 70% of Printing Time;Equipped 3 x 48W High Power stepper motor and Pre-installed Klipper Firmware Pad support a normal printing speed of Flsun V400 3D Printer up to 400mm/s and 8000+ mm/s² acceleration, enjoy instant high speed printing while maintaining the same molding precision quality, 400% faster than industry standard, enable you save more than 70% of printing time.

Φ300mmX410mm Large Printing Size; Large printing volume Φ11.8"（Diameter）x 16"(H) / Φ300mm（Diameter）X410mm.

FLSUN Speeder Pad & High-Speed Integrated Dual-Axis Linear Guide; Pre-installed Klipper Firmware 7 Inch FLSUN Speeder Pad Support Wifi Remote control & Wide-angle IPS. High-precision Dual-Axis linear rail guide, providing higher printing accuracy and stability, and lower noise.

【QIDI Third Generation Extruder Assembly】The two newly upgraded extruders of X-PLUSⅡ are dual-gear extruders with more accurate printing, better heat dissipation, and less clogging.The ordinary extruder has already been installed on the printer, and its max printing temperature is 250 ℃. It can work well with PLA, ABS, and TPU. The high-temperature extruder has a 300 ℃ maximum printing temperature, which can print Nylon, PA12-CF, and PC.

【Double Z-axis driver】 Ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.Large print size is 10.6x7.9x7.9 Inch.

【Filament detection function& Resume Printing】X-PLUSⅡis equipped with a filament runout sensor. When printing a large model, there is no need to worry about the filament depletion. It will ring to remind users.If a power outage occurs during the printing process, the printer will automatically save the breakpoint.

Newest Upgraded and More Convenient: Newest Wash and Cure machine added lens to UV lamp beads, the light source intensity distribution is more uniform, and the surface of the model is smoother. With the 360° automatic rotating curing table and added bottom reflector, the bottom curing has no dead ends, so that the entire model is cured more thoroughly

2-In-1 Wash and Cure Station: Dual functions of cleaning and curing can not only remove most of the chemicals, settle scrubbing and mess issues, but also seriously streamline the whole post-processing. It's a professional solution to the messy clean up job of your fabulous prints and also helps reduce the clutter on your desk. 1-60min time adjustable, customize knob cleaning and curing time. Each layer of the 3D printer model can be better cleaned and cured according to your DIY needs

Widely Compatibility: The ANYCUBIC wash and cure machine is a great addition to most type of regular resin printer, Compatible with most LCD/DLP/SLA 3D printers such as QIDI Shadow, NOVA, Mars series and other regular resin printers with similar build volume size as it does for photon series, this Wash & Cure machine has opened up a whole new world of 3d printing for you and greatly enhance your workflow

Filament Diameter: 1.75 mm; Shore Hardness: 95A; Dimensional Accuracy +/- 0.05 mm; 0.8 kg (approximately 1.76 lbs) per Spool; Vacuumed Sealed with Desiccant; Recommended extruder temperature:195 - 230°C; Recommended platform temperature: 40 - 60°C

SainSmart TPU filament is renowned for its high quality and ease of use, offering you a flexible and strong parts with consistency and smooth finish.

Compatibility: It is compatible with most FDM printers on the market that use 1.75 mm filament, including SainSmart x Creality, Prusa i3, Monoprice MakerSelect & Qidi, and other RepRap printers.

【4K Monochrome LCD】6.6-inch 4K monochrome LCD screen with a replaceable anti-scratch tempered glass with 9H hardness for a better light transmittance at 4098 x 2560 high resolution, protecting the screen while restoring model details to the greatest extent.

【Powerful COB Light Source】Upgraded free-form surface COB lens consists of 36 highly integrated UV LED lights, paired with Fresnel lens to deliver an even beam of 405nm wavelength for a more smooth surface finish and incredible printing quality.

【Large Build Volume】With a large build volume of 143.43×89.6×175 mm³ (5.647×3.52×6.8 in³), you can print one large model or undergo batch printing in a single job, which saves your time and greatly improves your productivity.

【10" 8K Monochrome LCD】ELEGOO Saturn 2 Resin 3D Printer adopts a 10-inch 8K mono LCD screen with an HD resolution of 7680x4320 and an ultra-fine XY resolution of 28.5 microns, outputting outstandingly detailed 3D models with a cure time of only 1-3s per layer. The scratch-resistant tempered glass above the LCD screen with 9H hardness for better light transmission and protection.

【43% Larger Printing Volume】With a build volume of 219x123x250mm / 8.62x4.84x9.84 inch and a 10” large mono LCD screen make the prototype size larger and the curing efficiency higher, you can print one larger model or multiple smaller models in a single batch.

