Best Fvscm in 2026

Workable for all popular powder fastening systems.

Ballistic point and smooth shank makes the penetrating easier and lower defect rate.

1" Diameter Washer increases bearing surface against the material to be fastened.

Workable for all popular powder fastening systems.

Ballistic point and smooth shank makes the penetrating easier and lower defect rate.

1" Diameter Washer increases bearing surface against the material to be fastened.

【Bulk Storage & Small Package】Dimension: 59”L x 26”W x 30”H. Max Capacity: 172 Gallon. It also takes less space to store and reset when not in use as its package size is only 7" X 7" X 31.5".

【Premium Fabric】 The waterproof fabric of outdoor storage box is made of 500D PVC tarpaulin. Its thickness is top of the line in soft outdoor storage boxes. It provides maximum protection for your belongings in extreme bad weather.

【Reduce Water Accumulation】 The gable roof of the deck box allows the rain to slide off the roof faster and reduces the possibility of ponding.

Workable for all popular powder fastening systems.

Ballistic point and smooth shank makes the penetrating easier and lower defect rate.

Heat treated pins are tough and durable to enable them to penetrate dense concrete, masonry or structural quality steel.

Increases bearing surface against the material to be fastened.

Increases bearing surface against the material to be fastened.

16 gauge metal Washer

Shank diameter = .145 head diameter = .300

Designed for use in treated lumber applications

Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel

Shank diameter = .145 Head diameter = .300

Powerful, low velocity, single shot actuated tool for fastening to concrete, masonry, or steel

Silencing handle eliminates unnecessary job-site noise

Innovative and ergonomic ejection slide

ITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel

Designed for use in treated lumber applications

Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel

Increases bearing surface against the material to be fastened.

16 gauge metal washer

Shank diameter = .145 Head diameter = .300

Use compatible with DT Systems Super-Pro Launcher, DT Super-Pro Remote Launchers,Retriev-R-Trainer, RRT Versa-Launch, and Lucky launcher II for dog training.

.22 CALIBOR retrieving dummy launcher ammo.

Color: Purple booster loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases

Designed For Use In Concrete And Structural Steel Applications

Washer Increases Bearing Surface Against The Material To Be Fastened

0.145" Shank Diameter

Use compatible with DT Systems Super-Pro Launcher, DT Super-Pro Remote Launchers,Retriev-R-Trainer, RRT Versa-Launch, and Lucky launcher II fog dog training.

High velocity, high powerful and high performance in penetrate straight to the wall, hollow block and concrete

Color: Purple booster loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases

Designed for use in treated lumber applications

Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel

Shank diameter = .145 Head diameter = .300

Increases bearing surface against the material to be fastened.

16 gauge metal washer

Shank diameter = .145 Head diameter = .300

100 counts per box.

Color Yellow, power level 4; Shall dimension: 0.22"(5.6 mm) diameter x 11 mm length.

Compatible with most low velocity powder actuated fastening tools brands.

Compatible with Ramset SA270, Cobra + and Viper tools, POWERS P3500, PA3500, P3600, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460, 2HNW6, 2HNW7 and all other 27 caliber clone tool; 10 yellow strips: each strip contains 10 pieces powder loads.

Help to provide the power to penetrate hollow block and concrete

Color: Yellow strips loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases

Workable for all popular powder fastening systems.

Ballistic point and smooth shank makes the penetrating easier and lower defect rate.

1" Diameter Washer increases bearing surface against the material to be fastened.

Compatible with Ramset SA270, Cobra + and Viper tools, POWERS P3500, PA3500, P3600, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460, 2HNW6, 2HNW7 and all other 27 caliber clone tool; 10 brown strips: each strip contains 10 pieces powder loads.

Help to provide the power to penetrate hollow block and concrete

Color: brown strips loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases

Workable for all popular powder fastening systems.

Ballistic point and smooth shank makes the penetrating easier and lower defect rate.

1" Diameter Washer increases bearing surface against the material to be fastened.

Power Tools and Accessories

Country of manufacture: United States

Manufacturer: Powers Fasteners

Washer pins - powder fastener actuated fastening system, Increases bearing surface against the material to be fastened.

16 gauge metal Washer

Shank diameter = .14Shank diameter = .145; head diameter = .300; shank length: 1"; round metal washer diameter: 1"5; head diameter = .300; shank length: 1"; round metal washer diameter: 1"

Semi automatic load adjuster

For commercial and residential construction. Fastener length: 1/2" - 2-1/2"

Uses .27 cal 10 loads strips.Compatible with most .27 caliber strip loads. Power levels: Green, Yellow, Red, Purple. (POWDER LOADS NOT INCLUDED).

Designed for permanently fastening a fixture to concrete, some types of masonry and steel.

Knurled shank designs are available to increase performance in steel base materials

100 per box

Compatible with Ramset SA270, Cobra + and Viper tools, POWERS P3500, PA3500, P3600, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460, 2HNW6, 2HNW7 and all other 27 caliber clone tool; 10 green strips: each strip contains 10 pieces powder loads.

Help to provide the power to penetrate heavy duty, hollow block and concrete

Color: Red strips loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases

Made in United States

Package length : 2.2"

Package width : 3.7"

Workable for all popular powder fastening systems.

Ballistic point and smooth shank makes the penetrating easier and lower defect rate.

Heat treated pins are tough and durable to enable them to penetrate dense concrete, masonry or structural quality steel.

...

Slim tool. Fits in tight spaces. 13.75" x 6" x 1.5". Weighs only 3.00 lbs. Automatic piston return. (Pole NOT included).

For use in Acoustical, Electrical and Mechanical overhead applications. Fastener length: 1/2" to 1-1/4"

Uses standard .27 cal. 10 shot strip loads. Power levels: Brown (2), Green (3), Yellow (4), Red (5).