【Fresnel Collimating Light Source】Fresnel collimating light source consists of 48 highly integrated UV LED lights that work with free-form surface COB lens and FCL system Fresnel lens to emit a uniform light beam of 405nm wavelength with 92% light uniformity, excellent printing accuracy, and a more smooth surface finish.

【Higher resolution and output】Mars 3 is ELEGOO's first desktop mSLA 3D printer with super-high precision. It adopts a 6.66 inches mono LCD with Ultra 4K HD resolution, which has a 30% higher XY resolution at 35μm and 37% higher build volume than Mars 2, delivering amazing 3D prints.

【The release film 2.0】With less release tension, the small and thin supports added to your model will be well-protected. Mars 3 has a greatly improved success rate when printing 3D models with lots of details.

【Upgraded light source】 36 highly integrated LED lights with a brand new COB lens that has a free-form surface can deliver over 90% uniformity of UV light illumination , making the printing accuracy upgraded to another level.

【Intelligent Time Control】The LED time display enable you to control the curing time conveniently.

【Light Driven Turntable】The light driven turntable is able to absorb UV light to rotate without battery.

【Reflective Sheet】There is reflective sheet inside the cabinet which have the lights focused to get a better curing effect.

Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.4 mm, out thread M6, Thread length 4mm; a set of 25pcs printer nozzles and 5 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle.

Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

Precision Process: Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs. Due to all of above, not only reduce the resistance, avoid filament getting stuck on nozzle, but also effectively guarantee the service life of the nozzle, make out of filament more smoother.

Approximately 250 grams, feet of filament on a spool with a case so it's not flopping all over the place. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Be sure you are ordering the correct diameter for your printer. This product is only available in 1.75mm.

Specially formulated plastic with increased amount of flexibility, with rigid structure. Recommended for printing objects, which will be impacted more than normal ones.

SAINSMART filament is 100% TPU. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Recommended for printing objects, which will be impacted more than normal ones.

Electrifying and intense, solid neon colors inject excitement and inspiration into designs. Enliven your work with these neon color filaments.

Filament Diameter: 1.75 mm; Shore Hardness: 95A; Dimensional Accuracy +/- 0.05 mm; 0.8 kg (approximately 1.76 lbs) per spool; Vacuumed sealed with desiccant; Recommended extruder temperature: 200- 220°C; Recommended platform temperature: 40 - 60°C

SainSmart TPU filament is renowned for its high quality and ease of use, offering you flexible and strong parts with consistency and smooth finish.

【300°High-temp Nozzle】Upgraded brass nozzle can stand up to 300°printing temperature and it is compatible with multiple filaments such as PLA, ABS, PVA, Wood, TPU, PRTG and PA which providing more possibilities for creation.

【Sprite Dual-Gear Direct Drive Extruder】Compatible with more filaments, Ender 3 S1 Pro 3d printer can print PLA, TPU, PETG, ABS.etc. It is more lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU.

【4.3 inch Touch Screen】The 4.3-inch touch screen supporting 9 languages, offers efficient UI interaction and is easy to use. It will dim out automatically for energy-saving if there is no action for 3 minutes.

Very easy to take off the models, NO tools to remove models

Use clips to fix the glass plate on the hot bed.

Higher temperature higher sticky. The models will stick on bed firmly when temperature is high

Easy to Remove Model within 1 Minute: The coating of the microporous composite material has a microporous structure. The filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily.

High Viscosity and Strong Adhesion: Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.

0.15MM of Flatness Recovery Model: This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness.

WELL MADE PEI SHEET- Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Our PEI bed is flexible, removable, and pei sheet can stick to magnetics very well. High strength and heat resistance.

ALL NEW FUNCTIONALITY - The flexible surface of the ender 3 Pro PEI bed can easily be cut to any dimension making it perfect for all build sizes and all FDM printer models.No more tape, no more glue, no more shovel, and release your printing anxiety.

EASY MODEL REMOVAL-The PEI spring steel 235x235 is easy to adhere to the printing surface, easy to remove the prints and flex slightly to pop your print right off.

【6.66” Ultra 4K Mono LCD】Equipped with 6.6” 4K monochrome LCD, Mars 3 Pro can prints out works at 35µm super high XY resolution. Build Volume 143×89×175mm/5.62×3.5×6.8in, 40% larger than Mars 2. A protective film is installed on the LCD to prevent resin leakage from damaging the screen

【High-End COB Light Source】New generation COB light structure is designed with 36 units LED lights, a free-form surface lens and a Fresnel lens, powerful and reliable, resulting in 92% and more uniform UV distribution for higher printing accuracy

【Comfortable Printing Experience】Build-in activated carbon reducing bad odor of resin, offer you a more comfortable and fresh experience. ATTENTION USB port next to the vat is for odor reducing facility ONLY

ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.

EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.

CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.

𝟔.𝟐𝟑" 𝐋𝐚𝐫𝐠𝐞 𝐒𝐜𝐫𝐞𝐞𝐧, Photon Mono 4K Resin 3D Printer is upgraded to a 6.23" Monochrome LCD screen, 29% larger than ANYCUBIC Photon's 5.5" screen. Rapid prototyping greatly improves printing efficiency by printing single layer in 1.5S. The LCD screen is more durable, 4X longer lifespan than RGB screen.

𝐋𝐚𝐫𝐠𝐞 𝐁𝐮𝐢𝐥𝐝 𝐕𝐨𝐥𝐮𝐦𝐞, ANYCUBIC Photon Mono 4K has a large printing size of 132mm x 80mm x 165mm /5.19" x 3.14" x 6.49", which leaves sufficient printing space and freedom for you to make any shapes of 3d models. The transparent top cover enables you to monitor the printing process while keeping 99.95% UV light blocking ratio, safe & easy for beginners.

𝟒𝐊 𝐇𝐢𝐠𝐡 𝐑𝐞𝐬𝐨𝐥𝐮𝐭𝐢𝐨𝐧, The 4K Monochrome LCD Screen has a HD resolution of 3840 x 2400, 35um XY pixels and 7% light transmittance, which means you can print all your models in a higher precision level. In addition, the contrast ratio is more than 350, making printing details more accurate and delicate, thus improving the printing quality and success rate

Amazing Print Volume: ANYCUBIC Photon M3 Max resin printer can print up to 13.0" x 11.7" x 6.5"/ 30.0 x 29.8 x 16.4 cm, the superior print volume can satisfy your creativity for large models and printing more models at once, higher printing efficiency.

7K High Resolution: The Large Photon M3 Max resin 3d Printer 7K UV LCD screen has a super high resolution (6,480 x 3,600 pixels). The screen contrast ratio is as high as 450:1, Print models with sharper details around edges and corners, improving print quality and success.

13.6" Screen & Protective Film: ANYCUBIC Photon M3 Max Large resin printer has a 13.6" oversized LCD screen achieve freedom of creation. Adds a replaceable anti-scratch film (comes with a protective film) to effectively prevent liquids from leaking to the LCD screen.

Extraordinary Printing Size, Anycubic Photon M3 Max with a 11.7'' x 6.5'' x 11.81'' building size, which is the largest one of Anycubic resin 3d printer so far. The practical printing volume can meet the printing needs of your large-scale models, while achieving batch printing and improving production efficiency.

Well-defined Print Details. comes with a 13.6’’ 7K HD Mono Screen, Photon m3 max achieves the large size printing while maintaining the precision of the model. Coupled with the Z-axis rail of the ball screw, and the high contrast ratio of 450:1, it can better reproduce the details, making your model more different.

Fast Printing Speed. The ANYCUBIC Photon M3 max mono screen is composed of 84 LED lights neatly arranged, providing a powerful matrix light source that shortens the printing time of each layer to 3 seconds, and can achieve fast printing of up to 60mm/h.

𝐇𝐢𝐠𝐡𝐞𝐫 𝐏𝐫𝐢𝐧𝐭𝐢𝐧𝐠 𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲, ANYCUBIC Photon Mono X 2 is equipped with a 9.1'' 4K+ large mono LCD screen with a resolution of 4096 x 2560, and a single pixel is able to reach 48μm, which is 4% higher than Photon Mono X, offering 3D printing enthusiasts a greater level of detail printing.

𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 𝐋𝐢𝐠𝐡𝐭 𝐒𝐨𝐮𝐫𝐜𝐞, Photon Mono X2 resin 3d printer adopts Anycubic LighTurbo matrix light source, which can project the UV light both parallel and perpendicular to the LCD screen, providing a much more uniform light exposure, thus improving the quality of printed model.

𝐒𝐭𝐚𝐛𝐥𝐞 𝐏𝐫𝐢𝐧𝐭𝐢𝐧𝐠 𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐞, The use of dual linear guides on the 3d machine Z-axis can effectively reduce the risk of layer shifting. Plus with POM clearance nut combined with a vibration absorption structure to ensure z-axis operation accuracy and eliminate layer lines, making the appearance of the model more smooth.